linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jlu@pengutronix.de (Jan Luebbe)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/9] EDAC drivers for Armada XP L2 and DDR
Date: Wed,  2 Aug 2017 14:39:13 +0200	[thread overview]
Message-ID: <20170802123922.11498-1-jlu@pengutronix.de> (raw)

This series adds drivers for the L2 cache and DDR RAM ECC functionality as
found on the MV78230/MV78x60 SoCs. I've tested these changes with the MV78460
(on a custom board with a DDR3 ECC DIMM).

Also contained in this series are an additional debugfs wrapper and devm_
helpers for edac_mc_/edac_device_ allocation and registration, which make error
handing and cleanup simpler.

Compared to the previous v1 series, the following changes have been made:
- Add the aurora-l2 register defines earlier in the series (suggested by
  Russell King and Gregory CLEMENT )
- Changed the DT vendor prefix from "arm" to "marvell" for the ecc-enable/disable
  properties on the aurora-l2 (suggested by Russell King)
- Fix some warnings reported by checkpatch

Compared to the original RFC series, the following changes have been made:
- Integrated Chris' patches for parity and ECC configuration via DT
- Merged the DDR RAM and L2 cache drivers (as requested by Borislav, analogous
  to fsl_ddr_edac.c and mpc85xx_edac.c)
- Added myself to MAINTAINERS (requested by Borislav)
- L2 cache: Track the msg size and use snprintf (review comment by Chris)
- L2 cache: Split error injection from the check function (review comment by
  Chris)
- DDR RAM: Allow 16 bit width in addition to 32 and 64 bit (review comment by
  Chris)
- Use of_match_ptr() (review comments by Chris)
- Minor checkpatch cleanups

Chris Packham (2):
  ARM: l2x0: support parity-enable/disable on aurora
  ARM: l2x0: add marvell,ecc-enable property for aurora

Jan Luebbe (7):
  ARM: l2c: move cache-aurora-l2.h to asm/hardware
  ARM: aurora-l2: add prefix to MAX_RANGE_SIZE
  ARM: aurora-l2: add defines for parity and ECC registers
  EDAC: Add missing debugfs_create_x32 wrapper
  EDAC: Add devres helpers for
    edac_mc_alloc/edac_mc_add_mc(_with_groups)
  EDAC: Add devres helpers for
    edac_device_alloc_ctl_info/edac_device_add_device
  EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC

 Documentation/devicetree/bindings/arm/l2c2x0.txt |   2 +
 MAINTAINERS                                      |   6 +
 arch/arm/include/asm/hardware/cache-aurora-l2.h  | 103 ++++
 arch/arm/mm/cache-aurora-l2.h                    |  55 --
 arch/arm/mm/cache-l2x0.c                         |  20 +-
 drivers/edac/Kconfig                             |   7 +
 drivers/edac/Makefile                            |   1 +
 drivers/edac/armada_xp_edac.c                    | 639 +++++++++++++++++++++++
 drivers/edac/debugfs.c                           |  11 +
 drivers/edac/edac_device.c                       |  60 +++
 drivers/edac/edac_device.h                       |  29 +
 drivers/edac/edac_mc.c                           |  54 ++
 drivers/edac/edac_mc.h                           |  26 +
 drivers/edac/edac_module.h                       |   5 +
 14 files changed, 960 insertions(+), 58 deletions(-)
 create mode 100644 arch/arm/include/asm/hardware/cache-aurora-l2.h
 delete mode 100644 arch/arm/mm/cache-aurora-l2.h
 create mode 100644 drivers/edac/armada_xp_edac.c

-- 
2.11.0

             reply	other threads:[~2017-08-02 12:39 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-02 12:39 Jan Luebbe [this message]
2017-08-02 12:39 ` [PATCH v2 1/9] ARM: l2c: move cache-aurora-l2.h to asm/hardware Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 2/9] ARM: aurora-l2: add prefix to MAX_RANGE_SIZE Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 3/9] ARM: aurora-l2: add defines for parity and ECC registers Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 4/9] ARM: l2x0: support parity-enable/disable on aurora Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 5/9] ARM: l2x0: add marvell,ecc-enable property for aurora Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 6/9] EDAC: Add missing debugfs_create_x32 wrapper Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 7/9] EDAC: Add devres helpers for edac_mc_alloc/edac_mc_add_mc(_with_groups) Jan Luebbe
2017-08-14 11:01   ` Borislav Petkov
2017-08-02 12:39 ` [PATCH v2 8/9] EDAC: Add devres helpers for edac_device_alloc_ctl_info/edac_device_add_device Jan Luebbe
2017-08-02 12:39 ` [PATCH v2 9/9] EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC Jan Luebbe
2017-08-04  5:10   ` Chris Packham
2017-08-02 14:05 ` [PATCH v2 0/9] EDAC drivers for Armada XP L2 and DDR Borislav Petkov
2017-08-14  9:01   ` Jan Lübbe
2017-08-14  9:09     ` Russell King - ARM Linux
2017-08-04  1:42 ` Chris Packham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170802123922.11498-1-jlu@pengutronix.de \
    --to=jlu@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).