[PATCH] ARM: dts: am43xx-clocks: Add support for CLKOUT2

[PATCH] ARM: dts: am43xx-clocks: Add support for CLKOUT2

[Peter Ujfalusi]

Add the needed clock nodes for the CLKOUT2 to be usable by boards.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm/boot/dts/am43xx-clocks.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index d1d73b725f47..430be5829f8f 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -833,4 +833,40 @@
 		ti,bit-shift = <23>;
 		reg = <0x4100>;
 	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>;
+		reg = <0x4108>;
+	};
+
+	clkout2_pre_div_ck: clkout2_pre_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4108>;
+	};
+
+	clkout2_post_div_ck: clkout2_post_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4108>;
+	};
+
+	clkout2_ck: clkout2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_post_div_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4108>;
+	};
 };
-- 
2.13.0

[PATCH] ARM: dts: am43xx-clocks: Add support for CLKOUT2

[Tony Lindgren]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [170524 01:47]:
> Add the needed clock nodes for the CLKOUT2 to be usable by boards.

Tero, care to ack?

Regards,

Tony

[PATCH] ARM: dts: am43xx-clocks: Add support for CLKOUT2

[Tero Kristo]

On 26/05/17 18:52, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [170524 01:47]:
>> Add the needed clock nodes for the CLKOUT2 to be usable by boards.
>
> Tero, care to ack?

I can't test the actual clock itself but the patch looks fine based on 
TRM, and doesn't seem to cause any issues either so:

Acked-by: Tero Kristo <t-kristo@ti.com>

[PATCH] ARM: dts: am43xx-clocks: Add support for CLKOUT2

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [170529 01:31]:
> On 26/05/17 18:52, Tony Lindgren wrote:
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [170524 01:47]:
> > > Add the needed clock nodes for the CLKOUT2 to be usable by boards.
> > 
> > Tero, care to ack?
> 
> I can't test the actual clock itself but the patch looks fine based on TRM,
> and doesn't seem to cause any issues either so:
> 
> Acked-by: Tero Kristo <t-kristo@ti.com>

OK thanks applying into omap-for-v4.13/dt.

Tony