From: jack@suse.cz (Jan Kara)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/5] dax: move all DAX radix tree defs to fs/dax.c
Date: Mon, 24 Jul 2017 13:48:59 +0200 [thread overview]
Message-ID: <20170724114859.GM652@quack2.suse.cz> (raw)
In-Reply-To: <20170721223956.29485-6-ross.zwisler@linux.intel.com>
On Fri 21-07-17 16:39:55, Ross Zwisler wrote:
> Now that we no longer insert struct page pointers in DAX radix trees the
> page cache code no longer needs to know anything about DAX exceptional
> entries. Move all the DAX exceptional entry definitions from dax.h to
> fs/dax.c.
>
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> Suggested-by: Jan Kara <jack@suse.cz>
Looks good. You can add:
Reviewed-by: Jan Kara <jack@suse.cz>
Honza
> ---
> fs/dax.c | 34 ++++++++++++++++++++++++++++++++++
> include/linux/dax.h | 41 -----------------------------------------
> 2 files changed, 34 insertions(+), 41 deletions(-)
>
> diff --git a/fs/dax.c b/fs/dax.c
> index 0e27d90..e7acc45 100644
> --- a/fs/dax.c
> +++ b/fs/dax.c
> @@ -54,6 +54,40 @@ static int __init init_dax_wait_table(void)
> }
> fs_initcall(init_dax_wait_table);
>
> +/*
> + * We use lowest available bit in exceptional entry for locking, one bit for
> + * the entry size (PMD) and two more to tell us if the entry is a zero page or
> + * an empty entry that is just used for locking. In total four special bits.
> + *
> + * If the PMD bit isn't set the entry has size PAGE_SIZE, and if the ZERO_PAGE
> + * and EMPTY bits aren't set the entry is a normal DAX entry with a filesystem
> + * block allocation.
> + */
> +#define RADIX_DAX_SHIFT (RADIX_TREE_EXCEPTIONAL_SHIFT + 4)
> +#define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT)
> +#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
> +#define RADIX_DAX_ZERO_PAGE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
> +#define RADIX_DAX_EMPTY (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 3))
> +
> +static unsigned long dax_radix_sector(void *entry)
> +{
> + return (unsigned long)entry >> RADIX_DAX_SHIFT;
> +}
> +
> +static void *dax_radix_locked_entry(sector_t sector, unsigned long flags)
> +{
> + return (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | flags |
> + ((unsigned long)sector << RADIX_DAX_SHIFT) |
> + RADIX_DAX_ENTRY_LOCK);
> +}
> +
> +static unsigned int dax_radix_order(void *entry)
> +{
> + if ((unsigned long)entry & RADIX_DAX_PMD)
> + return PMD_SHIFT - PAGE_SHIFT;
> + return 0;
> +}
> +
> static int dax_is_pmd_entry(void *entry)
> {
> return (unsigned long)entry & RADIX_DAX_PMD;
> diff --git a/include/linux/dax.h b/include/linux/dax.h
> index afa99bb..d0e3272 100644
> --- a/include/linux/dax.h
> +++ b/include/linux/dax.h
> @@ -88,33 +88,6 @@ void dax_flush(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
> size_t size);
> void dax_write_cache(struct dax_device *dax_dev, bool wc);
>
> -/*
> - * We use lowest available bit in exceptional entry for locking, one bit for
> - * the entry size (PMD) and two more to tell us if the entry is a zero page or
> - * an empty entry that is just used for locking. In total four special bits.
> - *
> - * If the PMD bit isn't set the entry has size PAGE_SIZE, and if the ZERO_PAGE
> - * and EMPTY bits aren't set the entry is a normal DAX entry with a filesystem
> - * block allocation.
> - */
> -#define RADIX_DAX_SHIFT (RADIX_TREE_EXCEPTIONAL_SHIFT + 4)
> -#define RADIX_DAX_ENTRY_LOCK (1 << RADIX_TREE_EXCEPTIONAL_SHIFT)
> -#define RADIX_DAX_PMD (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 1))
> -#define RADIX_DAX_ZERO_PAGE (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 2))
> -#define RADIX_DAX_EMPTY (1 << (RADIX_TREE_EXCEPTIONAL_SHIFT + 3))
> -
> -static inline unsigned long dax_radix_sector(void *entry)
> -{
> - return (unsigned long)entry >> RADIX_DAX_SHIFT;
> -}
> -
> -static inline void *dax_radix_locked_entry(sector_t sector, unsigned long flags)
> -{
> - return (void *)(RADIX_TREE_EXCEPTIONAL_ENTRY | flags |
> - ((unsigned long)sector << RADIX_DAX_SHIFT) |
> - RADIX_DAX_ENTRY_LOCK);
> -}
> -
> ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter,
> const struct iomap_ops *ops);
> int dax_iomap_fault(struct vm_fault *vmf, enum page_entry_size pe_size,
> @@ -136,20 +109,6 @@ static inline int __dax_zero_page_range(struct block_device *bdev,
> }
> #endif
>
> -#ifdef CONFIG_FS_DAX_PMD
> -static inline unsigned int dax_radix_order(void *entry)
> -{
> - if ((unsigned long)entry & RADIX_DAX_PMD)
> - return PMD_SHIFT - PAGE_SHIFT;
> - return 0;
> -}
> -#else
> -static inline unsigned int dax_radix_order(void *entry)
> -{
> - return 0;
> -}
> -#endif
> -
> static inline bool dax_mapping(struct address_space *mapping)
> {
> return mapping->host && IS_DAX(mapping->host);
> --
> 2.9.4
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
prev parent reply other threads:[~2017-07-24 11:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-21 22:39 [PATCH v4 0/5] DAX common 4k zero page Ross Zwisler
2017-07-21 22:39 ` [PATCH v4 1/5] mm: add mkwrite param to vm_insert_mixed() Ross Zwisler
2017-07-22 16:21 ` Dan Williams
2017-07-24 11:15 ` Jan Kara
2017-07-24 15:13 ` Ross Zwisler
2017-07-24 11:25 ` Jan Kara
2017-07-24 15:23 ` Ross Zwisler
2017-07-24 15:59 ` Jan Kara
2017-07-21 22:39 ` [PATCH v4 2/5] dax: relocate some dax functions Ross Zwisler
2017-07-24 11:35 ` Jan Kara
2017-07-21 22:39 ` [PATCH v4 3/5] dax: use common 4k zero page for dax mmap reads Ross Zwisler
2017-07-24 11:46 ` Jan Kara
2017-07-21 22:39 ` [PATCH v4 4/5] dax: remove DAX code from page_cache_tree_insert() Ross Zwisler
2017-07-24 11:47 ` Jan Kara
2017-07-21 22:39 ` [PATCH v4 5/5] dax: move all DAX radix tree defs to fs/dax.c Ross Zwisler
2017-07-24 11:48 ` Jan Kara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170724114859.GM652@quack2.suse.cz \
--to=jack@suse.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).