linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jic23@kernel.org (Jonathan Cameron)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] iio: adc: mt7622: add support for suspend/resume.
Date: Sat, 24 Jun 2017 21:00:43 +0100	[thread overview]
Message-ID: <20170624210043.29569f3a@kernel.org> (raw)
In-Reply-To: <1498110274-18678-3-git-send-email-zhiyong.tao@mediatek.com>

On Thu, 22 Jun 2017 13:44:33 +0800
Zhiyong Tao <zhiyong.tao@mediatek.com> wrote:

> This patch supports auxadc suspend/resume flow.
> Disable auxadc clk and power in suspend function.
> Enable axuadc clk and power in resume function.
> 
> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Worth handling the cases where power management is not configured into the
kernel properly.

So a few minor suggestions.  Otherwise looks good to me.
> ---
>  drivers/iio/adc/mt6577_auxadc.c |   37 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
> index 2d104c8..2dd7c74 100644
> --- a/drivers/iio/adc/mt6577_auxadc.c
> +++ b/drivers/iio/adc/mt6577_auxadc.c
> @@ -184,6 +184,37 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
>  	.read_raw = &mt6577_auxadc_read_raw,
>  };
>  
> +static int mt6577_auxadc_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(adc_dev->adc_clk);
> +	if (ret) {
> +		pr_err("failed to enable auxadc clock\n");
> +		return ret;
> +	}
> +
> +	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
> +			      MT6577_AUXADC_PDN_EN, 0);
> +	mdelay(MT6577_AUXADC_POWER_READY_MS);
> +
> +	return 0;
> +}
> +
> +static int mt6577_auxadc_suspend(struct device *dev)
Mark these __maybe_unused for the CONFIG_PM but not CONFIG_PM_SLEEP case.
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
> +
> +	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
> +			      0, MT6577_AUXADC_PDN_EN);
> +	clk_disable_unprepare(adc_dev->adc_clk);
> +
> +	return 0;
> +}
> +
>  static int mt6577_auxadc_probe(struct platform_device *pdev)
>  {
>  	struct mt6577_auxadc_device *adc_dev;
> @@ -269,6 +300,11 @@ static int mt6577_auxadc_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct dev_pm_ops mt6577_auxadc_pm_ops = {
> +	.suspend = mt6577_auxadc_suspend,
> +	.resume = mt6577_auxadc_resume,
> +};
> +
Use the SIMPLE_SYSTEM_PM_OPS macro to make these assignments magically go away
if PM_CONFIG_SLEEP is not defined.
>  static const struct of_device_id mt6577_auxadc_of_match[] = {
>  	{ .compatible = "mediatek,mt2701-auxadc", },
>  	{ .compatible = "mediatek,mt8173-auxadc", },
> @@ -280,6 +316,7 @@ static int mt6577_auxadc_remove(struct platform_device *pdev)
>  	.driver = {
>  		.name   = "mt6577-auxadc",
>  		.of_match_table = mt6577_auxadc_of_match,
> +		.pm = &mt6577_auxadc_pm_ops,
>  	},
>  	.probe	= mt6577_auxadc_probe,
>  	.remove	= mt6577_auxadc_remove,

  reply	other threads:[~2017-06-24 20:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-22  5:44 [PATCH 0/3] ADC: Mediatek auxadc driver for mt7622 Zhiyong Tao
2017-06-22  5:44 ` [PATCH 1/3] dt-bindings: adc: mt7622: add binding document Zhiyong Tao
2017-06-24 20:02   ` Jonathan Cameron
2017-06-26 10:45     ` Zhiyong Tao
2017-06-22  5:44 ` [PATCH 2/3] iio: adc: mt7622: add support for suspend/resume Zhiyong Tao
2017-06-24 20:00   ` Jonathan Cameron [this message]
2017-06-26  2:54     ` zhiyong tao
2017-06-26  5:01       ` Jonathan Cameron
2017-06-22  5:44 ` [PATCH 3/3] iio: adc: mt7622: Add compatible node for mt7622 Zhiyong Tao
2017-06-24 20:02   ` Jonathan Cameron
2017-06-26  1:55     ` zhiyong tao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170624210043.29569f3a@kernel.org \
    --to=jic23@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).