From mboxrd@z Thu Jan  1 00:00:00 1970
From: hzpeterchen@gmail.com (Peter Chen)
Date: Tue, 6 Jun 2017 09:32:17 +0800
Subject: [PATCH v14 4/7] usb: core: add power sequence handling for USB
 devices
In-Reply-To: <Pine.LNX.4.44L0.1706051013300.1795-100000@iolanthe.rowland.org>
References: <20170605065537.GE20014@b29397-desktop>
 <Pine.LNX.4.44L0.1706051013300.1795-100000@iolanthe.rowland.org>
Message-ID: <20170606013217.GA26189@b29397-desktop>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, Jun 05, 2017 at 10:16:34AM -0400, Alan Stern wrote:
> On Mon, 5 Jun 2017, Peter Chen wrote:
> 
> > On Thu, May 18, 2017 at 08:49:00AM +0800, Peter Chen wrote:
> > > Some hard-wired USB devices need to do power sequence to let the
> > > device work normally, the typical power sequence like: enable USB
> > > PHY clock, toggle reset pin, etc. But current Linux USB driver
> > > lacks of such code to do it, it may cause some hard-wired USB devices
> > > works abnormal or can't be recognized by controller at all.
> > > 
> > > In this patch, it calls power sequence library APIs to finish
> > > the power sequence events. It will do power on sequence at hub's
> > > probe for all devices under this hub (includes root hub).
> > > At hub_disconnect, it will do power off sequence which is at powered
> > > on list.
> > > 
> > 
> > Greg, Alan, would you please help on reviewing it? It seems Rafael
> > is waiting for USB MAINTAINERS's comments or ack. It resolves some
> > USB HUB issues for several persons.
> > 
> > Peter
> > 
> > > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > > Tested-by Joshua Clayton <stillcompiling@gmail.com>
> > > Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
> > > Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
> 
> Acked-by: Alan Stern <stern@rowland.harvard.edu>
> 
> > > ---
> > >  drivers/usb/Kconfig    |  1 +
> > >  drivers/usb/core/hub.c | 49 +++++++++++++++++++++++++++++++++++++++++++++----
> > >  drivers/usb/core/hub.h |  1 +
> > >  3 files changed, 47 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> > > index 939a63b..b6f626e 100644
> > > --- a/drivers/usb/Kconfig
> > > +++ b/drivers/usb/Kconfig
> > > @@ -39,6 +39,7 @@ config USB
> > >  	tristate "Support for Host-side USB"
> > >  	depends on USB_ARCH_HAS_HCD
> > >  	select USB_COMMON
> > > +	select POWER_SEQUENCE
> > >  	select NLS  # for UTF-8 strings
> > >  	---help---
> > >  	  Universal Serial Bus (USB) is a specification for a serial bus
> > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > > index 9dca59e..7a67296 100644
> > > --- a/drivers/usb/core/hub.c
> > > +++ b/drivers/usb/core/hub.c
> > > @@ -28,6 +28,7 @@
> > >  #include <linux/mutex.h>
> > >  #include <linux/random.h>
> > >  #include <linux/pm_qos.h>
> > > +#include <linux/power/pwrseq.h>
> > >  
> > >  #include <linux/uaccess.h>
> > >  #include <asm/byteorder.h>
> > > @@ -1619,6 +1620,7 @@ static void hub_disconnect(struct usb_interface *intf)
> > >  	hub->error = 0;
> > >  	hub_quiesce(hub, HUB_DISCONNECT);
> > >  
> > > +	of_pwrseq_off_list(&hub->pwrseq_on_list);
> 
> Things like this look a little peculiar -- you are passing an "on_list" 
> to a function named "...off_list".
> 
> How about naming the new field hub->pwrseq_list instead?
> 

Thanks, Alan. I will change it at next revision.

-- 

Best Regards,
Peter Chen