[PATCH v2 7/8] net: mvmdio: add xmdio support

[linux@armlinux.org.uk (Russell King - ARM Linux)]

On Fri, Jun 09, 2017 at 06:22:16PM +0200, Antoine Tenart wrote:
> On Fri, Jun 09, 2017 at 05:03:40PM +0200, Andrew Lunn wrote:
> > > There are two busses, one generating c22 transactions and one generating
> > > c45 transactions. Each bus has its own MDC/MDIO pins.
> > 
> > O.K. That is what i wanted to know. So we want two completely separate
> > device tree bindings, busses registered with Linux, etc.
> > 
> > Thanks for clarification.
> 
> So in the end I need one change in v3: to bind the xSMI usage to
> marvell,xmdio and the SMI one to marvell,orion-mdio. (Plus the GENMASK
> and offset comments).

Also, you need to
1. trap out on incorrect MII_ADDR_C45 in regnum for the interface.
2. mask the dev_addr with GENMASK(4, 0) (as merely shifting will leave
   the MII_ADDR_C45 bit set.)
3. moving MVMDIO_XSMI_PHYADDR_SHIFT / MVMDIO_XSMI_DEVADDR_SHIFT /
   MVMDIO_XSMI_READ_OPERATION / MVMDIO_XSMI_WRITE_OPERATION under the
   MVMDIO_XSMI_MGNT_REG reg - these definitions are nothing to do with
   MVMDIO_XSMI_ADDR_REG.
4. fixing MVMDIO_XSMI_WRITE_OPERATION to be 5 << 26, not 5 << 27.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently@9.6Mbps down 400kbps up
according to speedtest.net.