From: guodong.xu@linaro.org (Guodong Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/8] MFD: add driver for HiSilicon Hi6421v530 PMIC
Date: Tue, 6 Jun 2017 16:51:35 +0800 [thread overview]
Message-ID: <20170606085143.13154-1-guodong.xu@linaro.org> (raw)
This patchset adds driver for HiSilicon Hi6421v530 PMIC.
Mainline kernel already has driver support to a similar chip, Hi6421.
Hi6421 and Hi6421v530 are both from the same vendor, HiSilicon, but
they are at different revisions. They both use the same Memory-mapped
I/O method to communicate with Main SoC. However, they differ quite a
lot in their regulator designs. Eg. they have completely different LDO
voltage points.
Patch 1 and 2 are hi6421-pmic cleaning up.
Patch 3 and 4 extends hi6421-pmic-core.c to support Hi6421v530 revision.
Patch 5 add hi6421v530-regulator.c driver for LDO regulators.
Patch 6 fixes an issue for hi6421 regulator, which is not related to v530
but it's found in this review.
Patch 7 is dts change, it depends on and can be applied to hi3660/hikey960
patchset [1].
Patch 8 enables the relevant config items.
[1], http://www.spinics.net/lists/devicetree/msg178303.html
Major changes in v4:
- put hi6421-pmic cleanup in separate patches.
- solve review comments from Lee Johes.
- regulator-name should not have '/' character. Otherwise it "Failed to
create debugfs directory"
Major changes in v3:
- in hi6421-pmic-core.c
* use shorter license script.
* arrange #include in alphabetical order.
* using recommended error log messages from Lee Jones.
- in hi6421v530-regulator.c
* remove unused #include files
* arrange remaining ones in alphabetical order.
Major changes in v2:
- instead of writing a new driver, extend hi6421-pmic-core.c
to support its v530 revision
- update hi6421v530-regulator.c to use modern regulator driver
design logics.
Guodong Xu (6):
mfd: hi6421-pmic: cleanup: change license text to shorter form
mfd: hi6421-pmic: cleanup: update dev_err messages
dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
mfd: hi6421-pmic: add support for HiSilicon Hi6421v530
regulator: hi6421: Describe consumed platform device
arm64: defconfig: enable support hi6421v530 PMIC
Wang Xiaoyin (2):
regulator: hi6421v530: add driver for hi6421v530 voltage regulator
arm64: dts: hikey960: add device node for pmic and regulators
Documentation/devicetree/bindings/mfd/hi6421.txt | 4 +-
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++
arch/arm64/configs/defconfig | 2 +
drivers/mfd/hi6421-pmic-core.c | 87 +++++----
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421-regulator.c | 7 +
drivers/regulator/hi6421v530-regulator.c | 207 ++++++++++++++++++++++
include/linux/mfd/hi6421-pmic.h | 5 +
9 files changed, 336 insertions(+), 33 deletions(-)
create mode 100644 drivers/regulator/hi6421v530-regulator.c
--
2.10.2
next reply other threads:[~2017-06-06 8:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 8:51 Guodong Xu [this message]
2017-06-06 8:51 ` [PATCH v4 1/8] mfd: hi6421-pmic: cleanup: change license text to shorter form Guodong Xu
2017-06-06 13:49 ` Lee Jones
2017-06-06 8:51 ` [PATCH v4 2/8] mfd: hi6421-pmic: cleanup: update dev_err messages Guodong Xu
2017-06-06 13:50 ` Lee Jones
2017-06-06 8:51 ` [PATCH v4 3/8] dt-bindings: mfd: hi6421: Add hi6421v530 compatible string Guodong Xu
2017-06-06 8:51 ` [PATCH v4 4/8] mfd: hi6421-pmic: add support for HiSilicon Hi6421v530 Guodong Xu
2017-06-06 13:54 ` Lee Jones
2017-06-07 7:04 ` Guodong Xu
2017-06-06 8:51 ` [PATCH v4 5/8] regulator: hi6421v530: add driver for hi6421v530 voltage regulator Guodong Xu
2017-06-06 8:51 ` [PATCH v4 6/8] regulator: hi6421: Describe consumed platform device Guodong Xu
2017-06-06 8:51 ` [PATCH v4 7/8] arm64: dts: hikey960: add device node for pmic and regulators Guodong Xu
2017-06-06 8:51 ` [PATCH v4 8/8] arm64: defconfig: enable support hi6421v530 PMIC Guodong Xu
2017-06-06 12:54 ` [PATCH v4 0/8] MFD: add driver for HiSilicon Hi6421v530 PMIC Arnd Bergmann
2017-06-06 13:58 ` Lee Jones
2017-06-07 7:12 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606085143.13154-1-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).