From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: r8a7743: Add IIC cores to dtsi
Date: Wed, 9 Aug 2017 10:56:22 +0200 [thread overview]
Message-ID: <20170809085622.GL2705@verge.net.au> (raw)
In-Reply-To: <1502196418-31341-1-git-send-email-biju.das@bp.renesas.com>
On Tue, Aug 08, 2017 at 01:46:58PM +0100, Biju Das wrote:
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> ---
> This patch has been tested against Linux-next tag 20170727 and renesas-dev branch.
> This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html
Process comments as per those for
"[PATCH 2/2] ARM: dts: r8a7743: Add I2C DT support".
Patch itself looks good to me.
>
> arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
> index 14222c72..5c2b140 100644
> --- a/arch/arm/boot/dts/r8a7743.dtsi
> +++ b/arch/arm/boot/dts/r8a7743.dtsi
> @@ -25,6 +25,9 @@
> i2c3 = &i2c3;
> i2c4 = &i2c4;
> i2c5 = &i2c5;
> + i2c6 = &i2c6;
> + i2c7 = &i2c7;
> + i2c8 = &i2c8;
> };
>
> cpus {
> @@ -436,6 +439,58 @@
> status = "disabled";
> };
>
> + i2c6: i2c at e60b0000 {
> + /* doesn't need pinmux */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,iic-r8a7743",
> + "renesas,rcar-gen2-iic",
> + "renesas,rmobile-iic";
> + reg = <0 0xe60b0000 0 0x425>;
> + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 926>;
> + dmas = <&dmac0 0x77>, <&dmac0 0x78>,
> + <&dmac1 0x77>, <&dmac1 0x78>;
> + dma-names = "tx", "rx", "tx", "rx";
> + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> + resets = <&cpg CPG_MOD 926>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c at e6500000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,iic-r8a7743",
> + "renesas,rcar-gen2-iic",
> + "renesas,rmobile-iic";
> + reg = <0 0xe6500000 0 0x425>;
> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 318>;
> + dmas = <&dmac0 0x61>, <&dmac0 0x62>,
> + <&dmac1 0x61>, <&dmac1 0x62>;
> + dma-names = "tx", "rx", "tx", "rx";
> + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> + resets = <&cpg 318>;
> + status = "disabled";
> + };
> +
> + i2c8: i2c at e6510000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,iic-r8a7743",
> + "renesas,rcar-gen2-iic",
> + "renesas,rmobile-iic";
> + reg = <0 0xe6510000 0 0x425>;
> + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 323>;
> + dmas = <&dmac0 0x65>, <&dmac0 0x66>,
> + <&dmac1 0x65>, <&dmac1 0x66>;
> + dma-names = "tx", "rx", "tx", "rx";
> + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> + resets = <&cpg 323>;
> + status = "disabled";
> + };
> +
> scifa0: serial at e6c40000 {
> compatible = "renesas,scifa-r8a7743",
> "renesas,rcar-gen2-scifa", "renesas,scifa";
> --
> 1.9.1
>
next prev parent reply other threads:[~2017-08-09 8:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-08 12:46 [PATCH 2/2] ARM: dts: r8a7743: Add IIC cores to dtsi Biju Das
2017-08-09 8:56 ` Simon Horman [this message]
2017-08-09 9:17 ` Sergei Shtylyov
2017-08-09 9:21 ` Biju Das
2017-08-10 8:01 ` Simon Horman
2017-08-10 11:24 ` Wolfram Sang
2017-08-10 13:49 ` Chris Paterson
2017-08-11 8:48 ` Simon Horman
2017-08-14 14:15 ` Geert Uytterhoeven
2017-08-22 12:20 ` Sergei Shtylyov
2017-08-14 9:53 ` [PATCH v2] ARM: dts: r8a7743: add " Biju Das
2017-08-22 9:10 ` Chris Paterson
2017-08-22 12:23 ` Sergei Shtylyov
2017-08-30 7:32 ` Simon Horman
2017-08-30 7:46 ` Chris Paterson
2017-09-06 13:52 ` [PATCH v3] ARM: dts: r8a7743: Add " Chris Paterson
2017-09-11 7:25 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170809085622.GL2705@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox