From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Tue, 13 Jun 2017 13:10:39 -0700 Subject: [GIT PULL 2/7] Broadcom devicetree changes for 4.13 (v2) In-Reply-To: <20170613201044.9808-1-f.fainelli@gmail.com> References: <20170613201044.9808-1-f.fainelli@gmail.com> Message-ID: <20170613201044.9808-2-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6: Linux 4.12-rc1 (2017-05-13 13:19:49 -0700) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.13/devicetree for you to fetch changes up to 4a579ecf3d4f964bd6b39605610201cd4d5a7e8e: Merge tag 'bcm2835-dt-next-2017-06-12' into devicetree/next (2017-06-13 12:38:48 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based Device Tree changes for 4.13. Note that Baruch's changes are fixes that are currently included in v4.12-rc2, but they are also included here in order to keep this tag based off v4.12-rc1. Please pull the following: - Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he also adds the MDIO controller nodes for later use by USB PHYs - Eric adds support for the V3D engine and Ethernet switch on the Cygnus platforms, he also adds a set of Device Tree sources and include files for the Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel, - Jon adds CPU and thermal zones to the Northstar Plus Device Tree files - Stefan updates the Raspberry Pi DTS files with thermal trip points and zones, adds support for the USB OTG on the Raspberry Pi Zero which includes the proper dwc2 configuration, a generic USB PHY and finally the enabling of the OTG controller by including the proper DTS include file - Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster than the SDHCI) ---------------------------------------------------------------- Baruch Siach (4): ARM: dts: bcm2835: fix uart0 pinctrl node names ARM: dts: bcm2835: fix i2c0 pins ARM: dts: bcm2835: fix uart0/uart1 pins ARM: dts: bcm2835: add index to the ethernet alias Eric Anholt (3): ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) ARM: dts: Cygnus: Add BCM11360's V3D device ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY Florian Fainelli (2): Merge tag 'bcm2835-dt-next-2017-03-30' into devicetree/next Merge tag 'bcm2835-dt-next-2017-06-12' into devicetree/next Gerd Hoffmann (1): ARM: dts: bcm283x: switch from &sdhci to &sdhost Jon Mason (1): ARM: dts: NSP: Add Thermal Support Rafa? Mi?ecki (2): ARM: dts: BCM5301X: Add CPU thermal sensor and zone ARM: dts: BCM5301X: Specify MDIO bus in the DT Stefan Wahren (4): ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM: dts: bcm283x: Add dtsi for OTG mode ARM: dts: bcm283x: Add generic USB PHY ARM: dts: bcm2835-rpi-zero: Enable OTG mode arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm-cygnus.dtsi | 71 +++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm-nsp.dtsi | 26 +++++++++++ arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +- arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- arch/arm/boot/dts/bcm2835.dtsi | 4 ++ arch/arm/boot/dts/bcm2836.dtsi | 4 ++ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 + arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 10 ++++ arch/arm/boot/dts/bcm283x.dtsi | 49 ++++++++++++++++---- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++ arch/arm/boot/dts/bcm911360_entphn.dts | 20 ++++++++ 14 files changed, 215 insertions(+), 13 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi