* [GIT PULL 2/5] i.MX SoC updates for 4.13
2017-06-18 15:55 [GIT PULL 1/5] i.MX driver changes for 4.13 Shawn Guo
@ 2017-06-18 15:55 ` Shawn Guo
2017-06-19 6:06 ` Olof Johansson
2017-06-18 15:55 ` [GIT PULL 3/5] i.MX device tree " Shawn Guo
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2017-06-18 15:55 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.13
for you to fetch changes up to bf5a01d7c50fb0c4e1c3d320d670bad252d50bcb:
ARM: imx6ull: Make suspend/resume work like on 6ul (2017-06-07 11:38:40 +0800)
----------------------------------------------------------------
The i.MX SoC updates for 4.13:
- Select GPCv2 for i.MX7 SoCs to get imx-gpcv2 irqchip driver built
for i.MX7 platforms by default.
- A couple of patches from Leonard to add IMX6ULL cpu check and get
suspend/resume work on IMX6ULL.
----------------------------------------------------------------
Andrey Smirnov (1):
ARM: imx: Select GPCv2 for i.MX7
Leonard Crestez (2):
ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull
ARM: imx6ull: Make suspend/resume work like on 6ul
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/cpu.c | 3 +++
arch/arm/mach-imx/mxc.h | 6 ++++++
arch/arm/mach-imx/pm-imx6.c | 6 ++++--
4 files changed, 14 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL 2/5] i.MX SoC updates for 4.13
2017-06-18 15:55 ` [GIT PULL 2/5] i.MX SoC updates " Shawn Guo
@ 2017-06-19 6:06 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2017-06-19 6:06 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jun 18, 2017 at 11:55:20PM +0800, Shawn Guo wrote:
> The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
>
> Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-4.13
>
> for you to fetch changes up to bf5a01d7c50fb0c4e1c3d320d670bad252d50bcb:
>
> ARM: imx6ull: Make suspend/resume work like on 6ul (2017-06-07 11:38:40 +0800)
>
> ----------------------------------------------------------------
> The i.MX SoC updates for 4.13:
> - Select GPCv2 for i.MX7 SoCs to get imx-gpcv2 irqchip driver built
> for i.MX7 platforms by default.
> - A couple of patches from Leonard to add IMX6ULL cpu check and get
> suspend/resume work on IMX6ULL.
Merged, thanks.
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 3/5] i.MX device tree updates for 4.13
2017-06-18 15:55 [GIT PULL 1/5] i.MX driver changes for 4.13 Shawn Guo
2017-06-18 15:55 ` [GIT PULL 2/5] i.MX SoC updates " Shawn Guo
@ 2017-06-18 15:55 ` Shawn Guo
2017-06-19 6:07 ` Olof Johansson
2017-06-18 15:55 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2017-06-18 15:55 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.13
for you to fetch changes up to d8710c3fb912574709166bba24f4c64162ab832c:
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes (2017-06-17 21:17:04 +0800)
----------------------------------------------------------------
The i.MX device tree updates for 4.13:
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
Board.
- A series from Alexandre Belloni to correct the vendor prefix for
rv4162 compatible.
- A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
imx7d-sdb board.
- Increase the SGTL5000 LRCLK pad strength to fix a random audio
channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
boards.
- Clean up non-existing property 'enable-active-low' from fixed
regulator device nodes.
- Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
though device drivers do not use the polarity for now.
- Add Wifi and Bluetooth support for imx7d-sdb board.
- Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
- Update zii-rdu2 device tree source to use #include "..." for local
inclusion.
- A series from Philipp Zabel and Steve Longerbeam to enable video
capture support for imx6qdl platforms.
- A number of small random updates on various board support.
----------------------------------------------------------------
Alexandre Belloni (3):
ARM: dts: imx6qdl-nitrogen6_max: fix rv4162 compatible
ARM: dts: imx6qdl-nitrogen6_som2: fix rv4162 compatible
ARM: dts: imx7d-nitrogen7: fix rv4162 compatible
Andrew Lunn (1):
ARM: dts: vf610-zii: Add switch eeprom-length properties
Andrey Smirnov (6):
ARM: dts: imx: Reintroduce 'anatop-enable-bit' where appropriate
ARM: dts: imx7s: Add node for GPC
ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant
ARM: dts: imx7d-sdb: Add GPIO expander node
ARM: dts: imx7d: Add node for PCIe controller
ARM: dts: imx7d-sdb: Enable PCIe peripheral
Christopher Spinrath (1):
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
Fabio Estevam (15):
ARM: dts: imx6qdl-wandboard: Fix audio channel swap
ARM: dts: imx6qdl-colibri: Fix audio channel swap
ARM: dts: imx6sx-sdb: Properly model the ARM and SOC regulator supplies
ARM: dts: imx7s-warp: Pass 'no-1-8-v' property to the eMMC
ARM: dts: imx6: Fix BCM43xx node name
ARM: dts: imx7d-pico: Add watchdog support
ARM: dts: imx7d-pico: Pass 'no-1-8-v' property to the eMMC
ARM: dts: imx23-sansa: Remove 'enable-active-low' property
ARM: dts: tx6: Remove 'enable-active-low' property
ARM: dts: imx7: Fix typo in watchdog pin name
ARM: dts: imx: Fix Ethernet PHY reset polarity
ARM: dts: imx7d-sdb: Adjust the regulator nodes
ARM: dts: imx7d-sdb: Add Wifi support
ARM: dts: imx7d-sdb: Add Bluetooth support
ARM: dts: imx6: Fix PCI GPIO reset polarity
Javier Martinez Canillas (1):
ARM: dts: imx: Add generic compatible string for I2C EEPROM
Lucas Stach (2):
ARM: dts: imx6: adopt DT to new GPC binding
ARM: dts: imx6qp: add specific compatible for GPC
Masahiro Yamada (1):
ARM: dts: imx6: use #include "..." to include local DT
Philipp Zabel (2):
ARM: dts: imx6qdl: add multiplexer controls
ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
Stefan Agner (2):
ARM: dts: imx7: add USDHC NAND and IPG clock to SDHC instances
ARM: dts: imx7: use 3 PWM cells
Steve Longerbeam (9):
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add capture-subsystem device
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
Tim Harvey (2):
ARM: dts: imx: ventana: fix DTC warnings
ARM: dts: imx: add Gateworks Ventana GW5600 support
Vanessa Maegima (1):
ARM: dts: imx7d-pico: Add initial support
Yuantian Tang (1):
ARM: dts: ls1021a: update the clockgen node
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx23-sansa.dts | 7 +-
arch/arm/boot/dts/imx25-karo-tx25.dts | 2 +-
arch/arm/boot/dts/imx25-pdk.dts | 2 +-
arch/arm/boot/dts/imx25.dtsi | 1 +
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi | 2 +-
arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 2 +-
arch/arm/boot/dts/imx28-cfa10037.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10049.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10057.dts | 2 +-
arch/arm/boot/dts/imx28-cfa10058.dts | 2 +-
arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts | 2 +-
arch/arm/boot/dts/imx28-evk.dts | 4 +-
arch/arm/boot/dts/imx28-m28cu3.dts | 2 +-
arch/arm/boot/dts/imx50-evk.dts | 2 +-
arch/arm/boot/dts/imx50.dtsi | 1 +
arch/arm/boot/dts/imx51-apf51.dts | 2 +-
arch/arm/boot/dts/imx53-mba53.dts | 2 +-
arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
arch/arm/boot/dts/imx53-smd.dts | 2 +-
arch/arm/boot/dts/imx53-tqma53.dtsi | 2 +-
arch/arm/boot/dts/imx53-tx53.dtsi | 2 +-
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 2 +-
arch/arm/boot/dts/imx6dl-gw560x.dts | 55 ++
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +-
arch/arm/boot/dts/imx6dl-sabrelite.dts | 5 +
arch/arm/boot/dts/imx6dl-sabresd.dts | 5 +
arch/arm/boot/dts/imx6dl.dtsi | 189 ++++++
arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +-
arch/arm/boot/dts/imx6q-cm-fx6.dts | 43 +-
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 4 +-
arch/arm/boot/dts/imx6q-evi.dts | 2 +-
arch/arm/boot/dts/imx6q-gw5400-a.dts | 7 +-
arch/arm/boot/dts/imx6q-gw560x.dts | 59 ++
arch/arm/boot/dts/imx6q-novena.dts | 4 +-
arch/arm/boot/dts/imx6q-sabrelite.dts | 5 +
arch/arm/boot/dts/imx6q-sabresd.dts | 5 +
arch/arm/boot/dts/imx6q-utilite-pro.dts | 2 +-
arch/arm/boot/dts/imx6q-zii-rdu2.dts | 4 +-
arch/arm/boot/dts/imx6q.dtsi | 127 +++-
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 4 +-
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 -
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 -
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 749 ++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 131 +++-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 152 ++++-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 116 +++-
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 5 +-
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 3 +-
arch/arm/boot/dts/imx6qdl.dtsi | 60 +-
arch/arm/boot/dts/imx6qp-zii-rdu2.dts | 4 +-
arch/arm/boot/dts/imx6qp.dtsi | 4 +
arch/arm/boot/dts/imx6sl.dtsi | 3 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 4 +-
arch/arm/boot/dts/imx6sx-sdb.dts | 8 +
arch/arm/boot/dts/imx6sx.dtsi | 3 +
arch/arm/boot/dts/imx6ul-opos6ul.dtsi | 2 +-
arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts | 2 +-
arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 7 +-
arch/arm/boot/dts/imx6ul.dtsi | 1 +
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 6 +-
arch/arm/boot/dts/imx7d-pico.dts | 403 ++++++++++++
arch/arm/boot/dts/imx7d-pinfunc.h | 6 +-
arch/arm/boot/dts/imx7d-sdb.dts | 133 +++-
arch/arm/boot/dts/imx7d.dtsi | 37 ++
arch/arm/boot/dts/imx7s-warp.dts | 3 +-
arch/arm/boot/dts/imx7s.dtsi | 50 +-
arch/arm/boot/dts/ls1021a.dtsi | 90 +--
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 +
78 files changed, 2361 insertions(+), 226 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-gw560x.dts
create mode 100644 arch/arm/boot/dts/imx6q-gw560x.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-gw560x.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-pico.dts
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL 3/5] i.MX device tree updates for 4.13
2017-06-18 15:55 ` [GIT PULL 3/5] i.MX device tree " Shawn Guo
@ 2017-06-19 6:07 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2017-06-19 6:07 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jun 18, 2017 at 11:55:21PM +0800, Shawn Guo wrote:
> The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
>
> Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-4.13
>
> for you to fetch changes up to d8710c3fb912574709166bba24f4c64162ab832c:
>
> ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes (2017-06-17 21:17:04 +0800)
>
> ----------------------------------------------------------------
> The i.MX device tree updates for 4.13:
> - New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
> Board.
> - A series from Alexandre Belloni to correct the vendor prefix for
> rv4162 compatible.
> - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
> imx7d-sdb board.
> - Increase the SGTL5000 LRCLK pad strength to fix a random audio
> channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
> boards.
> - Clean up non-existing property 'enable-active-low' from fixed
> regulator device nodes.
> - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
> though device drivers do not use the polarity for now.
> - Add Wifi and Bluetooth support for imx7d-sdb board.
> - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
> - Update zii-rdu2 device tree source to use #include "..." for local
> inclusion.
> - A series from Philipp Zabel and Steve Longerbeam to enable video
> capture support for imx6qdl platforms.
> - A number of small random updates on various board support.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 4/5] Freescale arm64 device tree updates for 4.13
2017-06-18 15:55 [GIT PULL 1/5] i.MX driver changes for 4.13 Shawn Guo
2017-06-18 15:55 ` [GIT PULL 2/5] i.MX SoC updates " Shawn Guo
2017-06-18 15:55 ` [GIT PULL 3/5] i.MX device tree " Shawn Guo
@ 2017-06-18 15:55 ` Shawn Guo
2017-06-19 6:09 ` Olof Johansson
2017-06-18 15:55 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
2017-06-19 6:05 ` [GIT PULL 1/5] i.MX driver changes " Olof Johansson
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2017-06-18 15:55 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.13
for you to fetch changes up to 375b6755a5b1836699d00c47f689d63bd1e40b95:
arm64: dts: ls1088a: update sata node (2017-06-14 22:42:42 +0800)
----------------------------------------------------------------
The Freescale arm64 device tree updates for 4.13:
- A series from NXP employee Li Yang that updates the copyright claims
to comply with company policy.
- A patch-set from Madalin Bucur that adds Data Path Acceleration
Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
created for SoCs with different DPAA configuration to include the
devices as needed.
- Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
boards.
- Enable TMU device for thermal management support on LS1088A.
- Update SATA device node for LS1088A with correct compatible and ECC
register bit.
- A few small random device tree updates.
----------------------------------------------------------------
Javier Martinez Canillas (1):
arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM
Li Yang (1):
arm64: dts: freescale: update the copyright claims
Madalin Bucur (6):
arm64: dts: add DPAA QBMan portals
arm64: dts: add LS1043A DPAA QBMan nodes
arm64: dts: add LS1046A DPAA QBMan nodes
arm64: dts: add DPAA FMan nodes
arm64: dts: add LS1043A DPAA FMan support
arm64: dts: add LS1046A DPAA FMan nodes
Prabhakar Kushwaha (2):
arm64: dts: Define big endian of IFC for LS1043a/LS1046a
arm64: dts: Add flash node for ls1088a qds and rdb
Ran Wang (1):
arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
Scott Wood (1):
arm64: dts: ls1012a: Add coreclk
Yangbo Lu (5):
mmc: dt: add compatible into eSDHC required properties
arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
arm64: dts: ls1012a: add eSDHC nodes
arm64: dts: ls1088a: add esdhc node
Yuantian Tang (4):
arm64: dts: ls1088a: update the sata node
arm64: dts: ls1088a: Add TMU device tree support
dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list
arm64: dts: ls1088a: update sata node
yinbo.zhu (1):
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
.../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +-
.../devicetree/bindings/mmc/fsl-esdhc.txt | 14 +++
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 10 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 15 ++-
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 39 +++++++-
arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi | 45 +++++++++
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 79 ++++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 69 ++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi | 48 +++++++++
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 70 ++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 75 +++++++++++++-
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 28 ++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 20 ++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 111 +++++++++++++++++++--
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 3 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 5 +-
.../boot/dts/freescale/qoriq-bman-portals.dtsi | 71 +++++++++++++
.../boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi | 42 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi | 42 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi | 41 ++++++++
.../boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi | 41 ++++++++
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi | 81 +++++++++++++++
.../boot/dts/freescale/qoriq-qman-portals.dtsi | 80 +++++++++++++++
38 files changed, 1192 insertions(+), 36 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL 4/5] Freescale arm64 device tree updates for 4.13
2017-06-18 15:55 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
@ 2017-06-19 6:09 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2017-06-19 6:09 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jun 18, 2017 at 11:55:22PM +0800, Shawn Guo wrote:
> The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
>
> Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-4.13
>
> for you to fetch changes up to 375b6755a5b1836699d00c47f689d63bd1e40b95:
>
> arm64: dts: ls1088a: update sata node (2017-06-14 22:42:42 +0800)
>
> ----------------------------------------------------------------
> The Freescale arm64 device tree updates for 4.13:
> - A series from NXP employee Li Yang that updates the copyright claims
> to comply with company policy.
> - A patch-set from Madalin Bucur that adds Data Path Acceleration
> Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
> created for SoCs with different DPAA configuration to include the
> devices as needed.
> - Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
> boards.
> - Enable TMU device for thermal management support on LS1088A.
> - Update SATA device node for LS1088A with correct compatible and ECC
> register bit.
> - A few small random device tree updates.
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 5/5] i.MX defconfig updates for 4.13
2017-06-18 15:55 [GIT PULL 1/5] i.MX driver changes for 4.13 Shawn Guo
` (2 preceding siblings ...)
2017-06-18 15:55 ` [GIT PULL 4/5] Freescale arm64 " Shawn Guo
@ 2017-06-18 15:55 ` Shawn Guo
2017-06-19 6:10 ` Olof Johansson
2017-06-19 6:05 ` [GIT PULL 1/5] i.MX driver changes " Olof Johansson
4 siblings, 1 reply; 10+ messages in thread
From: Shawn Guo @ 2017-06-18 15:55 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.13
for you to fetch changes up to 6db53373884327f0457d90aa665d249a11461b07:
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC (2017-06-18 07:32:01 +0800)
----------------------------------------------------------------
The i.MX defconfig updates for 4.13:
- Enable i.MX7 ADC driver support.
- Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
trip points for testing.
- CONFIG_DEBUG_FS gets lost by accident because of a change around
CONFIG_RCU_TRACE. Re-enable it explicitly.
- Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
- Enable more common cpufreq governors to help test cpufreq driver.
----------------------------------------------------------------
Fabio Estevam (1):
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
Leonard Crestez (3):
ARM: imx_v6_v7_defconfig: Enable cpufreq governors
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
Stefan Wahren (2):
ARM: mxs_defconfig: Enable CONFIG_CGROUPS
ARM: mxs_defconfig: Re-enable MXS LRADC
arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++
arch/arm/configs/mxs_defconfig | 6 ++++--
2 files changed, 10 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread* [GIT PULL 5/5] i.MX defconfig updates for 4.13
2017-06-18 15:55 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
@ 2017-06-19 6:10 ` Olof Johansson
0 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2017-06-19 6:10 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jun 18, 2017 at 11:55:23PM +0800, Shawn Guo wrote:
> The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
>
> Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-4.13
>
> for you to fetch changes up to 6db53373884327f0457d90aa665d249a11461b07:
>
> ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC (2017-06-18 07:32:01 +0800)
>
> ----------------------------------------------------------------
> The i.MX defconfig updates for 4.13:
> - Enable i.MX7 ADC driver support.
> - Enable THERMAL_WRITABLE_TRIPS, so that i.MX thermal driver can set
> trip points for testing.
> - CONFIG_DEBUG_FS gets lost by accident because of a change around
> CONFIG_RCU_TRACE. Re-enable it explicitly.
> - Enable MXS LRADC driver and CONFIG_CGROUPS for mxs_defconfig.
> - Enable more common cpufreq governors to help test cpufreq driver.
>
> ----------------------------------------------------------------
> Fabio Estevam (1):
> ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
>
> Leonard Crestez (3):
> ARM: imx_v6_v7_defconfig: Enable cpufreq governors
> ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
> ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
>
> Stefan Wahren (2):
> ARM: mxs_defconfig: Enable CONFIG_CGROUPS
> ARM: mxs_defconfig: Re-enable MXS LRADC
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread
* [GIT PULL 1/5] i.MX driver changes for 4.13
2017-06-18 15:55 [GIT PULL 1/5] i.MX driver changes for 4.13 Shawn Guo
` (3 preceding siblings ...)
2017-06-18 15:55 ` [GIT PULL 5/5] i.MX defconfig " Shawn Guo
@ 2017-06-19 6:05 ` Olof Johansson
4 siblings, 0 replies; 10+ messages in thread
From: Olof Johansson @ 2017-06-19 6:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Jun 18, 2017 at 11:55:19PM +0800, Shawn Guo wrote:
> The following changes since commit 2ea659a9ef488125eb46da6eb571de5eae5c43f6:
>
> Linux 4.12-rc1 (2017-05-13 13:19:49 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-4.13
>
> for you to fetch changes up to c465a32fdde67c029ba8880f2878491042b72524:
>
> soc: imx: gpc: build gpc only if hardware has gpc (2017-05-15 10:22:25 +0800)
>
> ----------------------------------------------------------------
> The i.MX drivers update for 4.13:
> - Add CONFIG_HAVE_IMX_GPC to control the build of GPC driver, so that
> it doesn't build for platforms that do not have it.
Merged, thanks.
-Olof
^ permalink raw reply [flat|nested] 10+ messages in thread