linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: punit.agrawal@arm.com (Punit Agrawal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 04/11] arm64: hugetlb: Remove spurious calls to huge_ptep_offset
Date: Mon, 22 May 2017 15:39:51 +0100	[thread overview]
Message-ID: <20170522143958.12867-6-punit.agrawal@arm.com> (raw)
In-Reply-To: <20170522143958.12867-1-punit.agrawal@arm.com>

From: Steve Capper <steve.capper@arm.com>

We don't need to call huge_ptep_offset as our accessors are already
supplied with the pte_t *. This patch removes those spurious calls.

Cc: David Woods <dwoods@mellanox.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
---
 arch/arm64/mm/hugetlbpage.c | 37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 3058ec0fcedd..cb84ca33bc6b 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -200,21 +200,19 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 	if (pte_cont(*ptep)) {
 		int ncontig, i;
 		size_t pgsize;
-		pte_t *cpte;
 		bool is_dirty = false;
 
-		cpte = huge_pte_offset(mm, addr);
-		ncontig = find_num_contig(mm, addr, cpte, &pgsize);
+		ncontig = find_num_contig(mm, addr, ptep, &pgsize);
 		/* save the 1st pte to return */
-		pte = ptep_get_and_clear(mm, addr, cpte);
+		pte = ptep_get_and_clear(mm, addr, ptep);
 		for (i = 1, addr += pgsize; i < ncontig; ++i, addr += pgsize) {
 			/*
 			 * If HW_AFDBM is enabled, then the HW could
 			 * turn on the dirty bit for any of the page
 			 * in the set, so check them all.
 			 */
-			++cpte;
-			if (pte_dirty(ptep_get_and_clear(mm, addr, cpte)))
+			++ptep;
+			if (pte_dirty(ptep_get_and_clear(mm, addr, ptep)))
 				is_dirty = true;
 		}
 		if (is_dirty)
@@ -230,8 +228,6 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 			       unsigned long addr, pte_t *ptep,
 			       pte_t pte, int dirty)
 {
-	pte_t *cpte;
-
 	if (pte_cont(pte)) {
 		int ncontig, i, changed = 0;
 		size_t pgsize = 0;
@@ -239,12 +235,11 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 		/* Select all bits except the pfn */
 		pgprot_t hugeprot = pte_pgprot(pte);
 
-		cpte = huge_pte_offset(vma->vm_mm, addr);
-		pfn = pte_pfn(*cpte);
-		ncontig = find_num_contig(vma->vm_mm, addr, cpte,
+		pfn = pte_pfn(pte);
+		ncontig = find_num_contig(vma->vm_mm, addr, ptep,
 					  &pgsize);
-		for (i = 0; i < ncontig; ++i, ++cpte, addr += pgsize) {
-			changed |= ptep_set_access_flags(vma, addr, cpte,
+		for (i = 0; i < ncontig; ++i, ++ptep, addr += pgsize) {
+			changed |= ptep_set_access_flags(vma, addr, ptep,
 							pfn_pte(pfn,
 								hugeprot),
 							dirty);
@@ -261,13 +256,11 @@ void huge_ptep_set_wrprotect(struct mm_struct *mm,
 {
 	if (pte_cont(*ptep)) {
 		int ncontig, i;
-		pte_t *cpte;
 		size_t pgsize = 0;
 
-		cpte = huge_pte_offset(mm, addr);
-		ncontig = find_num_contig(mm, addr, cpte, &pgsize);
-		for (i = 0; i < ncontig; ++i, ++cpte, addr += pgsize)
-			ptep_set_wrprotect(mm, addr, cpte);
+		ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+		for (i = 0; i < ncontig; ++i, ++ptep, addr += pgsize)
+			ptep_set_wrprotect(mm, addr, ptep);
 	} else {
 		ptep_set_wrprotect(mm, addr, ptep);
 	}
@@ -278,14 +271,12 @@ void huge_ptep_clear_flush(struct vm_area_struct *vma,
 {
 	if (pte_cont(*ptep)) {
 		int ncontig, i;
-		pte_t *cpte;
 		size_t pgsize = 0;
 
-		cpte = huge_pte_offset(vma->vm_mm, addr);
-		ncontig = find_num_contig(vma->vm_mm, addr, cpte,
+		ncontig = find_num_contig(vma->vm_mm, addr, ptep,
 					  &pgsize);
-		for (i = 0; i < ncontig; ++i, ++cpte, addr += pgsize)
-			ptep_clear_flush(vma, addr, cpte);
+		for (i = 0; i < ncontig; ++i, ++ptep, addr += pgsize)
+			ptep_clear_flush(vma, addr, ptep);
 	} else {
 		ptep_clear_flush(vma, addr, ptep);
 	}
-- 
2.11.0

  parent reply	other threads:[~2017-05-22 14:39 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-22 14:39 [PATCH v3 00/11] arm64: Enable contiguous pte hugepage support Punit Agrawal
2017-05-22 14:39 ` Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 01/11] arm64: hugetlb: set_huge_pte_at Add WARN_ON on !pte_present Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 02/11] arm64: hugetlb: Refactor find_num_contig Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 03/11] arm64: hugetlb: Introduce pte_pgprot helper Punit Agrawal
2017-05-22 14:39 ` Punit Agrawal [this message]
2017-05-22 14:39 ` [PATCH v3 05/11] arm64: hugetlb: Spring clean huge pte accessors Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 06/11] arm64: hugetlb: Add break-before-make logic for contiguous entries Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 07/11] arm64: hugetlbpages: Handle swap entries in huge_pte_offset() for contiguous hugepages Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 08/11] arm64: hugetlb: Override huge_pte_clear() to support " Punit Agrawal
2017-05-22 16:45   ` [PATCH v3.1 8/11] " Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 09/11] arm64: hugetlb: Override set_huge_swap_pte_at() " Punit Agrawal
2017-05-22 16:48   ` [PATCH v3.1 9/11] " Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 10/11] arm64: Re-enable support for " Punit Agrawal
2017-05-22 14:39 ` [PATCH v3 11/11] arm64: hugetlb: Cleanup setup_hugepagesz Punit Agrawal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170522143958.12867-6-punit.agrawal@arm.com \
    --to=punit.agrawal@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).