RCU lockup issues when CONFIG_SOFTLOCKUP_DETECTOR=n - any one else seeing this?

[paulmck@linux.vnet.ibm.com (Paul E. McKenney)]

On Fri, Jul 28, 2017 at 02:24:03PM +0100, Jonathan Cameron wrote:
> On Fri, 28 Jul 2017 08:44:11 +0100
> Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:

[ . . . ]

> Ok.  Some info.  I disabled a few driver (usb and SAS) in the interest of having
> fewer timer events.  Issue became much easier to trigger (on some runs before
> I could get tracing up and running)
>e
> So logs are large enough that pastebin doesn't like them - please shoet if
>>e another timer period is of interest.
> 
> https://pastebin.com/iUZDfQGM for the timer trace.
> https://pastebin.com/3w1F7amH for dmesg.  
> 
> The relevant timeout on the RCU stall detector was 8 seconds.  Event is
> detected around 835.
> 
> It's a lot of logs, so I haven't identified a smoking gun yet but there
> may well be one in there.

The dmesg says:

rcu_preempt kthread starved for 2508 jiffies! g112 c111 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1

So I look for "rcu_preempt" timer events and find these:

rcu_preempt-9     [019] ....   827.579114: timer_init: timer=ffff8017d5fc7da0
rcu_preempt-9     [019] d..1   827.579115: timer_start: timer=ffff8017d5fc7da0 function=process_timeout 

Next look for "ffff8017d5fc7da0" and I don't find anything else.

The timeout was one jiffy, and more than a second later, no expiration.
Is it possible that this event was lost?  I am not seeing any sign of
this is the trace.

I don't see any sign of CPU hotplug (and I test with lots of that in
any case).

The last time we saw something like this it was a timer HW/driver problem,
but it is a bit hard to imagine such a problem affecting both ARM64
and SPARC.  ;-)

Thomas, any debugging suggestions?

							Thanx, Paul