From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/8] ASoC: sun4i-i2s: Add mclk enable regmap field
Date: Sat, 19 Aug 2017 14:48:35 +0200 [thread overview]
Message-ID: <20170819124839.4034-5-codekipper@gmail.com> (raw)
In-Reply-To: <20170819124839.4034-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
The location of the mclk output enable bit is different on newer
SoCs. Use a regmap field to enable it.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 8c7ad5bfe821..761b7c0f6a32 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -101,6 +101,7 @@
* @mclk_offset: Value by which mclkdiv needs to be adjusted.
* @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @fmt_offset: Value by which wss and sr needs to be adjusted.
+ * @field_clkdiv_mclk_en: regmap field to enable mclk output.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
* @field_fmt_bclk: regmap field to set clk polarity.
@@ -119,6 +120,7 @@ struct sun4i_i2s_quirks {
unsigned int fmt_offset;
/* Register fields for i2s */
+ struct reg_field field_clkdiv_mclk_en;
struct reg_field field_fmt_wss;
struct reg_field field_fmt_sr;
struct reg_field field_fmt_bclk;
@@ -141,6 +143,7 @@ struct sun4i_i2s {
struct snd_dmaengine_dai_dma_data playback_dma_data;
/* Register fields for i2s */
+ struct regmap_field *field_clkdiv_mclk_en;
struct regmap_field *field_fmt_wss;
struct regmap_field *field_fmt_sr;
struct regmap_field *field_fmt_bclk;
@@ -283,8 +286,9 @@ static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s,
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
- SUN4I_I2S_CLK_DIV_MCLK(mclk_div) |
- SUN4I_I2S_CLK_DIV_MCLK_EN);
+ SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
+
+ regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
return 0;
}
@@ -713,6 +717,7 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
.has_reset = false,
.reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
+ .field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 7, 7),
.field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
.field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
.field_fmt_bclk = REG_FIELD(SUN4I_I2S_FMT0_REG, 6, 6),
@@ -727,6 +732,7 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
+ .field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 7, 7),
.field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 2, 3),
.field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 5),
.field_fmt_bclk = REG_FIELD(SUN4I_I2S_FMT0_REG, 6, 6),
@@ -740,6 +746,12 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
static int sun4i_i2s_init_regmap_fields(struct device *dev,
struct sun4i_i2s *i2s)
{
+ i2s->field_clkdiv_mclk_en =
+ devm_regmap_field_alloc(dev, i2s->regmap,
+ i2s->variant->field_clkdiv_mclk_en);
+ if (IS_ERR(i2s->field_clkdiv_mclk_en))
+ return PTR_ERR(i2s->field_clkdiv_mclk_en);
+
i2s->field_fmt_wss =
devm_regmap_field_alloc(dev, i2s->regmap,
i2s->variant->field_fmt_wss);
--
2.14.1
next prev parent reply other threads:[~2017-08-19 12:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-19 12:48 [PATCH v5 0/8] ASoC: Add I2S support for Allwinner H3 SoCs codekipper at gmail.com
2017-08-19 12:48 ` [PATCH v5 1/8] ASoC: sun4i-i2s: Add regmap fields for channels codekipper at gmail.com
2017-08-19 15:11 ` [linux-sunxi] " Chen-Yu Tsai
2017-08-19 12:48 ` [PATCH v5 2/8] ASoC: sun4i-i2s: Add regfields for word size select and sample resolution codekipper at gmail.com
2017-08-19 12:48 ` [PATCH v5 3/8] ASoC: sun4i-i2s: bclk and lrclk polarity tidyup codekipper at gmail.com
2017-08-19 14:49 ` [linux-sunxi] " Chen-Yu Tsai
2017-08-19 12:48 ` codekipper at gmail.com [this message]
2017-08-19 15:12 ` [linux-sunxi] [PATCH v5 4/8] ASoC: sun4i-i2s: Add mclk enable regmap field Chen-Yu Tsai
2017-08-19 12:48 ` [PATCH v5 5/8] ASoC: sun4i-i2s: Add regmap field to set DAI format codekipper at gmail.com
2017-08-19 15:12 ` [linux-sunxi] " Chen-Yu Tsai
2017-08-19 12:48 ` [PATCH v5 6/8] ASoC: sun4i-i2s: Check for slave select bit codekipper at gmail.com
2017-08-19 12:48 ` [PATCH v5 7/8] ASoC: sun4i-i2s: Update global enable with bitmask codekipper at gmail.com
2017-08-19 12:48 ` [PATCH v5 8/8] ASoC: sun4i-i2s: Add support for H3 codekipper at gmail.com
2017-08-31 11:50 ` [PATCH v5 0/8] ASoC: Add I2S support for Allwinner H3 SoCs Code Kipper
2017-08-31 11:53 ` Code Kipper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170819124839.4034-5-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).