From mboxrd@z Thu Jan 1 00:00:00 1970 From: guodong.xu@linaro.org (Guodong Xu) Date: Thu, 15 Jun 2017 11:04:08 +0800 Subject: [PATCH v4 11/20] arm64: dts: hikey960: add LED nodes In-Reply-To: <20170615030417.14059-1-guodong.xu@linaro.org> References: <20170615030417.14059-1-guodong.xu@linaro.org> Message-ID: <20170615030417.14059-12-guodong.xu@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT respectively. All of them are implemented as GPIO. Signed-off-by: Guodong Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 48 +++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 7aac35b..9ecf6c6 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -49,6 +49,54 @@ linux,code = ; }; }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "user_led1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "user_led2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "user_led3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + default-state = "off"; + }; + + user_led4 { + label = "user_led4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; }; &i2c0 { -- 2.10.2