From: antoine.tenart@free-electrons.com (Antoine Tenart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next 10/18] net: mvpp2: use the GoP interrupt for link status changes
Date: Tue, 25 Jul 2017 10:47:35 +0200 [thread overview]
Message-ID: <20170725084735.GC2860@kwain> (raw)
In-Reply-To: <CAPv3WKcHtAKPKcfdC7xE-duhwMSRgSRW9_2B33Ru3KNfczZzMA@mail.gmail.com>
Hi Marcin,
On Tue, Jul 25, 2017 at 12:58:20AM +0200, Marcin Wojtas wrote:
>
> This patch requires also:
>
> diff --git a/drivers/net/ethernet/marvell/mvpp2.c
> b/drivers/net/ethernet/marvell/mvpp2.c
> index 4694d4f..369819f 100644
> --- a/drivers/net/ethernet/marvell/mvpp2.c
> +++ b/drivers/net/ethernet/marvell/mvpp2.c
> @@ -6625,6 +6625,7 @@ static int mvpp2_stop(struct net_device *dev)
> {
> struct mvpp2_port *port = netdev_priv(dev);
> struct mvpp2_port_pcpu *port_pcpu;
> + struct mvpp2 *priv = port->priv;
> int cpu;
>
> mvpp2_stop_dev(port);
> @@ -6633,6 +6634,10 @@ static int mvpp2_stop(struct net_device *dev)
> /* Mask interrupts on all CPUs */
> on_each_cpu(mvpp2_interrupts_mask, port, 1);
>
> + if (priv->hw_version == MVPP22 && !port->phy_node && port->link_irq) {
> + free_irq(port->link_irq, port);
> + }
> +
> free_irq(port->irq, port);
> for_each_present_cpu(cpu) {
> port_pcpu = per_cpu_ptr(port->pcpu, cpu);
>
> Otherwise a sequence: ifconfig up/down/up results in faults.
You're right, thanks for the patch! I'll squash it in v2.
Thanks!
Antoine
--
Antoine T?nart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170725/612d2885/attachment.sig>
next prev parent reply other threads:[~2017-07-25 8:47 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-24 13:48 [PATCH net-next 00/18] net: mvpp2: MAC/GoP configuration and optional PHYs Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 01/18] net: mvpp2: unify register definitions coding style Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 02/18] net: mvpp2: fix the synchronization module bypass macro name Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 03/18] net: mvpp2: set the SMI PHY address when connecting to the PHY Antoine Tenart
2017-07-24 16:40 ` Sergei Shtylyov
2017-07-25 8:42 ` Antoine Tenart
2017-07-26 16:08 ` Andrew Lunn
2017-07-28 1:49 ` Antoine Tenart
2017-07-28 4:21 ` Andrew Lunn
2017-08-22 14:41 ` Antoine Tenart
2017-08-22 14:50 ` Andrew Lunn
2017-08-23 10:40 ` [EXT] " Stefan Chulski
2017-08-23 12:34 ` Andrew Lunn
2017-08-23 13:30 ` Stefan Chulski
2017-08-23 13:34 ` Andrew Lunn
2017-07-24 13:48 ` [PATCH net-next 04/18] net: mvpp2: move the mii configuration in the ndo_open path Antoine Tenart
2017-07-26 16:11 ` Andrew Lunn
2017-07-28 1:44 ` Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 05/18] net: mvpp2: initialize the GMAC when using a port Antoine Tenart
2017-07-26 16:14 ` Andrew Lunn
2017-07-24 13:48 ` [PATCH net-next 06/18] net: mvpp2: initialize the XLG MAC " Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 07/18] net: mvpp2: initialize the GoP Antoine Tenart
2017-07-26 16:16 ` Andrew Lunn
2017-07-24 13:48 ` [PATCH net-next 08/18] net: mvpp2: make the phy optional Antoine Tenart
2017-07-26 16:20 ` Andrew Lunn
2017-07-28 1:50 ` Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 09/18] net: mvpp2: use named interrupts Antoine Tenart
2017-07-24 16:49 ` Sergei Shtylyov
2017-07-25 8:45 ` Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 10/18] net: mvpp2: use the GoP interrupt for link status changes Antoine Tenart
2017-07-24 22:58 ` Marcin Wojtas
2017-07-25 8:47 ` Antoine Tenart [this message]
2017-07-25 13:17 ` Thomas Petazzoni
2017-07-26 0:07 ` Antoine Tenart
2017-07-26 16:26 ` Andrew Lunn
2017-07-26 19:38 ` Russell King - ARM Linux
2017-08-23 8:25 ` Antoine Tenart
2017-08-23 15:24 ` [EXT] " Stefan Chulski
2017-08-23 16:04 ` Antoine Tenart
2017-08-23 21:05 ` Marcin Wojtas
2017-08-24 10:59 ` Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 11/18] Documentation/bindings: net: marvell-pp2: add the system controller Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 12/18] Documentation/bindings: net: marvell-pp2: add the interrupt-names Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 13/18] arm64: dts: marvell: cp110: use named interrupts for the Ethernet ports Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 14/18] arm64: dts: marvell: cp110: add PPv2 port interrupts Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 15/18] arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 16/18] arm64: dts: marvell: mcbin: enable more networking ports Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 17/18] arm64: dts: marvell: 7040-db: enable the SFP port Antoine Tenart
2017-07-24 13:48 ` [PATCH net-next 18/18] arm64: dts: marvell: 8040-db: enable the SFP ports Antoine Tenart
2017-07-24 23:56 ` [PATCH net-next 00/18] net: mvpp2: MAC/GoP configuration and optional PHYs Marcin Wojtas
2017-07-25 8:48 ` Antoine Tenart
2017-07-25 10:45 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170725084735.GC2860@kwain \
--to=antoine.tenart@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox