* [GIT PULL] Amlogic 64-bit DT updates for v4.12 (redo)
@ 2017-04-05 0:31 Kevin Hilman
2017-04-19 12:29 ` Olof Johansson
0 siblings, 1 reply; 2+ messages in thread
From: Kevin Hilman @ 2017-04-05 0:31 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd, Olof,
Here's a redo of the Amlogic 64-bit DT updates for v4.12.
This DT branch includes all our DT updates, plus merges in a clock
branch that includes only clock header and binding updates which are
dependencies. This shared branch/tag is immutable and shared with the
clock tree.
I hope this iteration passes muster,
Kevin
The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64-redo
for you to fetch changes up to b2121170143bf4708c657461740c922ce24bc94e:
Merge tag 'amlogic-clk-headers' into v4.12/dt64 (2017-04-04 16:16:52 -0700)
----------------------------------------------------------------
Amlogic 64-bit DT updates for v4.12
- pinctrl: new pins for audio
- clocks: more clocks exposed for GFX, audio
- new board: Khadas Vim (S905X)
- new board: HwaCom AmazeTV (S905X)
- ethernet phy: add GPIO resets
----------------------------------------------------------------
Carlo Caione (3):
dt-bindings: Add vendor prefix for Hwacom Systems Inc.
dt-bindings: amlogic: Add HwaCom board
ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV
Heiner Kallweit (1):
ARM64: dts: meson-gxbb-odroidc2: Enable SARADC node
Jerome Brunet (1):
dt-bindings: clk: gxbb: expose i2s output clock gates
Kevin Hilman (1):
Merge tag 'amlogic-clk-headers' into v4.12/dt64
Martin Blumenstingl (14):
ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO
ARM64: dts: meson-gxbb-p201: fix ethernet support
ARM64: dts: amlogic: add the ethernet TX delay configuration
ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
ARM64: dts: meson-gxl: improve support for the P212 reference design
ARM64: dts: amlogic: meson-gxl: add the missing PWM pins
devicetree: add vendor prefix for Khadas
dt-bindings: amlogic: add the Khadas VIM
ARM64: dts: meson-gxl: add support for the Khadas VIM board
Neil Armstrong (18):
ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards
ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names
ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line
ARM64: dts: meson-gx: Finally move common nodes to GX dtsi
ARM64: dts: meson-gx: empty line cleanup
ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
ARM64: dts: meson-gxl: Add missing pinctrl pins groups
ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL
ARM64: dts: meson-gxbb: Add gpio-ranges properties
ARM64: dts: meson-gxl: Add gpio-ranges properties
ARM: dts: meson8: Add gpio-ranges properties
ARM: dts: meson8b: Add gpio-ranges properties
ARM64: dts: meson-gxbb: Add USB Hub GPIO hog
clk: meson-gxbb: Add MALI clock IDS
clk: meson-gxbb: Expose GP0 dt-bindings clock id
dt-bindings: clock: gxbb-clkc: Add GXL compatible variant
ARM64: dts: meson-gx: Add shared CMA dma memory pool
ARM64: dts: meson-gx: Add support for HDMI output
jbrunet (4):
ARM64: dts: meson-gxbb: add i2s output pins
ARM64: dts: meson-gxbb: add spdif output pins
ARM64: dts: meson-gxl: add i2s output pins
ARM64: dts: meson-gxl: add spdif output pins
Documentation/devicetree/bindings/arm/amlogic.txt | 3 +
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 3 +-
Documentation/devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/meson8.dtsi | 2 +
arch/arm/boot/dts/meson8b.dtsi | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 39 ++++++++++
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 80 +++++++++++++++++---
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 40 ++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 80 +++++++++++++++++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 25 +++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 +++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 29 ++++++--
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 21 +++++-
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26 +++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26 +++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 172 +++++++++++++++++++++++++++++++++++--------
arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 43 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 42 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 164 +++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 114 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 23 ++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 +++---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 +++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 1 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 194 +++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 25 +++++++
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 42 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 3 +
drivers/clk/meson/gxbb.h | 21 ++++--
include/dt-bindings/clock/gxbb-clkc.h | 11 +++
32 files changed, 1375 insertions(+), 66 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
^ permalink raw reply [flat|nested] 2+ messages in thread
* [GIT PULL] Amlogic 64-bit DT updates for v4.12 (redo)
2017-04-05 0:31 [GIT PULL] Amlogic 64-bit DT updates for v4.12 (redo) Kevin Hilman
@ 2017-04-19 12:29 ` Olof Johansson
0 siblings, 0 replies; 2+ messages in thread
From: Olof Johansson @ 2017-04-19 12:29 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Apr 04, 2017 at 05:31:59PM -0700, Kevin Hilman wrote:
> Hi Arnd, Olof,
>
> Here's a redo of the Amlogic 64-bit DT updates for v4.12.
>
> This DT branch includes all our DT updates, plus merges in a clock
> branch that includes only clock header and binding updates which are
> dependencies. This shared branch/tag is immutable and shared with the
> clock tree.
>
> I hope this iteration passes muster,
>
> Kevin
>
>
> The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
>
> Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64-redo
>
> for you to fetch changes up to b2121170143bf4708c657461740c922ce24bc94e:
>
> Merge tag 'amlogic-clk-headers' into v4.12/dt64 (2017-04-04 16:16:52 -0700)
>
> ----------------------------------------------------------------
> Amlogic 64-bit DT updates for v4.12
> - pinctrl: new pins for audio
> - clocks: more clocks exposed for GFX, audio
> - new board: Khadas Vim (S905X)
> - new board: HwaCom AmazeTV (S905X)
> - ethernet phy: add GPIO resets
Merged, thanks.
-Olof
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-04-19 12:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-04-05 0:31 [GIT PULL] Amlogic 64-bit DT updates for v4.12 (redo) Kevin Hilman
2017-04-19 12:29 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).