From: guodong.xu@linaro.org (Guodong Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/20] arm64: dts: hi3660: add device nodes
Date: Thu, 15 Jun 2017 11:03:57 +0800 [thread overview]
Message-ID: <20170615030417.14059-1-guodong.xu@linaro.org> (raw)
This patchset adds various devices nodes for hi3660 and hikey960.
HiKey960 is one of 96boards. For details information about it, please
refer to [1].
In v4, I removed cpuidle patch
* (v3-0014-arm64-dts-hi3660-enable-idle-states.patch)
, since we are not sure yet whether the corresponding driver can get
into mainline. Sorry about the noise.
* Other patches are not changed.
In v3,
* nothing is changed for patches already exists in v2.
* added 9 more dts patches. Most of them already were reviewed with their
corresponding driver patchset. For purpose of easy integration for
platform maintainer, I copied them here, including threads [2], [3],
and [4].
* four patches, this is the first time they are sent out for review.
v3-0014-arm64-dts-hi3660-enable-idle-states.patch
v3-0019-dt-bindings-mmc-dw_mmc-k3-add-document-of-hi3660-.patch
v3-0020-arm64-dts-hi3660-add-sd-sdio-device-nodes.patch
v3-0021-arm64-dts-hi3660-hikey960-add-nodes-for-WiFi.patch
mmc driver is under review in [5].
In v2, incorporated review comments from Rob Herring <robh@kernel.org>
* uart4: max-speed should be in slave device bluetooth node
* LEDs: - bt_active triggered by 'hci0-power'
- move out of SoC level
* pinctrl: update dts to use #pinctrl-cells
* uart: add pinctrl information into uart nodes; add label strings.
* chosen: update stdout-path. serial6 is used.
* i2c: add label strings. change reg address to lower case.
* remove unnecessary status="ok"
* gpio-keys: move out of SoC level.
[1] https://github.com/96boards/documentation/tree/master/ConsumerEdition/HiKey960
[2] sp804 timer: https://www.spinics.net/lists/kernel/msg2513025.html
[3] PCIe: https://www.spinics.net/lists/kernel/msg2520677.html
[4] mfd and regulator: https://www.spinics.net/lists/arm-kernel/msg586147.html
[5] mmc: https://patchwork.kernel.org/patch/9783273/
Chen Feng (2):
arm64: dts: hi3660: Add uarts nodes
arm64: dts: hi3660: Add pl031 rtc node
Chen Jun (1):
arm64: dts: hi3660: add power key dts node
Guodong Xu (7):
dt-bindings: arm: hisilicon: add bindings for HiKey960 board
arm64: dts: hisilicon: update compatible string for hikey960
arm64: dts: hikey960: add WL1837 Bluetooth device node
arm64: dts: hikey960: add LED nodes
dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
arm64: dts: hi3660-hikey960: add nodes for WiFi
Leo Yan (1):
arm64: dts: hi3660: add sp804 timer node
Li Wei (1):
arm64: dts: hi3660: add sd/sdio device nodes
Wang Xiaoyin (4):
arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
arm64: dts: hi3660: add spi device nodes
arm64: dts: hikey960: add device node for pmic and regulators
Xiaowei Song (2):
dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
arm64: dts: hisi: add kirin pcie node
Zhangfei Gao (2):
arm64: dts: hi3660: add resources for clock and reset
arm64: dts: Add I2C nodes for Hi3660
.../bindings/arm/hisilicon/hisilicon.txt | 4 +
Documentation/devicetree/bindings/mfd/hi6421.txt | 4 +-
.../devicetree/bindings/mmc/k3-dw-mshc.txt | 1 +
.../devicetree/bindings/pci/kirin-pcie.txt | 50 ++
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 217 +++++-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 702 ++++++++++++++++++-
.../arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi | 778 +++++++++++++++++++--
7 files changed, 1681 insertions(+), 75 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
--
2.10.2
next reply other threads:[~2017-06-15 3:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-15 3:03 Guodong Xu [this message]
2017-06-15 3:03 ` [PATCH v4 01/20] dt-bindings: arm: hisilicon: add bindings for HiKey960 board Guodong Xu
2017-06-15 3:03 ` [PATCH v4 02/20] arm64: dts: hisilicon: update compatible string for hikey960 Guodong Xu
2017-06-15 3:04 ` [PATCH v4 03/20] arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig Guodong Xu
2017-06-15 3:04 ` [PATCH v4 04/20] arm64: dts: hi3660: add resources for clock and reset Guodong Xu
2017-06-15 3:04 ` [PATCH v4 05/20] arm64: dts: Add I2C nodes for Hi3660 Guodong Xu
2017-06-15 3:04 ` [PATCH v4 06/20] arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC Guodong Xu
2017-06-15 3:04 ` [PATCH v4 07/20] arm64: dts: hi3660: Add uarts nodes Guodong Xu
2017-06-15 3:04 ` [PATCH v4 08/20] arm64: dts: hikey960: add WL1837 Bluetooth device node Guodong Xu
2017-06-15 3:04 ` [PATCH v4 09/20] arm64: dts: hi3660: Add pl031 rtc node Guodong Xu
2017-06-15 3:04 ` [PATCH v4 10/20] arm64: dts: hi3660: add power key dts node Guodong Xu
2017-06-15 3:04 ` [PATCH v4 11/20] arm64: dts: hikey960: add LED nodes Guodong Xu
2017-06-15 3:04 ` [PATCH v4 12/20] arm64: dts: hi3660: add spi device nodes Guodong Xu
2017-06-15 3:04 ` [PATCH v4 13/20] arm64: dts: hi3660: add sp804 timer node Guodong Xu
2017-06-15 3:04 ` [PATCH v4 14/20] dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs Guodong Xu
2017-06-15 3:04 ` [PATCH v4 15/20] arm64: dts: hisi: add kirin pcie node Guodong Xu
2017-06-16 14:13 ` [PATCH v5 " Guodong Xu
2017-06-16 14:43 ` Wei Xu
2017-06-15 3:04 ` [PATCH v4 16/20] dt-bindings: mfd: hi6421: Add hi6421v530 compatible string Guodong Xu
2017-06-15 3:04 ` [PATCH v4 17/20] arm64: dts: hikey960: add device node for pmic and regulators Guodong Xu
2017-06-15 3:04 ` [PATCH v4 18/20] dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc Guodong Xu
2017-06-15 3:04 ` [PATCH v4 19/20] arm64: dts: hi3660: add sd/sdio device nodes Guodong Xu
2017-06-15 3:04 ` [PATCH v4 20/20] arm64: dts: hi3660-hikey960: add nodes for WiFi Guodong Xu
2017-06-15 19:49 ` [PATCH v4 00/20] arm64: dts: hi3660: add device nodes Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170615030417.14059-1-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).