From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Wed, 3 May 2017 11:16:56 +0800 Subject: [PATCH v2 6/8] ARM: sun8i: a83t: Add CCU device nodes In-Reply-To: <20170503031658.29299-1-wens@csie.org> References: <20170503031658.29299-1-wens@csie.org> Message-ID: <20170503031658.29299-7-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that we have support for the A83T CCU, add a device node for it, and replace any existing placeholder clock phandles with the correct ones. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index c0a1e4f74b89..c9a5d07b2ada 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -162,13 +162,23 @@ #size-cells = <1>; ranges; + ccu: clock at 1c20000 { + compatible = "allwinner,sun8i-a83t-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc16Md512>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl at 1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; interrupts = , , ; reg = <0x01c20800 0x400>; - clocks = <&osc24M>; + clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -214,7 +224,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&ccu 53>; + resets = <&ccu 40>; status = "disabled"; }; -- 2.11.0