From: cdall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/9] KVM: arm/arm64: Allow setting the timer IRQ numbers from userspace
Date: Tue, 16 May 2017 20:45:52 +0200 [thread overview]
Message-ID: <20170516184556.26785-6-cdall@linaro.org> (raw)
In-Reply-To: <20170516184556.26785-1-cdall@linaro.org>
First we define an ABI using the vcpu devices that lets userspace set
the interrupt numbers for the various timers on both the 32-bit and
64-bit KVM/ARM implementations.
Second, we add the definitions for the groups and attributes introduced
by the above ABI. (We add the PMU define on the 32-bit side as well for
symmetry and it may get used some day.)
Third, we set up the arch-specific vcpu device operation handlers to
call into the timer code for anything related to the
KVM_ARM_VCPU_TIMER_CTRL group.
Fourth, we implement support for getting and setting the timer interrupt
numbers using the above defined ABI in the arch timer code.
Fifth, we introduce error checking upon enabling the arch timer (which
is called when first running a VCPU) to check that all VCPUs are
configured to use the same PPI for the timer (as mandated by the
architecture) and that the virtual and physical timers are not
configured to use the same IRQ number.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
---
Documentation/virtual/kvm/devices/vcpu.txt | 25 +++++++
arch/arm/include/uapi/asm/kvm.h | 8 +++
arch/arm/kvm/guest.c | 9 +++
arch/arm64/include/uapi/asm/kvm.h | 3 +
arch/arm64/kvm/guest.c | 9 +++
include/kvm/arm_arch_timer.h | 4 ++
virt/kvm/arm/arch_timer.c | 104 +++++++++++++++++++++++++++++
7 files changed, 162 insertions(+)
diff --git a/Documentation/virtual/kvm/devices/vcpu.txt b/Documentation/virtual/kvm/devices/vcpu.txt
index 352af6e..4800093 100644
--- a/Documentation/virtual/kvm/devices/vcpu.txt
+++ b/Documentation/virtual/kvm/devices/vcpu.txt
@@ -35,3 +35,28 @@ Returns: -ENODEV: PMUv3 not supported or GIC not initialized
Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel
virtual GIC implementation, this must be done after initializing the in-kernel
irqchip.
+
+
+2. GROUP: KVM_ARM_VCPU_TIMER_CTRL
+Architectures: ARM,ARM64
+
+2.1. ATTRIBUTE: KVM_ARM_VCPU_TIMER_IRQ_VTIMER
+2.2. ATTRIBUTE: KVM_ARM_VCPU_TIMER_IRQ_PTIMER
+Parameters: in kvm_device_attr.addr the address for the timer interrupt is a
+ pointer to an int
+Returns: -EINVAL: Invalid timer interrupt number
+ -EBUSY: One or more VCPUs has already run
+
+A value describing the architected timer interrupt number when connected to an
+in-kernel virtual GIC. These must be a PPI (16 <= intid < 32). Setting the
+attribute overrides the default values (see below).
+
+KVM_ARM_VCPU_TIMER_IRQ_VTIMER: The EL1 virtual timer intid (default: 27)
+KVM_ARM_VCPU_TIMER_IRQ_PTIMER: The EL1 physical timer intid (default: 30)
+
+Setting the same PPI for different timers will prevent the VCPUs from running.
+Setting the interrupt number on a VCPU configures all VCPUs created at that
+time to use the number provided for a given timer, overwriting any previously
+configured values on other VCPUs. Userspace should configure the interrupt
+numbers on@least one VCPU after creating all VCPUs and before running any
+VCPUs.
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
index 5e3c673..5db2d4c 100644
--- a/arch/arm/include/uapi/asm/kvm.h
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -203,6 +203,14 @@ struct kvm_arch_memory_slot {
#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff
#define VGIC_LEVEL_INFO_LINE_LEVEL 0
+/* Device Control API on vcpu fd */
+#define KVM_ARM_VCPU_PMU_V3_CTRL 0
+#define KVM_ARM_VCPU_PMU_V3_IRQ 0
+#define KVM_ARM_VCPU_PMU_V3_INIT 1
+#define KVM_ARM_VCPU_TIMER_CTRL 1
+#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
+#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
+
#define KVM_DEV_ARM_VGIC_CTRL_INIT 0
#define KVM_DEV_ARM_ITS_SAVE_TABLES 1
#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
index acea05e..1e0784e 100644
--- a/arch/arm/kvm/guest.c
+++ b/arch/arm/kvm/guest.c
@@ -308,6 +308,9 @@ int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
int ret;
switch (attr->group) {
+ case KVM_ARM_VCPU_TIMER_CTRL:
+ ret = kvm_arm_timer_set_attr(vcpu, attr);
+ break;
default:
ret = -ENXIO;
break;
@@ -322,6 +325,9 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int ret;
switch (attr->group) {
+ case KVM_ARM_VCPU_TIMER_CTRL:
+ ret = kvm_arm_timer_get_attr(vcpu, attr);
+ break;
default:
ret = -ENXIO;
break;
@@ -336,6 +342,9 @@ int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
int ret;
switch (attr->group) {
+ case KVM_ARM_VCPU_TIMER_CTRL:
+ ret = kvm_arm_timer_has_attr(vcpu, attr);
+ break;
default:
ret = -ENXIO;
break;
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 70eea2e..9f3ca24 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -232,6 +232,9 @@ struct kvm_arch_memory_slot {
#define KVM_ARM_VCPU_PMU_V3_CTRL 0
#define KVM_ARM_VCPU_PMU_V3_IRQ 0
#define KVM_ARM_VCPU_PMU_V3_INIT 1
+#define KVM_ARM_VCPU_TIMER_CTRL 1
+#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
+#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
/* KVM_IRQ_LINE irq field index values */
#define KVM_ARM_IRQ_TYPE_SHIFT 24
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index b37446a..5c7f657 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -390,6 +390,9 @@ int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
case KVM_ARM_VCPU_PMU_V3_CTRL:
ret = kvm_arm_pmu_v3_set_attr(vcpu, attr);
break;
+ case KVM_ARM_VCPU_TIMER_CTRL:
+ ret = kvm_arm_timer_set_attr(vcpu, attr);
+ break;
default:
ret = -ENXIO;
break;
@@ -407,6 +410,9 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
case KVM_ARM_VCPU_PMU_V3_CTRL:
ret = kvm_arm_pmu_v3_get_attr(vcpu, attr);
break;
+ case KVM_ARM_VCPU_TIMER_CTRL:
+ ret = kvm_arm_timer_get_attr(vcpu, attr);
+ break;
default:
ret = -ENXIO;
break;
@@ -424,6 +430,9 @@ int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
case KVM_ARM_VCPU_PMU_V3_CTRL:
ret = kvm_arm_pmu_v3_has_attr(vcpu, attr);
break;
+ case KVM_ARM_VCPU_TIMER_CTRL:
+ ret = kvm_arm_timer_has_attr(vcpu, attr);
+ break;
default:
ret = -ENXIO;
break;
diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h
index f1c967a..f0053f8 100644
--- a/include/kvm/arm_arch_timer.h
+++ b/include/kvm/arm_arch_timer.h
@@ -68,6 +68,10 @@ void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu);
u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid);
int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value);
+int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr);
+int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr);
+int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr);
+
bool kvm_timer_should_fire(struct arch_timer_context *timer_ctx);
void kvm_timer_schedule(struct kvm_vcpu *vcpu);
void kvm_timer_unschedule(struct kvm_vcpu *vcpu);
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index 6c5a064..d3d1dce 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -21,6 +21,7 @@
#include <linux/kvm_host.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/uaccess.h>
#include <clocksource/arm_arch_timer.h>
#include <asm/arch_timer.h>
@@ -617,6 +618,28 @@ void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu)
kvm_vgic_unmap_phys_irq(vcpu, vtimer->irq.irq);
}
+static bool timer_irqs_are_valid(struct kvm *kvm)
+{
+ struct kvm_vcpu *vcpu;
+ int vtimer_irq, ptimer_irq;
+ int i;
+
+ vcpu = kvm_get_vcpu(kvm, 0);
+ vtimer_irq = vcpu_vtimer(vcpu)->irq.irq;
+ ptimer_irq = vcpu_ptimer(vcpu)->irq.irq;
+
+ if (vtimer_irq == ptimer_irq)
+ return false;
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (vcpu_vtimer(vcpu)->irq.irq != vtimer_irq ||
+ vcpu_ptimer(vcpu)->irq.irq != ptimer_irq)
+ return false;
+ }
+
+ return true;
+}
+
int kvm_timer_enable(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
@@ -636,6 +659,11 @@ int kvm_timer_enable(struct kvm_vcpu *vcpu)
if (!vgic_initialized(vcpu->kvm))
return -ENODEV;
+ if (!timer_irqs_are_valid(vcpu->kvm)) {
+ kvm_debug("incorrectly configured timer irqs\n");
+ return -EINVAL;
+ }
+
/*
* Find the physical IRQ number corresponding to the host_vtimer_irq
*/
@@ -685,3 +713,79 @@ void kvm_timer_init_vhe(void)
val |= (CNTHCTL_EL1PCTEN << cnthctl_shift);
write_sysreg(val, cnthctl_el2);
}
+
+static void set_timer_irqs(struct kvm *kvm, int vtimer_irq, int ptimer_irq)
+{
+ struct kvm_vcpu *vcpu;
+ int i;
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ vcpu_vtimer(vcpu)->irq.irq = vtimer_irq;
+ vcpu_ptimer(vcpu)->irq.irq = ptimer_irq;
+ }
+}
+
+int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+ int __user *uaddr = (int __user *)(long)attr->addr;
+ struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
+ struct arch_timer_context *ptimer = vcpu_ptimer(vcpu);
+ int irq;
+
+ if (!irqchip_in_kernel(vcpu->kvm))
+ return -EINVAL;
+
+ if (get_user(irq, uaddr))
+ return -EFAULT;
+
+ if (!(irq_is_ppi(irq)))
+ return -EINVAL;
+
+ if (vcpu->arch.timer_cpu.enabled)
+ return -EBUSY;
+
+ switch (attr->attr) {
+ case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
+ set_timer_irqs(vcpu->kvm, irq, ptimer->irq.irq);
+ break;
+ case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
+ set_timer_irqs(vcpu->kvm, vtimer->irq.irq, irq);
+ break;
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+ int __user *uaddr = (int __user *)(long)attr->addr;
+ struct arch_timer_context *timer;
+ int irq;
+
+ switch (attr->attr) {
+ case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
+ timer = vcpu_vtimer(vcpu);
+ break;
+ case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
+ timer = vcpu_ptimer(vcpu);
+ break;
+ default:
+ return -ENXIO;
+ }
+
+ irq = timer->irq.irq;
+ return put_user(irq, uaddr);
+}
+
+int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+ switch (attr->attr) {
+ case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
+ case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
+ return 0;
+ }
+
+ return -ENXIO;
+}
--
2.9.0
next prev parent reply other threads:[~2017-05-16 18:45 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-16 18:45 [PATCH v2 0/9] Userspace timer IRQ number control and PMU with userspace-gic Christoffer Dall
2017-05-16 18:45 ` [PATCH v2 1/9] KVM: arm64: Allow creating the PMU without the in-kernel GIC Christoffer Dall
2017-05-23 16:52 ` Marc Zyngier
2017-05-24 8:38 ` Christoffer Dall
2017-05-24 9:16 ` Marc Zyngier
2017-05-24 11:45 ` Christoffer Dall
2017-05-24 16:37 ` Marc Zyngier
2017-06-01 10:53 ` Christoffer Dall
2017-05-16 18:45 ` [PATCH v2 2/9] KVM: arm: Handle VCPU device attributes in guest.c Christoffer Dall
2017-05-23 16:53 ` Marc Zyngier
2017-05-16 18:45 ` [PATCH v2 3/9] KVM: arm/arm64: Move irq_is_ppi() to header file Christoffer Dall
2017-05-23 17:10 ` Marc Zyngier
2017-05-16 18:45 ` [PATCH v2 4/9] KVM: arm/arm64: Move timer IRQ default init to arch_timer.c Christoffer Dall
2017-05-23 17:18 ` Marc Zyngier
2017-05-16 18:45 ` Christoffer Dall [this message]
2017-05-23 17:45 ` [PATCH v2 5/9] KVM: arm/arm64: Allow setting the timer IRQ numbers from userspace Marc Zyngier
2017-05-16 18:45 ` [PATCH v2 6/9] KVM: arm/arm64: Introduce an allocator for in-kernel irq lines Christoffer Dall
2017-05-16 18:45 ` [PATCH v2 7/9] KVM: arm/arm64: Check if irq lines to the GIC are already used Christoffer Dall
2017-05-16 18:45 ` [PATCH v2 8/9] KVM: arm/arm64: Disallow userspace control of in-kernel IRQ lines Christoffer Dall
2017-05-16 18:45 ` [PATCH v2 9/9] KVM: arm/arm64: Don't assume initialized vgic when setting PMU IRQ Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170516184556.26785-6-cdall@linaro.org \
--to=cdall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).