* [PATCH 0/2] Add BQ32000 RTC support for iWave RZ/G1M board @ 2017-08-08 13:04 Biju Das 2017-08-08 13:04 ` [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support Biju Das 2017-08-08 13:04 ` [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig Biju Das 0 siblings, 2 replies; 11+ messages in thread From: Biju Das @ 2017-08-08 13:04 UTC (permalink / raw) To: linux-arm-kernel This series aims to add BQ32000 RTC support for iWave RZ/G1M board. This series has been tested against Linux-next tag 20170727 and renesas-dev branch. This patch series depends on https://www.spinics.net/lists/arm-kernel/msg599220.html Biju Das (2): ARM: dts: iwg20d-q7: Add RTC support ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 18 ++++++++++++++++++ arch/arm/configs/shmobile_defconfig | 1 + 2 files changed, 19 insertions(+) -- 1.9.1 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support 2017-08-08 13:04 [PATCH 0/2] Add BQ32000 RTC support for iWave RZ/G1M board Biju Das @ 2017-08-08 13:04 ` Biju Das 2017-08-09 9:02 ` Simon Horman 2017-08-14 14:11 ` Geert Uytterhoeven 2017-08-08 13:04 ` [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig Biju Das 1 sibling, 2 replies; 11+ messages in thread From: Biju Das @ 2017-08-08 13:04 UTC (permalink / raw) To: linux-arm-kernel Define the iWave RainboW-G20D-Qseven board dependent part of the RTC device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 081af01..b3a1efa 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -31,6 +31,11 @@ groups = "avb_mdio", "avb_gmii"; function = "avb"; }; + + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; }; &scif0 { @@ -54,3 +59,16 @@ micrel,led-mode = <1>; }; }; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc at 68 { + compatible = "bq32000"; + reg = <0x68>; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support 2017-08-08 13:04 ` [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support Biju Das @ 2017-08-09 9:02 ` Simon Horman 2017-08-14 5:38 ` Simon Horman 2017-08-14 14:11 ` Geert Uytterhoeven 1 sibling, 1 reply; 11+ messages in thread From: Simon Horman @ 2017-08-09 9:02 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 08, 2017 at 02:04:24PM +0100, Biju Das wrote: > Define the iWave RainboW-G20D-Qseven board dependent part of the > RTC device node. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > --- > arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) This has a compile-time dependency on "[PATCH 2/2] ARM: dts: r8a7743: Add I2C DT support" for the i2c2 node, right? > > diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts > index 081af01..b3a1efa 100644 > --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts > +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts > @@ -31,6 +31,11 @@ > groups = "avb_mdio", "avb_gmii"; > function = "avb"; > }; > + > + i2c2_pins: i2c2 { > + groups = "i2c2"; > + function = "i2c2"; > + }; > }; > > &scif0 { > @@ -54,3 +59,16 @@ > micrel,led-mode = <1>; > }; > }; > + > +&i2c2 { > + pinctrl-0 = <&i2c2_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > + clock-frequency = <400000>; > + > + rtc at 68 { > + compatible = "bq32000"; > + reg = <0x68>; > + }; > +}; > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support 2017-08-09 9:02 ` Simon Horman @ 2017-08-14 5:38 ` Simon Horman 0 siblings, 0 replies; 11+ messages in thread From: Simon Horman @ 2017-08-14 5:38 UTC (permalink / raw) To: linux-arm-kernel On Wed, Aug 09, 2017 at 11:02:30AM +0200, Simon Horman wrote: > On Tue, Aug 08, 2017 at 02:04:24PM +0100, Biju Das wrote: > > Define the iWave RainboW-G20D-Qseven board dependent part of the > > RTC device node. > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > --- > > arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 18 ++++++++++++++++++ > > 1 file changed, 18 insertions(+) > > This has a compile-time dependency on > "[PATCH 2/2] ARM: dts: r8a7743: Add I2C DT support" > for the i2c2 node, right? As I have now applied the above dependency I have also applied this patch for v4.14. ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support 2017-08-08 13:04 ` [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support Biju Das 2017-08-09 9:02 ` Simon Horman @ 2017-08-14 14:11 ` Geert Uytterhoeven 2017-08-14 14:26 ` Biju Das 1 sibling, 1 reply; 11+ messages in thread From: Geert Uytterhoeven @ 2017-08-14 14:11 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 8, 2017 at 3:04 PM, Biju Das <biju.das@bp.renesas.com> wrote: > Define the iWave RainboW-G20D-Qseven board dependent part of the > RTC device node. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > @@ -54,3 +59,16 @@ > micrel,led-mode = <1>; > }; > }; > + > +&i2c2 { > + pinctrl-0 = <&i2c2_pins>; > + pinctrl-names = "default"; > + > + status = "okay"; > + clock-frequency = <400000>; > + > + rtc at 68 { > + compatible = "bq32000"; "ti,bq32000" > + reg = <0x68>; > + }; > +}; Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support 2017-08-14 14:11 ` Geert Uytterhoeven @ 2017-08-14 14:26 ` Biju Das 2017-08-15 15:45 ` Simon Horman 0 siblings, 1 reply; 11+ messages in thread From: Biju Das @ 2017-08-14 14:26 UTC (permalink / raw) To: linux-arm-kernel > -----Original Message----- > From: geert.uytterhoeven at gmail.com [mailto:geert.uytterhoeven at gmail.com] > On Behalf Of Geert Uytterhoeven > Sent: 14 August 2017 15:12 > To: Biju Das <biju.das@bp.renesas.com> > Cc: Rob Herring <robh+dt@kernel.org>; Mark Rutland > <mark.rutland@arm.com>; Simon Horman <horms@verge.net.au>; Magnus > Damm <magnus.damm@gmail.com>; Russell King <linux@armlinux.org.uk>; > Chris Paterson <Chris.Paterson2@renesas.com>; devicetree at vger.kernel.org; > Linux-Renesas <linux-renesas-soc@vger.kernel.org>; linux-arm- > kernel at lists.infradead.org > Subject: Re: [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support > > On Tue, Aug 8, 2017 at 3:04 PM, Biju Das <biju.das@bp.renesas.com> wrote: > > Define the iWave RainboW-G20D-Qseven board dependent part of the RTC > > device node. > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > > @@ -54,3 +59,16 @@ > > micrel,led-mode = <1>; > > }; > > }; > > + > > +&i2c2 { > > + pinctrl-0 = <&i2c2_pins>; > > + pinctrl-names = "default"; > > + > > + status = "okay"; > > + clock-frequency = <400000>; > > + > > + rtc at 68 { > > + compatible = "bq32000"; > > "ti,bq32000" Thanks. I will change this. > > + reg = <0x68>; > > + }; > > +}; > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux- > m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709. ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support 2017-08-14 14:26 ` Biju Das @ 2017-08-15 15:45 ` Simon Horman 0 siblings, 0 replies; 11+ messages in thread From: Simon Horman @ 2017-08-15 15:45 UTC (permalink / raw) To: linux-arm-kernel On Mon, Aug 14, 2017 at 02:26:08PM +0000, Biju Das wrote: > > > > -----Original Message----- > > From: geert.uytterhoeven at gmail.com [mailto:geert.uytterhoeven at gmail.com] > > On Behalf Of Geert Uytterhoeven > > Sent: 14 August 2017 15:12 > > To: Biju Das <biju.das@bp.renesas.com> > > Cc: Rob Herring <robh+dt@kernel.org>; Mark Rutland > > <mark.rutland@arm.com>; Simon Horman <horms@verge.net.au>; Magnus > > Damm <magnus.damm@gmail.com>; Russell King <linux@armlinux.org.uk>; > > Chris Paterson <Chris.Paterson2@renesas.com>; devicetree at vger.kernel.org; > > Linux-Renesas <linux-renesas-soc@vger.kernel.org>; linux-arm- > > kernel at lists.infradead.org > > Subject: Re: [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support > > > > On Tue, Aug 8, 2017 at 3:04 PM, Biju Das <biju.das@bp.renesas.com> wrote: > > > Define the iWave RainboW-G20D-Qseven board dependent part of the RTC > > > device node. > > > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > > > > @@ -54,3 +59,16 @@ > > > micrel,led-mode = <1>; > > > }; > > > }; > > > + > > > +&i2c2 { > > > + pinctrl-0 = <&i2c2_pins>; > > > + pinctrl-names = "default"; > > > + > > > + status = "okay"; > > > + clock-frequency = <400000>; > > > + > > > + rtc at 68 { > > > + compatible = "bq32000"; > > > > "ti,bq32000" > > Thanks. I will change this. Thanks, I have dropped this patch for now. Please submit a v2. ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig 2017-08-08 13:04 [PATCH 0/2] Add BQ32000 RTC support for iWave RZ/G1M board Biju Das 2017-08-08 13:04 ` [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support Biju Das @ 2017-08-08 13:04 ` Biju Das 2017-08-09 9:04 ` Simon Horman 1 sibling, 1 reply; 11+ messages in thread From: Biju Das @ 2017-08-08 13:04 UTC (permalink / raw) To: linux-arm-kernel The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- arch/arm/configs/shmobile_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 18886c5..7b4fc01 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -193,6 +193,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y +CONFIG_RTC_DRV_BQ32K=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_RX8581=y CONFIG_RTC_DRV_DA9063=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig 2017-08-08 13:04 ` [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig Biju Das @ 2017-08-09 9:04 ` Simon Horman 2017-08-17 9:01 ` Simon Horman 0 siblings, 1 reply; 11+ messages in thread From: Simon Horman @ 2017-08-09 9:04 UTC (permalink / raw) To: linux-arm-kernel On Tue, Aug 08, 2017 at 02:04:25PM +0100, Biju Das wrote: > The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). > To increase hardware support enable the driver in the > shmobile_defconfig multiplatform configuration. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> Thanks, applied for v4.14. > --- > arch/arm/configs/shmobile_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig > index 18886c5..7b4fc01 100644 > --- a/arch/arm/configs/shmobile_defconfig > +++ b/arch/arm/configs/shmobile_defconfig > @@ -193,6 +193,7 @@ CONFIG_LEDS_CLASS=y > CONFIG_LEDS_GPIO=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_DRV_RS5C372=y > +CONFIG_RTC_DRV_BQ32K=y > CONFIG_RTC_DRV_S35390A=y > CONFIG_RTC_DRV_RX8581=y > CONFIG_RTC_DRV_DA9063=y > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig 2017-08-09 9:04 ` Simon Horman @ 2017-08-17 9:01 ` Simon Horman 2017-08-17 9:04 ` Biju Das 0 siblings, 1 reply; 11+ messages in thread From: Simon Horman @ 2017-08-17 9:01 UTC (permalink / raw) To: linux-arm-kernel On Wed, Aug 09, 2017 at 11:04:21AM +0200, Simon Horman wrote: > On Tue, Aug 08, 2017 at 02:04:25PM +0100, Biju Das wrote: > > The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). > > To increase hardware support enable the driver in the > > shmobile_defconfig multiplatform configuration. > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > Thanks, applied for v4.14. Please consider posting a similar patch for multi_v7_defconfig. > > --- > > arch/arm/configs/shmobile_defconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig > > index 18886c5..7b4fc01 100644 > > --- a/arch/arm/configs/shmobile_defconfig > > +++ b/arch/arm/configs/shmobile_defconfig > > @@ -193,6 +193,7 @@ CONFIG_LEDS_CLASS=y > > CONFIG_LEDS_GPIO=y > > CONFIG_RTC_CLASS=y > > CONFIG_RTC_DRV_RS5C372=y > > +CONFIG_RTC_DRV_BQ32K=y > > CONFIG_RTC_DRV_S35390A=y > > CONFIG_RTC_DRV_RX8581=y > > CONFIG_RTC_DRV_DA9063=y > > -- > > 1.9.1 > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig 2017-08-17 9:01 ` Simon Horman @ 2017-08-17 9:04 ` Biju Das 0 siblings, 0 replies; 11+ messages in thread From: Biju Das @ 2017-08-17 9:04 UTC (permalink / raw) To: linux-arm-kernel > -----Original Message----- > From: Simon Horman [mailto:horms at verge.net.au] > Sent: 17 August 2017 10:01 > To: Biju Das <biju.das@bp.renesas.com> > Cc: Rob Herring <robh+dt@kernel.org>; Mark Rutland > <mark.rutland@arm.com>; Magnus Damm <magnus.damm@gmail.com>; > Russell King <linux@armlinux.org.uk>; Chris Paterson > <Chris.Paterson2@renesas.com>; devicetree at vger.kernel.org; linux-renesas- > soc at vger.kernel.org; linux-arm-kernel at lists.infradead.org > Subject: Re: [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in > shmobile_defconfig > > On Wed, Aug 09, 2017 at 11:04:21AM +0200, Simon Horman wrote: > > On Tue, Aug 08, 2017 at 02:04:25PM +0100, Biju Das wrote: > > > The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). > > > To increase hardware support enable the driver in the > > > shmobile_defconfig multiplatform configuration. > > > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > > > Thanks, applied for v4.14. > > Please consider posting a similar patch for multi_v7_defconfig. Thanks , I will do this. Regards, Biju Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709. ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-08-17 9:04 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-08-08 13:04 [PATCH 0/2] Add BQ32000 RTC support for iWave RZ/G1M board Biju Das 2017-08-08 13:04 ` [PATCH 1/2] ARM: dts: iwg20d-q7: Add RTC support Biju Das 2017-08-09 9:02 ` Simon Horman 2017-08-14 5:38 ` Simon Horman 2017-08-14 14:11 ` Geert Uytterhoeven 2017-08-14 14:26 ` Biju Das 2017-08-15 15:45 ` Simon Horman 2017-08-08 13:04 ` [PATCH 2/2] ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig Biju Das 2017-08-09 9:04 ` Simon Horman 2017-08-17 9:01 ` Simon Horman 2017-08-17 9:04 ` Biju Das
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox