From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] regulator: arizona-micsupp: Move pdata into a separate structure
Date: Mon, 24 Apr 2017 12:50:09 +0100 [thread overview]
Message-ID: <20170424115009.ggzpw7odlsyg7per@dell> (raw)
In-Reply-To: <1492512234-19210-4-git-send-email-rf@opensource.wolfsonmicro.com>
On Tue, 18 Apr 2017, Richard Fitzgerald wrote:
> In preparation for sharing this driver with Madera, move the pdata
> for the micsupp regulator out of struct arizona_pdata into a dedicated
> pdata struct for this driver. As a result the code in
> arizona_micsupp_of_get_pdata() can be made independent of struct arizona.
>
> This patch also updates the definition of struct arizona_pdata and
> the use of this pdata in mach-crag6410-module.c
>
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> ---
> MAINTAINERS | 1 +
> drivers/regulator/arizona-micsupp.c | 21 +++++++++++----------
> include/linux/mfd/arizona/pdata.h | 3 ++-
Acked-by: Lee Jones <lee.jones@linaro.org>
> include/linux/regulator/arizona-micsupp.h | 21 +++++++++++++++++++++
> 4 files changed, 35 insertions(+), 11 deletions(-)
> create mode 100644 include/linux/regulator/arizona-micsupp.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c35e0ce..6ed8ef1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13623,6 +13623,7 @@ F: include/linux/mfd/arizona/
> F: include/linux/mfd/wm831x/
> F: include/linux/mfd/wm8350/
> F: include/linux/mfd/wm8400*
> +F: include/linux/regulator/arizona*
> F: include/linux/wm97xx.h
> F: include/sound/wm????.h
> F: sound/soc/codecs/arizona.?
> diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
> index 5e38861..5f8b5a7 100644
> --- a/drivers/regulator/arizona-micsupp.c
> +++ b/drivers/regulator/arizona-micsupp.c
> @@ -30,6 +30,8 @@
> #include <linux/mfd/arizona/pdata.h>
> #include <linux/mfd/arizona/registers.h>
>
> +#include <linux/regulator/arizona-micsupp.h>
> +
> struct arizona_micsupp {
> struct regulator_dev *regulator;
> struct arizona *arizona;
> @@ -199,28 +201,26 @@ static int arizona_micsupp_set_bypass(struct regulator_dev *rdev, bool ena)
> .num_consumer_supplies = 1,
> };
>
> -static int arizona_micsupp_of_get_pdata(struct device *dev,
> - struct arizona *arizona,
> +static int arizona_micsupp_of_get_pdata(struct arizona_micsupp_pdata *pdata,
> struct regulator_config *config,
> const struct regulator_desc *desc)
> {
> - struct arizona_pdata *pdata = &arizona->pdata;
> struct arizona_micsupp *micsupp = config->driver_data;
> struct device_node *np;
> struct regulator_init_data *init_data;
>
> - np = of_get_child_by_name(arizona->dev->of_node, "micvdd");
> + np = of_get_child_by_name(config->dev->of_node, "micvdd");
>
> if (np) {
> config->of_node = np;
>
> - init_data = of_get_regulator_init_data(dev, np, desc);
> + init_data = of_get_regulator_init_data(config->dev, np, desc);
>
> if (init_data) {
> init_data->consumer_supplies = &micsupp->supply;
> init_data->num_consumer_supplies = 1;
>
> - pdata->micvdd = init_data;
> + pdata->init_data = init_data;
> }
> }
>
> @@ -232,6 +232,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
> struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
> const struct regulator_desc *desc;
> struct regulator_config config = { };
> + struct arizona_micsupp_pdata *pdata = &arizona->pdata.micvdd;
> struct arizona_micsupp *micsupp;
> int ret;
>
> @@ -269,15 +270,15 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
>
> if (IS_ENABLED(CONFIG_OF)) {
> if (!dev_get_platdata(arizona->dev)) {
> - ret = arizona_micsupp_of_get_pdata(&pdev->dev, arizona,
> - &config, desc);
> + ret = arizona_micsupp_of_get_pdata(pdata, &config,
> + desc);
> if (ret < 0)
> return ret;
> }
> }
>
> - if (arizona->pdata.micvdd)
> - config.init_data = arizona->pdata.micvdd;
> + if (pdata->init_data)
> + config.init_data = pdata->init_data;
> else
> config.init_data = &micsupp->init_data;
>
> diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
> index 64faeef..43e875f 100644
> --- a/include/linux/mfd/arizona/pdata.h
> +++ b/include/linux/mfd/arizona/pdata.h
> @@ -12,6 +12,7 @@
> #define _ARIZONA_PDATA_H
>
> #include <dt-bindings/mfd/arizona.h>
> +#include <linux/regulator/arizona-micsupp.h>
>
> #define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */
> #define ARIZONA_GPN_DIR_SHIFT 15 /* GPN_DIR */
> @@ -79,7 +80,7 @@ struct arizona_pdata {
> int ldoena; /** GPIO controlling LODENA, if any */
>
> /** Regulator configuration for MICVDD */
> - struct regulator_init_data *micvdd;
> + struct arizona_micsupp_pdata micvdd;
>
> /** Regulator configuration for LDO1 */
> struct regulator_init_data *ldo1;
> diff --git a/include/linux/regulator/arizona-micsupp.h b/include/linux/regulator/arizona-micsupp.h
> new file mode 100644
> index 0000000..6168426
> --- /dev/null
> +++ b/include/linux/regulator/arizona-micsupp.h
> @@ -0,0 +1,21 @@
> +/*
> + * Platform data for Arizona micsupp regulator
> + *
> + * Copyright 2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef ARIZONA_MICSUPP_H
> +#define ARIZONA_MICSUPP_H
> +
> +struct regulator_init_data;
> +
> +struct arizona_micsupp_pdata {
> + /** Regulator configuration for micsupp */
> + const struct regulator_init_data *init_data;
> +};
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2017-04-24 11:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-18 10:43 [PATCH 0/7] regulator: arizona: Prepare for sharing with Madera codecs Richard Fitzgerald
2017-04-18 10:43 ` Richard Fitzgerald
2017-04-18 10:43 ` [PATCH 1/7] regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators Richard Fitzgerald
2017-04-25 15:46 ` Applied "regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators" to the regulator tree Mark Brown
2017-04-18 10:43 ` [PATCH 2/7] regulator: arizona-micsupp: Move pdata into a separate structure Richard Fitzgerald
2017-04-24 11:50 ` Lee Jones [this message]
2017-04-25 15:46 ` Applied "regulator: arizona-micsupp: Move pdata into a separate structure" to the regulator tree Mark Brown
2017-04-18 10:43 ` [PATCH 3/7] regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona Richard Fitzgerald
2017-04-25 15:46 ` Applied "regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona" to the regulator tree Mark Brown
2017-04-18 10:43 ` [PATCH 4/7] regulator: arizona-micsupp: Factor out generic initialization Richard Fitzgerald
2017-04-25 15:46 ` Applied "regulator: arizona-micsupp: Factor out generic initialization" to the regulator tree Mark Brown
2017-04-18 10:43 ` [PATCH 5/7] regulator: arizona-ldo1: Move pdata into a separate structure Richard Fitzgerald
2017-04-18 14:52 ` Krzysztof Kozlowski
2017-04-24 11:50 ` Lee Jones
2017-04-25 15:46 ` Applied "regulator: arizona-ldo1: Move pdata into a separate structure" to the regulator tree Mark Brown
2017-04-18 10:43 ` [PATCH 6/7] regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona Richard Fitzgerald
2017-04-25 15:46 ` Applied "regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona" to the regulator tree Mark Brown
2017-04-18 10:43 ` [PATCH 7/7] regulator: arizona-ldo1: Factor out generic initialization Richard Fitzgerald
2017-04-25 15:45 ` Applied "regulator: arizona-ldo1: Factor out generic initialization" to the regulator tree Mark Brown
2017-04-18 19:49 ` [PATCH 0/7] regulator: arizona: Prepare for sharing with Madera codecs Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170424115009.ggzpw7odlsyg7per@dell \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox