From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@armlinux.org.uk (Russell King - ARM Linux) Date: Sat, 1 Jul 2017 15:06:34 +0100 Subject: ARM: sunxi: "Unbalanced enable for IRQ 0" warning on A20 In-Reply-To: References: Message-ID: <20170701140634.GC4902@n2100.armlinux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Jul 01, 2017 at 12:51:57PM +0200, Andreas F?rber wrote: > [ 33.683928] thermal thermal_zone0: failed to read out thermal zone (-110) > [ 33.690870] ------------[ cut here ]------------ > [ 33.690901] WARNING: CPU: 0 PID: 161 at ../kernel/irq/manage.c:529 > __enable_irq+0x54/0x88 > [ 33.690905] Unbalanced enable for IRQ 0 Why do we have new platforms using IRQ number 0 ? 0 for modern platforms is supposed to mean "no IRQ". -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.