From mboxrd@z Thu Jan  1 00:00:00 1970
From: bjorn.andersson@linaro.org (Bjorn Andersson)
Date: Wed, 17 May 2017 12:33:15 -0700
Subject: [PATCH v2 1/5] pinctrl: qcom: Add ipq8074 pinctrl driver
In-Reply-To: <7afc7191-bcb1-a566-eac5-a4fe1293c773@codeaurora.org>
References: <1493898841-20583-1-git-send-email-varada@codeaurora.org>
 <1493898841-20583-2-git-send-email-varada@codeaurora.org>
 <20170510224355.GE45273@Bjorns-MacBook-Pro-2.local>
 <1f4c9974-f6a4-bee7-4f37-ad8795e442a3@codeaurora.org>
 <20170514042307.GE69278@Bjorns-MacBook-Pro-2.local>
 <7afc7191-bcb1-a566-eac5-a4fe1293c773@codeaurora.org>
Message-ID: <20170517193315.GF12920@tuxbook>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon 15 May 02:05 PDT 2017, Varadarajan Narayanan wrote:

> On 5/14/2017 9:53 AM, Bjorn Andersson wrote:
> > On Thu 11 May 03:33 PDT 2017, Varadarajan Narayanan wrote:
> > 
> > > On 5/11/2017 4:13 AM, Bjorn Andersson wrote:
> > > > On Thu 04 May 04:53 PDT 2017, Varadarajan Narayanan wrote:
[..]
> > > > > +	msm_mux_qpic_pad4,
> > > > 
> > > > What are qpic_pad and qpic_pad0 through qpic_pad8? Different functions,
> > > > alternative muxings...?
> > > 
> > > This is for the NAND and LCD display. The pins listed are the 9 data pins.
> > > 
> > 
> > Then you can describe them all as "qpic_pad" (or simply "qpic"?). (It's
> > possible to reference a partial group in the DTS, if that's necessary)
> 
> There are two sets of 9 pins, either of which can go to NAND or LCD.
> Will rename qpic_pad as qpic_a and qpic_pad[0-8] as qpic_b.
> Is that ok?
> 

So you have NAND and LCD hardware muxed to either "a" or "b" and then
you mux either "a" or "b" out onto actual pins?

How is this first mux configured?


I think the a/b scheme sounds reasonable, if above is how it works.

Regards,
Bjorn