linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 06/12] ASoC: sun4i-i2s: Add changes for wss and sr
Date: Sat, 29 Jul 2017 16:17:47 +0200	[thread overview]
Message-ID: <20170729141753.20174-7-codekipper@gmail.com> (raw)
In-Reply-To: <20170729141753.20174-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

On newer SoCs the location of the slot width select and sample
resolution are different and also there is a bigger range of
support.

For the current supported rates then an offset is required.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 120f797a38e8..171df99a267e 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -98,6 +98,9 @@
  * @sun4i_i2s_regmap: regmap config to use.
  * @mclk_offset: Value by which mclkdiv needs to be adjusted.
  * @bclk_offset: Value by which bclkdiv needs to be adjusted.
+ * @fmt_offset: Value by which wss and sr needs to be adjusted.
+ * @field_fmt_set_wss: regmap field to set word select size.
+ * @field_fmt_set_sr: regmap field to set sample resolution.
  * @field_txchanmap: location of the tx channel mapping register.
  * @field_rxchanmap: location of the rx channel mapping register.
  * @field_txchansel: location of the tx channel select bit fields.
@@ -109,8 +112,11 @@ struct sun4i_i2s_quirks {
 	const struct regmap_config	*sun4i_i2s_regmap;
 	unsigned int			mclk_offset;
 	unsigned int			bclk_offset;
+	unsigned int			fmt_offset;
 
 	/* Register fields for i2s */
+	struct reg_field		field_fmt_set_wss;
+	struct reg_field		field_fmt_set_sr;
 	struct reg_field		field_txchanmap;
 	struct reg_field		field_rxchanmap;
 	struct reg_field		field_txchansel;
@@ -129,6 +135,8 @@ struct sun4i_i2s {
 	struct snd_dmaengine_dai_dma_data	playback_dma_data;
 
 	/* Register fields for i2s */
+	struct regmap_field	*field_fmt_set_wss;
+	struct regmap_field	*field_fmt_set_sr;
 	struct regmap_field	*field_txchanmap;
 	struct regmap_field	*field_rxchanmap;
 	struct regmap_field	*field_txchansel;
@@ -311,9 +319,10 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
-			   SUN4I_I2S_FMT0_WSS_MASK | SUN4I_I2S_FMT0_SR_MASK,
-			   SUN4I_I2S_FMT0_WSS(wss) | SUN4I_I2S_FMT0_SR(sr));
+	regmap_field_write(i2s->field_fmt_set_wss,
+			   wss + i2s->variant->fmt_offset);
+	regmap_field_write(i2s->field_fmt_set_sr,
+			   sr + i2s->variant->fmt_offset);
 
 	return sun4i_i2s_set_clk_rate(i2s, params_rate(params),
 				      params_width(params));
@@ -698,6 +707,8 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
 	.has_reset		= false,
 	.reg_offset_txdata	= SUN4I_I2S_FIFO_TX_REG,
 	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
+	.field_fmt_set_wss	= REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
+	.field_fmt_set_sr	= REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
 	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
 	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
 	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
@@ -708,6 +719,8 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
 	.has_reset		= true,
 	.reg_offset_txdata	= SUN4I_I2S_FIFO_TX_REG,
 	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
+	.field_fmt_set_wss	= REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
+	.field_fmt_set_sr	= REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
 	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
 	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
 	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
@@ -716,6 +729,18 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
 
 static int sun4i_i2s_init_regmap_fields(struct device *dev, struct sun4i_i2s *i2s)
 {
+	i2s->field_fmt_set_wss =
+		devm_regmap_field_alloc(dev, i2s->regmap,
+					i2s->variant->field_fmt_set_wss);
+	if (IS_ERR(i2s->field_fmt_set_wss))
+		return PTR_ERR(i2s->field_fmt_set_wss);
+
+	i2s->field_fmt_set_sr =
+		devm_regmap_field_alloc(dev, i2s->regmap,
+					i2s->variant->field_fmt_set_sr);
+	if (IS_ERR(i2s->field_fmt_set_sr))
+		return PTR_ERR(i2s->field_fmt_set_sr);
+
 	i2s->field_txchanmap =
 		devm_regmap_field_alloc(dev, i2s->regmap,
 					i2s->variant->field_txchanmap);
-- 
2.13.3

  parent reply	other threads:[~2017-07-29 14:17 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-29 14:17 [PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs codekipper at gmail.com
2017-07-29 14:17 ` [PATCH v3 01/12] ASoC: sun4i-i2s: Extend quirks scope codekipper at gmail.com
2017-08-01  2:50   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-01 14:16   ` Applied "ASoC: sun4i-i2s: Extend quirks scope" to the asoc tree Mark Brown
2017-07-29 14:17 ` [PATCH v3 02/12] ASoC: sun4i-i2s: Add clkdiv offsets to quirks codekipper at gmail.com
2017-08-01  2:55   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-07  6:20     ` Code Kipper
2017-07-29 14:17 ` [PATCH v3 03/12] ASoC: sun4i-i2s: Add regmap config " codekipper at gmail.com
2017-08-01  8:10   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-14 16:43   ` Applied "ASoC: sun4i-i2s: Add regmap config to quirks" to the asoc tree Mark Brown
2017-07-29 14:17 ` [PATCH v3 04/12] ASoC: sun4i-i2s: Add TX FIFO offset to quirks codekipper at gmail.com
2017-08-01  8:18   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-14 16:43   ` Applied "ASoC: sun4i-i2s: Add TX FIFO offset to quirks" to the asoc tree Mark Brown
2017-07-29 14:17 ` [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels codekipper at gmail.com
2017-07-30 16:43   ` [alsa-devel] " kbuild test robot
2017-07-30 16:43   ` [PATCH] ASoC: sun4i-i2s: fix ptr_ret.cocci warnings kbuild test robot
2017-08-01  8:31   ` [linux-sunxi] [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels Chen-Yu Tsai
2017-08-07  7:39     ` Code Kipper
2017-07-29 14:17 ` codekipper at gmail.com [this message]
2017-08-01  8:49   ` [linux-sunxi] [PATCH v3 06/12] ASoC: sun4i-i2s: Add changes for wss and sr Chen-Yu Tsai
2017-08-02  3:06   ` Chen-Yu Tsai
2017-07-29 14:17 ` [PATCH v3 07/12] ASoC: sun4i-i2s: bclk and lrclk polarity tidyup codekipper at gmail.com
2017-08-02  3:09   ` [linux-sunxi] " Chen-Yu Tsai
2017-07-29 14:17 ` [PATCH v3 08/12] ASoC: sun4i-i2s: Add mclk enable regmap field codekipper at gmail.com
2017-08-02  3:20   ` [linux-sunxi] " Chen-Yu Tsai
2017-07-29 14:17 ` [PATCH v3 09/12] ASoC: sun4i-i2s: Add regmap field to set format codekipper at gmail.com
2017-08-02  3:32   ` [linux-sunxi] " Chen-Yu Tsai
2017-07-29 14:17 ` [PATCH v3 10/12] ASoC: sun4i-i2s: Check for slave select bit codekipper at gmail.com
2017-08-02  3:50   ` [linux-sunxi] " Chen-Yu Tsai
2017-07-29 14:17 ` [PATCH v3 11/12] ASoC: sun4i-i2s: Update global enable with bitmask codekipper at gmail.com
2017-08-02  3:55   ` [linux-sunxi] " Chen-Yu Tsai
2017-07-29 14:17 ` [PATCH v3 12/12] ASoC: sun4i-i2s: Add support for H3 codekipper at gmail.com
2017-08-02  4:37   ` [linux-sunxi] " Chen-Yu Tsai
2017-07-31  7:05 ` [linux-sunxi] [PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs Olliver Schinagl
2017-07-31 14:22   ` Code Kipper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170729141753.20174-7-codekipper@gmail.com \
    --to=codekipper@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).