From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] Broadcom STB S2/S3/S5 support for ARM and MIPS
Date: Thu, 6 Jul 2017 15:22:21 -0700 [thread overview]
Message-ID: <20170706222225.9758-1-f.fainelli@gmail.com> (raw)
Hi,
This patch series adds support for S2/S3/S5 suspend/resume states on
ARM and MIPS based Broadcom STB SoCs.
This was submitted a long time ago by Brian, and I am now picking this
up and trying to get this included with support for our latest chips.
Provided that I can collect the necessary Acks from Rob (DT) and other
people (Rafael?) I would probably take this via the Broadcom ARM SoC
pull requests.
Thank you!
Changes in v3:
- make SRAM mapping uncached
- make SWAP_STACK + brcmstb_pm_s3_finish a single asm volatile statement
- added Rob's Acked-by to first patch
Changes in v2:
- clarify the first patch's subject (Rob)
- removed patch #2 which was creating a bisectability problem (kbuild)
- added proper AFLAGS to get s2-arm.S to build properly (kbuild)
- improved MIPS power management binding document (Rob)
Brian Norris (1):
soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)
Florian Fainelli (2):
dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management
binding
dt-bindings: Document MIPS Broadcom STB power management nodes
Justin Chen (1):
soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)
.../devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 6 +-
.../devicetree/bindings/mips/brcm/soc.txt | 153 ++++
drivers/soc/bcm/Kconfig | 2 +
drivers/soc/bcm/brcmstb/Kconfig | 9 +
drivers/soc/bcm/brcmstb/Makefile | 1 +
drivers/soc/bcm/brcmstb/pm/Makefile | 3 +
drivers/soc/bcm/brcmstb/pm/aon_defs.h | 113 +++
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 836 +++++++++++++++++++++
drivers/soc/bcm/brcmstb/pm/pm-mips.c | 461 ++++++++++++
drivers/soc/bcm/brcmstb/pm/pm.h | 89 +++
drivers/soc/bcm/brcmstb/pm/s2-arm.S | 76 ++
drivers/soc/bcm/brcmstb/pm/s2-mips.S | 200 +++++
drivers/soc/bcm/brcmstb/pm/s3-mips.S | 146 ++++
13 files changed, 2094 insertions(+), 1 deletion(-)
create mode 100644 drivers/soc/bcm/brcmstb/Kconfig
create mode 100644 drivers/soc/bcm/brcmstb/pm/Makefile
create mode 100644 drivers/soc/bcm/brcmstb/pm/aon_defs.h
create mode 100644 drivers/soc/bcm/brcmstb/pm/pm-arm.c
create mode 100644 drivers/soc/bcm/brcmstb/pm/pm-mips.c
create mode 100644 drivers/soc/bcm/brcmstb/pm/pm.h
create mode 100644 drivers/soc/bcm/brcmstb/pm/s2-arm.S
create mode 100644 drivers/soc/bcm/brcmstb/pm/s2-mips.S
create mode 100644 drivers/soc/bcm/brcmstb/pm/s3-mips.S
--
2.9.3
next reply other threads:[~2017-07-06 22:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 22:22 Florian Fainelli [this message]
2017-07-06 22:22 ` [PATCH v3 1/4] dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management binding Florian Fainelli
2017-07-06 22:22 ` [PATCH v3 2/4] soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM) Florian Fainelli
2017-07-06 22:22 ` [PATCH v3 3/4] dt-bindings: Document MIPS Broadcom STB power management nodes Florian Fainelli
2017-07-10 14:13 ` Rob Herring
2017-07-06 22:22 ` [PATCH v3 4/4] soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS) Florian Fainelli
2017-07-18 19:52 ` [PATCH v3 0/4] Broadcom STB S2/S3/S5 support for ARM and MIPS Florian Fainelli
2017-07-28 23:59 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170706222225.9758-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).