linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 06/11] ASoC: sun4i-i2s: bclk and lrclk polarity tidyup
Date: Sat, 12 Aug 2017 13:00:54 +0200	[thread overview]
Message-ID: <20170812110059.5115-7-codekipper@gmail.com> (raw)
In-Reply-To: <20170812110059.5115-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

On newer SoCs the bit fields for the blck and lrclk polarity are in
a different locations. Use regmap fields to set the polarity bits
as intended.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 47 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 34 insertions(+), 13 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 482fe0c65c1f..a389cdf8c4dc 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -50,6 +50,8 @@
 #define SUN4I_I2S_FMT0_FMT_RIGHT_J			(2 << 0)
 #define SUN4I_I2S_FMT0_FMT_LEFT_J			(1 << 0)
 #define SUN4I_I2S_FMT0_FMT_I2S				(0 << 0)
+#define SUN4I_I2S_FMT0_POLARITY_INVERTED		(1)
+#define SUN4I_I2S_FMT0_POLARITY_NORMAL			(0)
 
 #define SUN4I_I2S_FMT1_REG		0x08
 #define SUN4I_I2S_FIFO_TX_REG		0x0c
@@ -101,6 +103,8 @@
  * @fmt_offset: Value by which wss and sr needs to be adjusted.
  * @field_fmt_wss: regmap field to set word select size.
  * @field_fmt_sr: regmap field to set sample resolution.
+ * @field_fmt_bclk: regmap field to set clk polarity.
+ * @field_fmt_lrclk: regmap field to set frame polarity.
  * @field_txchanmap: location of the tx channel mapping register.
  * @field_rxchanmap: location of the rx channel mapping register.
  * @field_txchansel: location of the tx channel select bit fields.
@@ -117,6 +121,8 @@ struct sun4i_i2s_quirks {
 	/* Register fields for i2s */
 	struct reg_field		field_fmt_wss;
 	struct reg_field		field_fmt_sr;
+	struct reg_field		field_fmt_bclk;
+	struct reg_field		field_fmt_lrclk;
 	struct reg_field		field_txchanmap;
 	struct reg_field		field_rxchanmap;
 	struct reg_field		field_txchansel;
@@ -137,6 +143,8 @@ struct sun4i_i2s {
 	/* Register fields for i2s */
 	struct regmap_field	*field_fmt_wss;
 	struct regmap_field	*field_fmt_sr;
+	struct regmap_field	*field_fmt_bclk;
+	struct regmap_field	*field_fmt_lrclk;
 	struct regmap_field	*field_txchanmap;
 	struct regmap_field	*field_rxchanmap;
 	struct regmap_field	*field_txchansel;
@@ -335,6 +343,8 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	u32 val;
+	u32 bclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
+	u32 lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
 
 	/* DAI Mode */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
@@ -359,32 +369,25 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_IB_IF:
 		/* Invert both clocks */
-		val = SUN4I_I2S_FMT0_BCLK_POLARITY_INVERTED |
-			SUN4I_I2S_FMT0_LRCLK_POLARITY_INVERTED;
+		bclk_polarity = SUN4I_I2S_FMT0_POLARITY_INVERTED;
+		lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_INVERTED;
 		break;
 	case SND_SOC_DAIFMT_IB_NF:
 		/* Invert bit clock */
-		val = SUN4I_I2S_FMT0_BCLK_POLARITY_INVERTED |
-			SUN4I_I2S_FMT0_LRCLK_POLARITY_NORMAL;
+		bclk_polarity = SUN4I_I2S_FMT0_POLARITY_INVERTED;
 		break;
 	case SND_SOC_DAIFMT_NB_IF:
 		/* Invert frame clock */
-		val = SUN4I_I2S_FMT0_LRCLK_POLARITY_INVERTED |
-			SUN4I_I2S_FMT0_BCLK_POLARITY_NORMAL;
+		lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_INVERTED;
 		break;
 	case SND_SOC_DAIFMT_NB_NF:
-		/* Nothing to do for both normal cases */
-		val = SUN4I_I2S_FMT0_BCLK_POLARITY_NORMAL |
-			SUN4I_I2S_FMT0_LRCLK_POLARITY_NORMAL;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
-			   SUN4I_I2S_FMT0_BCLK_POLARITY_MASK |
-			   SUN4I_I2S_FMT0_LRCLK_POLARITY_MASK,
-			   val);
+	regmap_field_write(i2s->field_fmt_bclk, bclk_polarity);
+	regmap_field_write(i2s->field_fmt_lrclk, lrclk_polarity);
 
 	/* DAI clock master masks */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -712,6 +715,8 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
 	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
 	.field_fmt_wss		= REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
 	.field_fmt_sr		= REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
+	.field_fmt_bclk		= REG_FIELD(SUN4I_I2S_FMT0_REG, 6, 6),
+	.field_fmt_lrclk	= REG_FIELD(SUN4I_I2S_FMT0_REG, 7, 7),
 	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
 	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
 	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
@@ -724,6 +729,8 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
 	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
 	.field_fmt_wss		= REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
 	.field_fmt_sr		= REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
+	.field_fmt_bclk		= REG_FIELD(SUN4I_I2S_FMT0_REG, 6, 6),
+	.field_fmt_lrclk	= REG_FIELD(SUN4I_I2S_FMT0_REG, 7, 7),
 	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
 	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
 	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
@@ -775,6 +782,20 @@ static int sun4i_i2s_init_regmap_fields(struct device *dev,
 		ret = PTR_ERR_OR_ZERO(i2s->field_fmt_sr);
 	}
 
+	if (!ret) {
+		i2s->field_fmt_bclk =
+			devm_regmap_field_alloc(dev, i2s->regmap,
+						i2s->variant->field_fmt_bclk);
+		ret = PTR_ERR_OR_ZERO(i2s->field_fmt_bclk);
+	}
+
+	if (!ret) {
+		i2s->field_fmt_lrclk =
+			devm_regmap_field_alloc(dev, i2s->regmap,
+						i2s->variant->field_fmt_lrclk);
+		ret = PTR_ERR_OR_ZERO(i2s->field_fmt_lrclk);
+	}
+
 	return ret;
 }
 
-- 
2.14.1

  parent reply	other threads:[~2017-08-12 11:00 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-12 11:00 [PATCH v3 00/11] ASoC: Add I2S support for Allwinner H3 SoCs codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 01/11] ASoC: sun4i-i2s: Add clkdiv offsets to quirks codekipper at gmail.com
2017-08-12 11:44   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-14 16:43   ` Applied "ASoC: sun4i-i2s: Add clkdiv offsets to quirks" to the asoc tree Mark Brown
2017-08-12 11:00 ` [PATCH v3 02/11] ASoC: sun4i-i2s: Add regmap config to quirks codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 03/11] ASoC: sun4i-i2s: Add TX FIFO offset " codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 04/11] ASoC: sun4i-i2s: Add regmap fields for channels codekipper at gmail.com
2017-08-12 12:08   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-12 11:00 ` [PATCH v3 05/11] ASoC: sun4i-i2s: Add regfields for word size select and sample resolution codekipper at gmail.com
2017-08-12 11:00 ` codekipper at gmail.com [this message]
2017-08-12 11:00 ` [PATCH v3 07/11] ASoC: sun4i-i2s: Add mclk enable regmap field codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 08/11] ASoC: sun4i-i2s: Add regmap field to set DAI format codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 09/11] ASoC: sun4i-i2s: Check for slave select bit codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 10/11] ASoC: sun4i-i2s: Update global enable with bitmask codekipper at gmail.com
2017-08-12 11:00 ` [PATCH v3 11/11] ASoC: sun4i-i2s: Add support for H3 codekipper at gmail.com
2017-08-12 12:27   ` [linux-sunxi] " Chen-Yu Tsai
2017-08-15  7:23     ` Code Kipper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170812110059.5115-7-codekipper@gmail.com \
    --to=codekipper@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).