From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx7d-pico: Add Wifi support
Date: Fri, 18 Aug 2017 09:51:55 +0800 [thread overview]
Message-ID: <20170818015154.GI7608@dragon> (raw)
In-Reply-To: <1502994320-27614-1-git-send-email-vanessa.maegima@nxp.com>
On Thu, Aug 17, 2017 at 03:25:20PM -0300, Vanessa Maegima wrote:
> imx7d-pico has an ap6212 wifi chip connected to usdhc2 port.
>
> Add support for the usdhc2 port and to the WL_REG_ON regulator
> so Wifi can be functional on this board.
>
> Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
> ---
> arch/arm/boot/dts/imx7d-pico.dts | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
> index e78c2c9..db9f345 100644
> --- a/arch/arm/boot/dts/imx7d-pico.dts
> +++ b/arch/arm/boot/dts/imx7d-pico.dts
> @@ -52,6 +52,17 @@
> reg = <0x80000000 0x80000000>;
> };
>
> + reg_ap6212: regulator-ap6212 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_ap6212>;
> + regulator-name = "AP6212";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
Bad indentation.
> + };
> +
> reg_2p5v: regulator-2p5v {
> compatible = "regulator-fixed";
> regulator-name = "2P5V";
> @@ -271,6 +282,17 @@
> status = "okay";
> };
>
> +&usdhc2 { /* Wifi SDIO */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + no-1-8-v;
> + non-removable;
> + keep-power-in-suspend;
> + wakeup-source;
> + vmmc-supply = <®_ap6212>;
> + status = "okay";
> +};
> +
> &usdhc3 {
> pinctrl-names = "default", "state_100mhz", "state_200mhz";
> pinctrl-0 = <&pinctrl_usdhc3>;
> @@ -326,6 +348,13 @@
> >;
> };
>
> + pinctrl_reg_ap6212: regap6212grp {
> + fsl,pins = <
> + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59
> + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 /* WL_HOST_WAKE */
I only see gpio4_16 is used in regulator-ap6212. Why do we need to set
up GPIO4_IO19 here?
Shawn
> + >;
> + };
> +
> pinctrl_sai1: sai1grp {
> fsl,pins = <
> MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
> @@ -348,6 +377,17 @@
> >;
> };
>
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX7D_PAD_SD2_CMD__SD2_CMD 0x59
> + MX7D_PAD_SD2_CLK__SD2_CLK 0x19
> + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
> + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
> + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
> + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
> + >;
> + };
> +
> pinctrl_usdhc3: usdhc3grp {
> fsl,pins = <
> MX7D_PAD_SD3_CMD__SD3_CMD 0x59
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2017-08-18 1:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-17 18:25 [PATCH] ARM: dts: imx7d-pico: Add Wifi support Vanessa Maegima
2017-08-18 1:51 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170818015154.GI7608@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox