[PATCH v2 2/5] dt-bindings : Document the STM32F4 CRC32 binding

[cosardindar@gmail.com (Cosar Dindar)]

On Tue, May 30, 2017 at 05:50:24PM -0500, Rob Herring wrote:
> On Sat, May 20, 2017 at 04:32:12PM +0300, Cosar Dindar wrote:
> > Add device tree binding for STM32F4.
> > 
> > Signed-off-by: Cosar Dindar <cosardindar@gmail.com>
> > ---
> >  Documentation/devicetree/bindings/crypto/st,stm32-crc.txt | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> > index 3ba92a5..7b30f1e 100644
> > --- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> > +++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> > @@ -1,7 +1,7 @@
> >  * STMicroelectronics STM32 CRC
> >  
> >  Required properties:
> > -- compatible: Should be "st,stm32f7-crc".
> > +- compatible: Can be either "st,stm32f7-crc" or "st,srm32f4-crc".
> 
> Here you say either, but the example has both.
>
Thanks for reviewing. Here it could be changed as :
	Should be one of the following string
	      "st,stm32f7-crc"
	      "st,stm32f4-crc"

Also, example may not contain both binding strings, I think. It could be leaved unchanged
as in the previous version. I will make these changes with this way if it is OK.

> >  - reg: The address and length of the peripheral registers space
> >  - clocks: The input clock of the CRC instance
> >  
> > @@ -10,7 +10,7 @@ Optional properties: none
> >  Example:
> >  
> >  crc: crc at 40023000 {
> > -	compatible = "st,stm32f7-crc";
> > +	compatible = "st,stm32f7-crc", "st,stm32f4-crc";
> >  	reg = <0x40023000 0x400>;
> >  	clocks = <&rcc 0 12>;
> >  };
> > -- 
> > 2.7.4
> >