[PATCH 0/2] Enable Mailboxes for AM57xx IDKs

[PATCH 0/2] Enable Mailboxes for AM57xx IDKs

[Suman Anna]

Hi Tony,

This series enables the mailbox nodes to be used for communicating with
the DSPs and IPUs on AM57xx IDKs using IPC 3.x. The mailbox nodes themselves
were already defined/added before for other DRA7 boards, and these patches
simply enable the respective nodes for the IDKs.

Patches are based on 4.12-rc1 and are intended for the 4.13 merge
window.

regards
Suman

Suman Anna (2):
  ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6
  ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6

 arch/arm/boot/dts/am571x-idk.dts | 17 +++++++++++++++++
 arch/arm/boot/dts/am572x-idk.dts | 20 ++++++++++++++++++++
 2 files changed, 37 insertions(+)

-- 
2.12.0

[PATCH 1/2] ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6

[Suman Anna]

Enable the System Mailboxes 5 and 6 and the corresponding
child sub-mailbox (IPC 3.x) nodes for the AM572x IDK board.
This is needed to enable communication with the respective
remote processors IPU1, IPU2, DSP1 and DSP2 from the MPU.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/boot/dts/am572x-idk.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 8350b4b34b08..9da6d83ca185 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -91,3 +91,23 @@
 &pcie1 {
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
-- 
2.12.0

[PATCH 2/2] ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6

[Suman Anna]

Enable the System Mailboxes 5 and 6 and the corresponding
child sub-mailbox (IPC 3.x) nodes for the AM571x IDK board.
This is needed to enable communication with the respective
remote processors IPU1, IPU2, and DSP1 from the MPU.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/boot/dts/am571x-idk.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index ad68d1eb3bc3..7b207835b2d1 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -79,3 +79,20 @@
 	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
 	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
-- 
2.12.0

[PATCH 0/2] Enable Mailboxes for AM57xx IDKs

[Tony Lindgren]

* Suman Anna <s-anna@ti.com> [170519 13:51]:
> Hi Tony,
> 
> This series enables the mailbox nodes to be used for communicating with
> the DSPs and IPUs on AM57xx IDKs using IPC 3.x. The mailbox nodes themselves
> were already defined/added before for other DRA7 boards, and these patches
> simply enable the respective nodes for the IDKs.
> 
> Patches are based on 4.12-rc1 and are intended for the 4.13 merge
> window.

Applying into omap-for-v4.13/dt thanks.

Tony