From: romain.perier@collabora.com (Romain Perier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v3 3/3] arm: dts: Add support for ES8323 to the Firefly-RK3288
Date: Wed, 26 Jul 2017 15:55:18 +0200 [thread overview]
Message-ID: <20170726135526.475-4-romain.perier@collabora.com> (raw)
In-Reply-To: <20170726135526.475-1-romain.perier@collabora.com>
This commit adds the DT definition of the es8388 i2c device found at
address 0x10. It also adds the definition for connecting the Rockchip
I2S to the es8323 analog output.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
---
arch/arm/boot/dts/rk3288-firefly.dtsi | 38 +++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 32dabae12e67..24e3fe77bc42 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -116,6 +116,19 @@
};
};
+ sound-i2s {
+ compatible = "rockchip,rk3288-hdmi-analog";
+ pinctrl-names = "default";
+ pinctrl-0 = <&phone_ctl>, <&hp_det>;
+ rockchip,audio-codec = <&es8323>;
+ rockchip,hp-det-gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ rockchip,hp-en-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,model = "I2S";
+ rockchip,routing = "Analog", "LOUT2",
+ "Analog", "ROUT2";
+ };
+
vbat_wl: vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
@@ -389,6 +402,17 @@
&i2c2 {
status = "okay";
+
+ es8323: es8323 at 10 {
+ compatible = "everest,es8323", "everest,es8328";
+ reg = <0x10>;
+ AVDD-supply = <&vcca_33>;
+ DVDD-supply = <&vcca_33>;
+ HPVDD-supply = <&vcca_33>;
+ PVDD-supply = <&vcca_33>;
+ clocks = <&cru SCLK_I2S0_OUT>;
+ clock-names = "i2s_clk_out";
+ };
};
&i2c4 {
@@ -399,6 +423,10 @@
status = "okay";
};
+&i2s {
+ status = "okay";
+};
+
&io_domains {
status = "okay";
@@ -501,6 +529,16 @@
};
};
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ phone_ctl: phone-ctl {
+ rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
usb_host {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.11.0
next prev parent reply other threads:[~2017-07-26 13:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 13:55 [PATCH RESEND v3 0/3] Add support for es8323 and hdmi audio to the firefly-rk3288 Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 1/3] SoC: es8328-i2c: Add compatible for ES8323 Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 2/3] arm: dts: rockchip: Don't set otp-gpio pinctrl by default in rk3288.dtsi Romain Perier
2017-07-26 13:55 ` Romain Perier [this message]
2017-07-26 13:55 ` [PATCH RESEND v3 0/3] Add support for es8323 and hdmi audio to the firefly-rk3288 Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 1/3] SoC: es8328-i2c: Add compatible for ES8323 Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 2/3] arm: dts: rockchip: Don't set otp-gpio pinctrl by default in rk3288.dtsi Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 3/3] arm: dts: Add support for ES8323 to the Firefly-RK3288 Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 0/3] Add support for es8323 and hdmi audio to the firefly-rk3288 Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 1/3] SoC: es8328-i2c: Add compatible for ES8323 Romain Perier
2017-08-03 19:01 ` Rob Herring
2017-08-04 6:44 ` Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 2/3] arm: dts: rockchip: Don't set otp-gpio pinctrl by default in rk3288.dtsi Romain Perier
2017-07-26 13:55 ` [PATCH RESEND v3 3/3] arm: dts: Add support for ES8323 to the Firefly-RK3288 Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170726135526.475-4-romain.perier@collabora.com \
--to=romain.perier@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox