linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: alex.bennee@linaro.org (Alex Bennée)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] KVM: arm: plug potential guest hardware debug leakage
Date: Thu, 11 May 2017 13:46:11 +0100	[thread overview]
Message-ID: <20170511124612.11212-2-alex.bennee@linaro.org> (raw)
In-Reply-To: <20170511124612.11212-1-alex.bennee@linaro.org>

From: Zhichao Huang <zhichao.huang@linaro.org>

Hardware debugging in guests is not intercepted currently, it means
that a malicious guest can bring down the entire machine by writing
to the debug registers.

This patch enable trapping of all debug registers, preventing the
guests to access the debug registers. This includes access to the
debug mode(DBGDSCR) in the guest world all the time which could
otherwise mess with the host state. Reads return 0 and writes are
ignored (RAZ_WI).

The result is the guest cannot detect any working hardware based debug
support. As debug exceptions are still routed to the guest normal
debug using software based breakpoints still works.

To support debugging using hardware registers we need to implement a
debug register aware world switch as well as special trapping for
registers that may affect the host state.

Signed-off-by: Zhichao Huang <zhichao.huang@linaro.org>
Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>

---
ajb v2:
 - don't (void) unused return value
 - fix some 0/1 bool usage
 - further re-factor to avoid hacky if (cp15) in trap path
ajb v1:
  - convert to C world switch
  - reword commit message
---
 arch/arm/include/asm/kvm_coproc.h |  3 +-
 arch/arm/kvm/coproc.c             | 77 ++++++++++++++++++++++++++++++---------
 arch/arm/kvm/handle_exit.c        |  4 +-
 arch/arm/kvm/hyp/switch.c         |  4 +-
 4 files changed, 66 insertions(+), 22 deletions(-)

diff --git a/arch/arm/include/asm/kvm_coproc.h b/arch/arm/include/asm/kvm_coproc.h
index 4917c2f7e459..e74ab0fbab79 100644
--- a/arch/arm/include/asm/kvm_coproc.h
+++ b/arch/arm/include/asm/kvm_coproc.h
@@ -31,7 +31,8 @@ void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table);
 int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run);
-int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
 
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index 3e5e4194ef86..c3ed6bd5ddf3 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -93,12 +93,6 @@ int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	return 1;
 }
 
-int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
-{
-	kvm_inject_undefined(vcpu);
-	return 1;
-}
-
 static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 {
 	/*
@@ -514,12 +508,7 @@ static int emulate_cp15(struct kvm_vcpu *vcpu,
 	return 1;
 }
 
-/**
- * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
- * @vcpu: The VCPU pointer
- * @run:  The kvm_run struct
- */
-int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+static struct coproc_params decode_64bit_hsr(struct kvm_vcpu *vcpu)
 {
 	struct coproc_params params;
 
@@ -533,9 +522,38 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf;
 	params.CRm = 0;
 
+	return params;
+}
+
+/**
+ * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_64bit_hsr(vcpu);
+
 	return emulate_cp15(vcpu, &params);
 }
 
+/**
+ * kvm_handle_cp14_64 -- handles a mrrc/mcrr trap on a guest CP14 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_64bit_hsr(vcpu);
+
+	/* raz_wi cp14 */
+	pm_fake(vcpu, &params, NULL);
+
+	/* handled */
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+	return 1;
+}
+
 static void reset_coproc_regs(struct kvm_vcpu *vcpu,
 			      const struct coproc_reg *table, size_t num)
 {
@@ -546,12 +564,7 @@ static void reset_coproc_regs(struct kvm_vcpu *vcpu,
 			table[i].reset(vcpu, &table[i]);
 }
 
-/**
- * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
- * @vcpu: The VCPU pointer
- * @run:  The kvm_run struct
- */
-int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu)
 {
 	struct coproc_params params;
 
@@ -565,9 +578,37 @@ int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7;
 	params.Rt2 = 0;
 
+	return params;
+}
+
+/**
+ * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_32bit_hsr(vcpu);
 	return emulate_cp15(vcpu, &params);
 }
 
+/**
+ * kvm_handle_cp14_32 -- handles a mrc/mcr trap on a guest CP14 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_32bit_hsr(vcpu);
+
+	/* raz_wi cp14 */
+	pm_fake(vcpu, &params, NULL);
+
+	/* handled */
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+	return 1;
+}
+
 /******************************************************************************
  * Userspace API
  *****************************************************************************/
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index 96af65a30d78..42f5daf715d0 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -95,9 +95,9 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[HSR_EC_WFI]		= kvm_handle_wfx,
 	[HSR_EC_CP15_32]	= kvm_handle_cp15_32,
 	[HSR_EC_CP15_64]	= kvm_handle_cp15_64,
-	[HSR_EC_CP14_MR]	= kvm_handle_cp14_access,
+	[HSR_EC_CP14_MR]	= kvm_handle_cp14_32,
 	[HSR_EC_CP14_LS]	= kvm_handle_cp14_load_store,
-	[HSR_EC_CP14_64]	= kvm_handle_cp14_access,
+	[HSR_EC_CP14_64]	= kvm_handle_cp14_64,
 	[HSR_EC_CP_0_13]	= kvm_handle_cp_0_13_access,
 	[HSR_EC_CP10_ID]	= kvm_handle_cp10_id,
 	[HSR_EC_HVC]		= handle_hvc,
diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c
index 92678b7bd046..624a510d31df 100644
--- a/arch/arm/kvm/hyp/switch.c
+++ b/arch/arm/kvm/hyp/switch.c
@@ -48,7 +48,9 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host)
 	write_sysreg(HSTR_T(15), HSTR);
 	write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR);
 	val = read_sysreg(HDCR);
-	write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR);
+	val |= HDCR_TPM | HDCR_TPMCR; /* trap performance monitors */
+	val |= HDCR_TDRA | HDCR_TDOSA | HDCR_TDA; /* trap debug regs */
+	write_sysreg(val, HDCR);
 }
 
 static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
-- 
2.11.0

  reply	other threads:[~2017-05-11 12:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-11 12:46 [PATCH v2 0/2] plug KVM ARMv7 debug leakage Alex Bennée
2017-05-11 12:46 ` Alex Bennée [this message]
2017-05-11 12:46 ` [PATCH v2 2/2] KVM: arm: rename pm_fake handler to trap_raz_wi Alex Bennée
2017-05-15 12:30 ` [PATCH v2 0/2] plug KVM ARMv7 debug leakage Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170511124612.11212-2-alex.bennee@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).