From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] drm/pl111: add ARM_AMBA dependency
Date: Mon, 22 May 2017 18:32:31 +0200 [thread overview]
Message-ID: <20170522163231.bk6zltgzse4szm2o@kozik-lap> (raw)
In-Reply-To: <20170522152058.3346428-1-arnd@arndb.de>
On Mon, May 22, 2017 at 05:20:08PM +0200, Arnd Bergmann wrote:
> The driver is written in a way to enable compile-testing without CONFIG_ARM_AMBA,
> but it just causes needless warnings:
>
> drivers/gpu/drm/pl111/pl111_drv.c:149:26: error: 'pl111_drm_driver' defined but not used [-Werror=unused-variable]
> drivers/gpu/drm/pl111/pl111_drv.c:81:12: error: 'pl111_modeset_init' defined but not used [-Werror=unused-function]
>
> This removes the #ifdef instead, and adds a dependency on ARM_AMBA to
> only let us build the driver when the base support is enabled.
>
> Unfortunately, this requires removing one redundant 'select ARM_AMBA'
> line from mach-s3c64xx to avoid a circular dependency.
>
> It might be good to allow manually enabling ARM_AMBA when COMPILE_TEST
> is turned on, but that should be a separate patch and may cause other
> build regressions.
>
> Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/mach-s3c64xx/Kconfig | 1 -
> drivers/gpu/drm/pl111/Kconfig | 1 +
> drivers/gpu/drm/pl111/pl111_drv.c | 2 --
> 3 files changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index 459214fa20b4..5ee5ad74a3d6 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -40,7 +40,6 @@ config CPU_S3C6410
>
> config S3C64XX_PL080
> def_bool DMADEVICES
> - select ARM_AMBA
I must admit that I miss how pl111 DRM driver create circular dependency
with S3C64XX_PL080 (or AMBA_PL08X?). Maybe it is unrelated change and
should be a separate patch?
Best regards,
Krzysztof
> select AMBA_PL08X
>
> config S3C64XX_SETUP_SDHCI
> diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig
> index 309f4fd52de7..e2f393fcc4bf 100644
> --- a/drivers/gpu/drm/pl111/Kconfig
> +++ b/drivers/gpu/drm/pl111/Kconfig
> @@ -2,6 +2,7 @@ config DRM_PL111
> tristate "DRM Support for PL111 CLCD Controller"
> depends on DRM
> depends on ARM || ARM64 || COMPILE_TEST
> + depends on ARM_AMBA
> depends on COMMON_CLK
> select DRM_KMS_HELPER
> select DRM_KMS_CMA_HELPER
> diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
> index 97095b1aa961..dce382f97f8c 100644
> --- a/drivers/gpu/drm/pl111/pl111_drv.c
> +++ b/drivers/gpu/drm/pl111/pl111_drv.c
> @@ -179,7 +179,6 @@ static struct drm_driver pl111_drm_driver = {
> #endif
> };
>
> -#ifdef CONFIG_ARM_AMBA
> static int pl111_amba_probe(struct amba_device *amba_dev,
> const struct amba_id *id)
> {
> @@ -262,7 +261,6 @@ static struct amba_driver pl111_amba_driver = {
> };
>
> module_amba_driver(pl111_amba_driver);
> -#endif /* CONFIG_ARM_AMBA */
>
> MODULE_DESCRIPTION(DRIVER_DESC);
> MODULE_AUTHOR("ARM Ltd.");
> --
> 2.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-05-22 16:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-22 15:20 [PATCH] drm/pl111: add ARM_AMBA dependency Arnd Bergmann
2017-05-22 16:23 ` Eric Anholt
2017-05-22 21:43 ` Arnd Bergmann
2017-05-22 22:08 ` Eric Anholt
2017-05-24 15:52 ` Arnd Bergmann
2017-05-22 16:32 ` Krzysztof Kozlowski [this message]
2017-05-22 21:37 ` Arnd Bergmann
2017-05-23 11:17 ` Krzysztof Kozlowski
2017-05-23 11:22 ` Arnd Bergmann
2017-05-23 11:24 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170522163231.bk6zltgzse4szm2o@kozik-lap \
--to=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox