From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine Tenart) Date: Thu, 24 Aug 2017 12:59:23 +0200 Subject: [EXT] Re: [PATCH net-next 10/18] net: mvpp2: use the GoP interrupt for link status changes In-Reply-To: References: <20170724134848.19330-1-antoine.tenart@free-electrons.com> <20170724134848.19330-11-antoine.tenart@free-electrons.com> <20170726162648.GK12049@lunn.ch> <20170823082510.GD5202@kwain> <5ebd192c54984b25adda0a294035b1b9@IL-EXCH01.marvell.com> <20170823160444.GC23960@kwain> Message-ID: <20170824105923.GF23960@kwain> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Marcin, On Wed, Aug 23, 2017 at 11:05:33PM +0200, Marcin Wojtas wrote: > 2017-08-23 18:04 GMT+02:00 Antoine Tenart : > > On Wed, Aug 23, 2017 at 03:24:55PM +0000, Stefan Chulski wrote: > >> > When the cable is connected (there is signal) and the serdes is in sync and AN > >> > succeeded. > >> > > >> > > With SFF/SFP ports, you generally need a gpio line the fibre module > >> > > can use to indicate if it has link. Fixed-phy has such support, and > >> > > your link_change function will get called when the link changes. > >> > > >> > So that would work when using SFP modules but I wonder if the GoP irq isn't > >> > needed when using passive cable, in which case this patch would still be needed > >> > (and of course we should support the new Russell phylib capabilities). > >> > >> Even if new phylib driver supports passive direct cables connection, > >> GoP IRQ required for SOHO/Peridot external switch support. > >> SOHO/Peridot external switch could be connected directly to Serdes line. > > > > So I guess the GoP link irq patches are needed. Should I resend them > > then? > > > > We'll have to discuss how to handle fixed-phy vs GoP IRQ, but I guess we > > can do this when adding the fixed-phy support later. > > > > Please check mvneta.c - you can find there coexistence of normal > libphy support, fixed phy and link irq for the inband management mode. > IMO it's exactly, what you need here. >>From what I see it should be pretty easy to support phy, fixed-phy and the GoP irq without breaking anything: if no phy is found in the dt, call of_phy_register_fixed_link() and if the fixed-phy property isn't found either use the GoP link IRQ. This way all the possibilities would be supported. So we should be able to support fixed-phy in a future series. Antoine -- Antoine T?nart, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: