* [PATCH] arm64: dts: ls1088a: update the sata node
@ 2017-05-08 3:13 Yuantian Tang
2017-05-11 7:35 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Yuantian Tang @ 2017-05-08 3:13 UTC (permalink / raw)
To: linux-arm-kernel
1. Sata ecc should be disabled due to a erratum.
Provide the ecc register address for driver to use.
2. Enable dma coherence operation
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd7..90edd76 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -265,10 +265,13 @@
sata: sata at 3200000 {
compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
status = "disabled";
+ dma-coherent;
};
};
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH] arm64: dts: ls1088a: update the sata node
2017-05-08 3:13 [PATCH] arm64: dts: ls1088a: update the sata node Yuantian Tang
@ 2017-05-11 7:35 ` Shawn Guo
2017-05-11 7:57 ` Andy Tang
0 siblings, 1 reply; 3+ messages in thread
From: Shawn Guo @ 2017-05-11 7:35 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 08, 2017 at 11:13:29AM +0800, Yuantian Tang wrote:
> 1. Sata ecc should be disabled due to a erratum.
> Provide the ecc register address for driver to use.
This is a bit confusing. Are you saying that the ECC register address
is provided in DT for SATA driver to disable ECC function?
> 2. Enable dma coherence operation
>
> Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 2946fd7..90edd76 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -265,10 +265,13 @@
>
> sata: sata at 3200000 {
> compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
> - reg = <0x0 0x3200000 0x0 0x10000>;
> + reg = <0x0 0x3200000 0x0 0x10000>,
> + <0x0 0x20140520 0x0 0x4>;
> + reg-names = "ahci", "sata-ecc";
> interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen 4 3>;
> status = "disabled";
> + dma-coherent;
Please add it above 'status' line, which we generally keep at the bottom
of property list.
Shawn
> };
> };
>
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] arm64: dts: ls1088a: update the sata node
2017-05-11 7:35 ` Shawn Guo
@ 2017-05-11 7:57 ` Andy Tang
0 siblings, 0 replies; 3+ messages in thread
From: Andy Tang @ 2017-05-11 7:57 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
Please see my reply inline.
> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: Thursday, May 11, 2017 3:35 PM
> To: Andy Tang <andy.tang@nxp.com>
> Cc: mark.rutland at arm.com; devicetree at vger.kernel.org;
> catalin.marinas at arm.com; will.deacon at arm.com; robh+dt at kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH] arm64: dts: ls1088a: update the sata node
>
> On Mon, May 08, 2017 at 11:13:29AM +0800, Yuantian Tang wrote:
> > 1. Sata ecc should be disabled due to a erratum.
> > Provide the ecc register address for driver to use.
>
> This is a bit confusing. Are you saying that the ECC register address is
> provided in DT for SATA driver to disable ECC function?
>
Yes, we have a ECC register to control all the IP's ecc status.
This ECC register doesn't belong to any IP block.
> > 2. Enable dma coherence operation
> >
> > Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > index 2946fd7..90edd76 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > @@ -265,10 +265,13 @@
> >
> > sata: sata at 3200000 {
> > compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
> > - reg = <0x0 0x3200000 0x0 0x10000>;
> > + reg = <0x0 0x3200000 0x0 0x10000>,
> > + <0x0 0x20140520 0x0 0x4>;
> > + reg-names = "ahci", "sata-ecc";
> > interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&clockgen 4 3>;
> > status = "disabled";
> > + dma-coherent;
>
> Please add it above 'status' line, which we generally keep at the bottom of
> property list.
>
OK, Will resend this patch.
Thanks,
Andy
> Shawn
>
> > };
> > };
> >
> > --
> > 2.1.0.27.g96db324
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-05-11 7:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-05-08 3:13 [PATCH] arm64: dts: ls1088a: update the sata node Yuantian Tang
2017-05-11 7:35 ` Shawn Guo
2017-05-11 7:57 ` Andy Tang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox