From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 16/34] [media] add Omnivision OV5640 sensor driver
Date: Wed, 31 May 2017 21:58:21 +0200 [thread overview]
Message-ID: <20170531195821.GA16962@amd> (raw)
In-Reply-To: <1495672189-29164-17-git-send-email-steve_longerbeam@mentor.com>
Hi!
> +/* min/typical/max system clock (xclk) frequencies */
> +#define OV5640_XCLK_MIN 6000000
> +#define OV5640_XCLK_MAX 24000000
> +
> +/*
> + * FIXME: there is no subdev API to set the MIPI CSI-2
> + * virtual channel yet, so this is hardcoded for now.
> + */
> +#define OV5640_MIPI_VC 1
Can the FIXME be fixed?
> +/*
> + * image size under 1280 * 960 are SUBSAMPLING
-> Image
> + * image size upper 1280 * 960 are SCALING
above?
> +/*
> + * FIXME: all of these register tables are likely filled with
> + * entries that set the register to their power-on default values,
> + * and which are otherwise not touched by this driver. Those entries
> + * should be identified and removed to speed register load time
> + * over i2c.
> + */
load->loading? Can the FIXME be fixed?
> + /* Auto/manual exposure */
> + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
> + V4L2_CID_EXPOSURE_AUTO,
> + V4L2_EXPOSURE_MANUAL, 0,
> + V4L2_EXPOSURE_AUTO);
> + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops,
> + V4L2_CID_EXPOSURE_ABSOLUTE,
> + 0, 65535, 1, 0);
Is exposure_absolute supposed to be in microseconds...?
> + /* Auto/manual gain */
> + ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
> + 0, 1, 1, 1);
> + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
> + 0, 1023, 1, 0);
> +
> + ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
> + 0, 255, 1, 64);
> + ctrls->hue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HUE,
> + 0, 359, 1, 0);
> + ctrls->contrast = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST,
> + 0, 255, 1, 0);
> + ctrls->test_pattern =
> + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(test_pattern_menu) - 1,
> + 0, 0, test_pattern_menu);
> +
It is good to see sensor that has autogain/etc. I'm emulating them in
v4l-utils, and hardware that supports it is a good argument.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170531/4a85ce8e/attachment.sig>
next prev parent reply other threads:[~2017-05-31 19:58 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-25 0:29 [PATCH v7 00/34] i.MX Media Driver Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 01/34] dt-bindings: Add bindings for video-multiplexer device Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 02/34] [media] dt-bindings: Add bindings for i.MX media driver Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 03/34] [media] dt/bindings: Add bindings for OV5640 Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 04/34] ARM: dts: imx6qdl: add multiplexer controls Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 05/34] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 06/34] ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 07/34] ARM: dts: imx6qdl: add capture-subsystem device Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 08/34] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 09/34] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 10/34] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 11/34] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 12/34] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 13/34] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 14/34] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 15/34] add mux and video interface bridge entity functions Steve Longerbeam
2017-05-29 13:37 ` Hans Verkuil
2017-05-29 13:51 ` Philipp Zabel
2017-05-29 13:52 ` Hans Verkuil
2017-05-25 0:29 ` [PATCH v7 16/34] [media] add Omnivision OV5640 sensor driver Steve Longerbeam
2017-05-29 13:39 ` Hans Verkuil
2017-05-29 15:55 ` Sakari Ailus
2017-05-29 21:50 ` Steve Longerbeam
2017-05-30 6:56 ` Sakari Ailus
2017-06-03 18:02 ` Steve Longerbeam
2017-06-04 18:00 ` Steve Longerbeam
2017-06-07 12:31 ` Sakari Ailus
2017-05-31 19:58 ` Pavel Machek [this message]
2017-06-01 8:26 ` Sakari Ailus
2017-06-01 8:43 ` exposure vs. exposure_absolute was " Pavel Machek
2017-06-03 19:38 ` Steve Longerbeam
2017-06-03 19:51 ` Pavel Machek
2017-06-03 21:57 ` Sakari Ailus
2017-06-03 22:17 ` Pavel Machek
2017-06-04 4:46 ` Steve Longerbeam
2017-06-07 12:31 ` Sakari Ailus
2017-05-25 0:29 ` [PATCH v7 17/34] platform: add video-multiplexer subdevice driver Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 18/34] platform: video-mux: include temporary mmio-mux support Steve Longerbeam
2017-05-25 7:51 ` kbuild test robot
2017-05-25 7:51 ` [PATCH] platform: video-mux: fix ptr_ret.cocci warnings kbuild test robot
2017-05-25 0:29 ` [PATCH v7 19/34] media: Add userspace header file for i.MX Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 21/34] media: imx: Add Capture Device Interface Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 22/34] media: imx: Add CSI subdev driver Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 23/34] media: imx: Add VDIC " Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 24/34] media: imx: Add IC subdev drivers Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 25/34] media: imx: Add MIPI CSI-2 Receiver subdev driver Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 26/34] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 27/34] media: imx: csi: add support for bayer formats Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 28/34] media: imx: csi: increase burst size for YUV formats Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 29/34] media: imx: csi: add frame skipping support Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 30/34] media: imx: csi: add sink selection rectangles Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 31/34] media: imx: csi: add frame size/interval enumeration Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 32/34] media: imx: capture: add frame sizes/interval enumeration Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 33/34] media: imx: set and propagate default field, colorimetry Steve Longerbeam
2017-05-25 0:29 ` [PATCH v7 34/34] media: imx: Drop warning upon multiple S_STREAM disable calls Steve Longerbeam
2017-05-29 13:46 ` [PATCH v7 00/34] i.MX Media Driver Hans Verkuil
2017-05-29 14:15 ` Philipp Zabel
2017-05-29 14:21 ` Hans Verkuil
2017-05-29 15:24 ` Hans Verkuil
2017-05-29 15:36 ` Sakari Ailus
2017-05-29 16:29 ` Hans Verkuil
2017-05-29 18:12 ` Steve Longerbeam
2017-05-31 20:11 ` Pavel Machek
2017-05-29 17:23 ` Steve Longerbeam
2017-05-29 17:29 ` Hans Verkuil
2017-06-02 0:25 ` Tim Harvey
2017-06-02 0:43 ` Steve Longerbeam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170531195821.GA16962@amd \
--to=pavel@ucw.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).