* [PATCH][v3] arm64: Add flash node for ls1088a qds and rdb
@ 2017-05-10 9:43 Prabhakar Kushwaha
2017-05-12 3:21 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Prabhakar Kushwaha @ 2017-05-10 9:43 UTC (permalink / raw)
To: linux-arm-kernel
LS1088AQDS consist of NOR, NAND and FPGA connected over IFC
LS1088ARDB consist of NAND and FPGA connected over IFC.
So add flash information in ifc node of device tree.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
---
changes for v2: Incorporated Shawn's comments
changes for v3: Incorporated Shawn's further comments
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 24 +++++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 16 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 +----
3 files changed, 41 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 8c3cae5..82e1615 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -110,6 +110,30 @@
};
};
+&ifc {
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nor at 0,0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand at 2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ fpga: board-control at 3,0 {
+ compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+ reg = <0x3 0x0 0x0000100>;
+ };
+};
+
&duart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8a04fbb..a93a588 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -94,6 +94,22 @@
};
};
+&ifc {
+ ranges = <0 0 0x5 0x30000000 0x00010000
+ 2 0 0x5 0x20000000 0x00010000>;
+ status = "okay";
+
+ nand at 0,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x0 0x0 0x10000>;
+ };
+
+ fpga: board-control at 2,0 {
+ compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+ reg = <0x2 0x0 0x0000100>;
+ };
+};
+
&duart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd7..e852b22 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -216,11 +216,8 @@
little-endian;
#address-cells = <2>;
#size-cells = <1>;
-
- ranges = <0 0 0x5 0x80000000 0x08000000
- 2 0 0x5 0x30000000 0x00010000
- 3 0 0x5 0x20000000 0x00010000>;
status = "disabled";
+
};
i2c0: i2c at 2000000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH][v3] arm64: Add flash node for ls1088a qds and rdb
2017-05-10 9:43 [PATCH][v3] arm64: Add flash node for ls1088a qds and rdb Prabhakar Kushwaha
@ 2017-05-12 3:21 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2017-05-12 3:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 10, 2017 at 03:13:23PM +0530, Prabhakar Kushwaha wrote:
> LS1088AQDS consist of NOR, NAND and FPGA connected over IFC
> LS1088ARDB consist of NAND and FPGA connected over IFC.
>
> So add flash information in ifc node of device tree.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
The subject prefix should be like 'arm64: dts: ...'.
> ---
> changes for v2: Incorporated Shawn's comments
> changes for v3: Incorporated Shawn's further comments
>
> arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 24 +++++++++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 16 +++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 +----
> 3 files changed, 41 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
> index 8c3cae5..82e1615 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
> @@ -110,6 +110,30 @@
> };
> };
>
> +&ifc {
> + ranges = <0 0 0x5 0x80000000 0x08000000
> + 2 0 0x5 0x30000000 0x00010000
> + 3 0 0x5 0x20000000 0x00010000>;
> + status = "okay";
> +
> + nor at 0,0 {
> + compatible = "cfi-flash";
> + reg = <0x0 0x0 0x8000000>;
> + bank-width = <2>;
> + device-width = <1>;
> + };
> +
> + nand at 2,0 {
> + compatible = "fsl,ifc-nand";
> + reg = <0x2 0x0 0x10000>;
> + };
> +
> + fpga: board-control at 3,0 {
> + compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
> + reg = <0x3 0x0 0x0000100>;
> + };
> +};
> +
> &duart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 8a04fbb..a93a588 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -94,6 +94,22 @@
> };
> };
>
> +&ifc {
> + ranges = <0 0 0x5 0x30000000 0x00010000
> + 2 0 0x5 0x20000000 0x00010000>;
> + status = "okay";
> +
> + nand at 0,0 {
> + compatible = "fsl,ifc-nand";
> + reg = <0x0 0x0 0x10000>;
> + };
> +
> + fpga: board-control at 2,0 {
> + compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
> + reg = <0x2 0x0 0x0000100>;
> + };
> +};
> +
> &duart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 2946fd7..e852b22 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -216,11 +216,8 @@
> little-endian;
> #address-cells = <2>;
> #size-cells = <1>;
> -
> - ranges = <0 0 0x5 0x80000000 0x08000000
> - 2 0 0x5 0x30000000 0x00010000
> - 3 0 0x5 0x20000000 0x00010000>;
> status = "disabled";
> +
This is an unrelated change, and should be dropped.
I fixed those up and applied patch.
Shawn
> };
>
> i2c0: i2c at 2000000 {
> --
> 2.7.4
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-05-12 3:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-05-10 9:43 [PATCH][v3] arm64: Add flash node for ls1088a qds and rdb Prabhakar Kushwaha
2017-05-12 3:21 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).