From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.belloni@free-electrons.com (Alexandre Belloni) Date: Tue, 30 May 2017 23:50:44 +0200 Subject: [PATCH 03/58] ARM: dts: at91: at91rm9200ek: use TCB0 as clocksource In-Reply-To: <20170530215139.9983-1-alexandre.belloni@free-electrons.com> References: <20170530215139.9983-1-alexandre.belloni@free-electrons.com> Message-ID: <20170530215139.9983-4-alexandre.belloni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Use tcb0 as the clocksource like previously selected in at91_dt_defconfig. Tested-by: Alexandre Belloni Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91rm9200ek.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index f90e1c2d3caa..a446e12cbaa8 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -32,6 +32,18 @@ ahb { apb { + tcb0: timer at fffa0000 { + timer at 0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer at 2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + usb1: gadget at fffb0000 { atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; -- 2.11.0