linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: plaes@plaes.org (Priit Laes)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider
Date: Wed, 28 Jun 2017 17:59:49 +0000	[thread overview]
Message-ID: <20170628175949.GA3706@plaes.org> (raw)
In-Reply-To: <20170627094607.2hkgzkycclboemvu@flea.lan>

On Tue, Jun 27, 2017 at 11:46:07AM +0200, Maxime Ripard wrote:
> Hi!
> 
> On Sun, Jun 25, 2017 at 11:45:42PM +0300, Priit Laes wrote:
> > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
> > 6 is fixed post-divider.
> > 
> > Signed-off-by: Priit Laes <plaes@plaes.org>
> > ---
> >  drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++--
> >  drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
> >  2 files changed, 12 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
> > index c0e5c10..de30e15 100644
> > --- a/drivers/clk/sunxi-ng/ccu_div.c
> > +++ b/drivers/clk/sunxi-ng/ccu_div.c
> > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
> >  	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
> >  						  parent_rate);
> >  
> > -	return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
> > -				   cd->div.flags);
> > +	val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
> > +				  cd->div.flags);
> > +
> > +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> > +		val /= cd->fixed_post_div;
> > +
> > +	return val;
> >  }
> >  
> >  static int ccu_div_determine_rate(struct clk_hw *hw,
> > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
> >  	val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
> >  			      cd->div.flags);
> >  
> > +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> > +		val *= cd->fixed_post_div;
> > +
> >  	spin_lock_irqsave(cd->common.lock, flags);
> >  
> >  	reg = readl(cd->common.base + cd->common.reg);
> 
> You also need to adjust the round rate call back to take into account
> the post divider before calling divider_round_rate_parent, and after
> since that function can modify the parent_rate.

Is there a way to trigger this function? I don't see it getting called.

> > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
> > index 08d0744..f3a5028 100644
> > --- a/drivers/clk/sunxi-ng/ccu_div.h
> > +++ b/drivers/clk/sunxi-ng/ccu_div.h
> > @@ -86,9 +86,10 @@ struct ccu_div_internal {
> >  struct ccu_div {
> >  	u32			enable;
> >  
> > -	struct ccu_div_internal		div;
> > +	struct ccu_div_internal	div;
> 
> Spurious change?

Nope, it was not indented the same way as other variables.
Should I send it as separate patch?

> 
> Thanks!
> Maxime
> 
> -- 
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

  reply	other threads:[~2017-06-28 17:59 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-25 20:45 [PATCH v4 0/6] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU Priit Laes
2017-06-25 20:45 ` [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Priit Laes
2017-06-25 22:05   ` [linux-sunxi] " Jonathan Liu
2017-06-26  5:53     ` Priit Laes
2017-06-26 10:15       ` Jonathan Liu
2017-06-27  9:46   ` Maxime Ripard
2017-06-28 17:59     ` Priit Laes [this message]
2017-06-29  7:33       ` Maxime Ripard
2017-06-25 20:45 ` [PATCH v4 2/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver Priit Laes
2017-06-25 20:45 ` [PATCH v4 3/6] dt-bindings: List devicetree binding for the CCU of Allwinner A20 Priit Laes
2017-06-25 20:45 ` [PATCH v4 4/6] dt-bindings: List devicetree binding for the CCU of Allwinner A10 Priit Laes
2017-06-25 20:45 ` [PATCH v4 5/6] ARM: sun7i: Convert to CCU Priit Laes
2017-06-29 10:57   ` [linux-sunxi] " Andre Przywara
2017-06-29 11:28     ` Emmanuel Vadot
2017-06-29 11:53       ` Maxime Ripard
2017-06-29 11:49     ` Maxime Ripard
2017-06-30 13:12       ` Andre Przywara
2017-06-25 20:45 ` [PATCH v4 6/6] ARM: sun4i: " Priit Laes
2017-06-30  9:52   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170628175949.GA3706@plaes.org \
    --to=plaes@plaes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).