From: jlu@pengutronix.de (Jan Luebbe)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] EDAC drivers for Armada XP L2 and DDR
Date: Fri, 30 Jun 2017 16:50:58 +0200 [thread overview]
Message-ID: <20170630145106.29820-1-jlu@pengutronix.de> (raw)
This series adds drivers for the L2 cache and DDR RAM ECC functionality as
found on the MV78230/MV78x60 SoCs. I've tested these changes with the MV78460
(on a custom board with a DDR3 ECC DIMM).
Also contained in this series are an additional debugfs wrapper and devm_
helpers for edac_mc_/edac_device_ allocation and registration, which make error
handing and cleanup simpler.
Compared to the previous RFC series, the following changes have been made:
- Integrated Chris' patches for parity and ECC configuration via DT
- Merged the DDR RAM and L2 cache drivers (as requested by Borislav, analogous
to fsl_ddr_edac.c and mpc85xx_edac.c)
- Added myself to MAINTAINERS (requested by Borislav)
- L2 cache: Track the msg size and use snprintf (review comment by Chris)
- L2 cache: Split error injection from the check function (review comment by
Chris)
- DDR RAM: Allow 16 bit width in addition to 32 and 64 bit (review comment by
Chris)
- Use of_match_ptr() (review comments by Chris)
- Minor checkpatch cleanups
Chris: To actually make use of this with 16 bit width, you'd need to add a new
DT compatible, which could be done in a follow up patch. Is your SoC considered
a armada-xp variant?
Chris Packham (2):
ARM: l2x0: support parity-enable/disable on aurora
ARM: l2x0: add arm,ecc-enable property for aurora
Jan Luebbe (6):
ARM: l2c: move cache-aurora-l2.h to asm/hardware
ARM: aurora-l2: add prefix to MAX_RANGE_SIZE
EDAC: Add missing debugfs_create_x32 wrapper
EDAC: Add devres helpers for
edac_mc_alloc/edac_mc_add_mc(_with_groups)
EDAC: Add devres helpers for
edac_device_alloc_ctl_info/edac_device_add_device
EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC
Documentation/devicetree/bindings/arm/l2c2x0.txt | 2 +
MAINTAINERS | 6 +
arch/arm/include/asm/hardware/cache-aurora-l2.h | 103 ++++
arch/arm/mm/cache-aurora-l2.h | 55 --
arch/arm/mm/cache-l2x0.c | 20 +-
drivers/edac/Kconfig | 7 +
drivers/edac/Makefile | 1 +
drivers/edac/armada_xp_edac.c | 639 +++++++++++++++++++++++
drivers/edac/debugfs.c | 11 +
drivers/edac/edac_device.c | 59 +++
drivers/edac/edac_device.h | 29 +
drivers/edac/edac_mc.c | 53 ++
drivers/edac/edac_mc.h | 26 +
drivers/edac/edac_module.h | 5 +
14 files changed, 958 insertions(+), 58 deletions(-)
create mode 100644 arch/arm/include/asm/hardware/cache-aurora-l2.h
delete mode 100644 arch/arm/mm/cache-aurora-l2.h
create mode 100644 drivers/edac/armada_xp_edac.c
--
2.11.0
next reply other threads:[~2017-06-30 14:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-30 14:50 Jan Luebbe [this message]
2017-06-30 14:50 ` [PATCH 1/8] ARM: l2c: move cache-aurora-l2.h to asm/hardware Jan Luebbe
2017-07-03 12:50 ` Gregory CLEMENT
2017-06-30 14:51 ` [PATCH 2/8] ARM: aurora-l2: add prefix to MAX_RANGE_SIZE Jan Luebbe
2017-07-03 12:51 ` Gregory CLEMENT
2017-06-30 14:51 ` [PATCH 3/8] ARM: l2x0: support parity-enable/disable on aurora Jan Luebbe
2017-06-30 15:00 ` Russell King - ARM Linux
2017-06-30 14:51 ` [PATCH 4/8] ARM: l2x0: add arm,ecc-enable property for aurora Jan Luebbe
2017-06-30 15:00 ` Russell King - ARM Linux
2017-07-02 22:02 ` Chris Packham
2017-07-17 10:11 ` Jan Lübbe
2017-07-03 13:01 ` Gregory CLEMENT
2017-06-30 14:51 ` [PATCH 5/8] EDAC: Add missing debugfs_create_x32 wrapper Jan Luebbe
2017-06-30 14:51 ` [PATCH 6/8] EDAC: Add devres helpers for edac_mc_alloc/edac_mc_add_mc(_with_groups) Jan Luebbe
2017-06-30 14:51 ` [PATCH 7/8] EDAC: Add devres helpers for edac_device_alloc_ctl_info/edac_device_add_device Jan Luebbe
2017-06-30 14:51 ` [PATCH 8/8] EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC Jan Luebbe
2017-07-03 13:03 ` Gregory CLEMENT
2017-07-02 21:59 ` [PATCH 0/8] EDAC drivers for Armada XP L2 and DDR Chris Packham
2017-07-17 10:18 ` Jan Lübbe
2017-07-17 10:22 ` Borislav Petkov
2017-07-17 10:51 ` Jan Lübbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170630145106.29820-1-jlu@pengutronix.de \
--to=jlu@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).