From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Tue, 18 Apr 2017 12:22:04 +0800 Subject: [PATCH 2/3] ARM: sun8i: a83t: Drop leading zeroes from device node addresses In-Reply-To: <20170418042205.27894-1-wens@csie.org> References: <20170418042205.27894-1-wens@csie.org> Message-ID: <20170418042205.27894-3-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Kbuild now complains about leading zeroes in the address portion of device node names. Get rid of them. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a83t.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 913aacafe8d5..82cb87f21b96 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -162,7 +162,7 @@ #size-cells = <1>; ranges; - pio: pinctrl at 01c20800 { + pio: pinctrl at 1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; interrupts = , , @@ -193,7 +193,7 @@ }; }; - timer at 01c20c00 { + timer at 1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -201,14 +201,14 @@ clocks = <&osc24M>; }; - watchdog at 01c20ca0 { + watchdog at 1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; clocks = <&osc24M>; }; - uart0: serial at 01c28000 { + uart0: serial at 1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; @@ -218,7 +218,7 @@ status = "disabled"; }; - gic: interrupt-controller at 01c81000 { + gic: interrupt-controller at 1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, -- 2.11.0