From mboxrd@z Thu Jan 1 00:00:00 1970 From: clabbe.montjoie@gmail.com (Corentin Labbe) Date: Mon, 1 May 2017 14:45:06 +0200 Subject: [PATCH v5 06/20] arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module In-Reply-To: <20170501124520.3769-1-clabbe.montjoie@gmail.com> References: <20170501124520.3769-1-clabbe.montjoie@gmail.com> Message-ID: <20170501124520.3769-7-clabbe.montjoie@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch add the dt node for the syscon register present on the Allwinner H3/H5 Only two register are present in this syscon and the only one useful is the one dedicated to EMAC clock.. Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 1aeeacb..d9691fc 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -83,6 +83,12 @@ #size-cells = <1>; ranges; + syscon: syscon at 1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + dma: dma-controller at 01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; -- 2.10.2