From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: arm64: Add flash node for ls1088a qds and rdb
Date: Fri, 5 May 2017 10:32:43 +0800 [thread overview]
Message-ID: <20170505023237.GV18578@dragon> (raw)
In-Reply-To: <1493889032-20857-2-git-send-email-prabhakar.kushwaha@nxp.com>
On Thu, May 04, 2017 at 02:40:32PM +0530, Prabhakar Kushwaha wrote:
> LS1088AQDS consist of NOR, NAND and FPGA connected over IFC
> LS1088ARDB consist of NAND and FPGA connected over IFC.
>
> So add flash information in ifc node of device tree.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Please fix the subject prefix.
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 27 +++++++++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 20 +++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ----
> 3 files changed, 47 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
> index 8c3cae5..ca7eb41 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
> @@ -53,6 +53,33 @@
> compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
> };
>
> +&ifc {
Please try to sort these labeled nodes alphabetically. That said, it
should be added after &i2c0.
> + #address-cells = <2>;
> + #size-cells = <1>;
The ifc node defined in fsl-ls1088a.dtsi already has them, right?
> + status = "okay";
> +
> + ranges = <0 0 0x5 0x80000000 0x08000000
> + 2 0 0x5 0x30000000 0x00010000
> + 3 0 0x5 0x20000000 0x00010000>;
> +
> + nor at 0,0 {
> + compatible = "cfi-flash";
> + reg = <0x0 0x0 0x8000000>;
> + bank-width = <2>;
> + device-width = <1>;
> + };
> +
> + nand at 2,0 {
> + compatible = "fsl,ifc-nand";
> + reg = <0x2 0x0 0x10000>;
> + };
> +
> + fpga: board-control at 3,0 {
> + compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
> + reg = <0x3 0x0 0x0000100>;
> + };
> +};
> +
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 8a04fbb..726e167 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -53,6 +53,26 @@
> compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
> };
>
> +&ifc {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + status = "okay";
> +
> + ranges = <0 0 0x5 0x30000000 0x00010000
> + 2 0 0x5 0x20000000 0x00010000>;
> +
> + nand at 0,0 {
> + compatible = "fsl,ifc-nand";
> + reg = <0x0 0x0 0x10000>;
> + };
> +
> + fpga: board-control at 2,0 {
> + compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
> + reg = <0x2 0x0 0x0000100>;
> + };
> +};
> +
> +
One newline is good enough.
Shawn
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 2946fd7..9f6bcb4 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -217,10 +217,6 @@
> #address-cells = <2>;
> #size-cells = <1>;
>
> - ranges = <0 0 0x5 0x80000000 0x08000000
> - 2 0 0x5 0x30000000 0x00010000
> - 3 0 0x5 0x20000000 0x00010000>;
> - status = "disabled";
> };
>
> i2c0: i2c at 2000000 {
> --
> 2.7.4
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-05-05 2:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-04 9:10 [PATCH] arch: arm64: Define big endian of IFC for LS1043a/LS1046a Prabhakar Kushwaha
2017-05-04 9:10 ` [PATCH] arm: arm64: Add flash node for ls1088a qds and rdb Prabhakar Kushwaha
2017-05-05 2:32 ` Shawn Guo [this message]
2017-05-05 2:20 ` [PATCH] arch: arm64: Define big endian of IFC for LS1043a/LS1046a Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170505023237.GV18578@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).