[PATCH 5/5] arm64: dts: msm8996: Add QFPROM node

[bjorn.andersson@linaro.org (Bjorn Andersson)]

On Mon 24 Jul 23:09 PDT 2017, Vivek Gautam wrote:

> Hi Bjorn,
> 
> 
> On Tue, Jul 25, 2017 at 11:17 AM, Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> > From: Vivek Gautam <vivek.gautam@codeaurora.org>
> >
> > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > index 395666dcce1b..d0865d2f731e 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > @@ -496,6 +496,17 @@
> >                         status = "disabled";
> >                 };
> >
> > +               qfprom: qfprom at 74000 {
> > +                       compatible = "qcom,qfprom";
> > +                       reg = <0x00074000 0x8ff>;
> > +                       #address-cells = <1>;
> > +                       #size-cells = <1>;
> > +                       qusb2p_hstx_trim: hstx_trim at 24e {
> > +                               reg = <0x24e 0x2>;
> > +                               bits = <5 4>;
> > +                       };
> 
> There's one more part to it which will be used by the secondary
> USB2 controller.
> I was hoping to add this patch along with the USB device tree patches.
> Let me know if you are not using this patch for anything now, i can
> submit it along with the usb series.
> 

I omitted this due to the rpmcc dependency. But I must have looked at
the wrong node, as there is no such dependency.

So this should be replaced by the full 0387312d9f35 ("arm64: dts:
msm8996: Add device node for qcom qusb2 phy"), which has a commit
message as well.


Thanks for spotting my mistake.

Regards,
Bjorn