From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine Tenart) Date: Wed, 23 Aug 2017 10:11:12 +0200 Subject: [PATCH net-next v2 10/10] arm64: dts: marvell: mcbin: enable more networking ports In-Reply-To: <20170823072842.ibk6gqtswhamvppy@sapphire.tkos.co.il> References: <20170822170830.32413-1-antoine.tenart@free-electrons.com> <20170822170830.32413-11-antoine.tenart@free-electrons.com> <20170823072842.ibk6gqtswhamvppy@sapphire.tkos.co.il> Message-ID: <20170823081112.GC5202@kwain> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Baruch, On Wed, Aug 23, 2017 at 10:28:42AM +0300, Baruch Siach wrote: > On Tue, Aug 22, 2017 at 07:08:30PM +0200, Antoine Tenart wrote: > > This patch enables the two GE/SFP ports. They are configured in 10GKR > > mode by default. To do this the cpm_xdmio is enabled as well, and two > > phy descriptions are added. > > > > Signed-off-by: Antoine Tenart > > Tested-by: Marcin Wojtas > > --- > > arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 30 +++++++++++++++++++++++ > > 1 file changed, 30 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > > index abd39d1c1739..6cb4b000e1ac 100644 > > --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > > +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > > @@ -127,6 +127,30 @@ > > }; > > }; > > > > +&cpm_xmdio { > > + status = "okay"; > > + > > + phy0: ethernet-phy at 0 { > > + compatible = "ethernet-phy-ieee802.3-c45"; > > + reg = <0>; > > + }; > > + > > + phy1: ethernet-phy at 1 { > > Should be named 'ethernet-phy at 8' to match the 'reg' property. That's right. Thanks! Antoine -- Antoine T?nart, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: