From mboxrd@z Thu Jan  1 00:00:00 1970
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: Wed, 30 Aug 2017 12:21:36 +0200
Subject: [PATCH] net: stmmac: dwmac-sun8i: Use reset exclusive
In-Reply-To: <20170825171233.4xoihzakca3mqscd@flea.lan>
References: <20170825143805.21733-1-clabbe.montjoie@gmail.com>
 <20170825144832.3w6izhri5vstbndp@flea.lan>
 <20170825151733.GB9475@Red>
 <20170825171233.4xoihzakca3mqscd@flea.lan>
Message-ID: <20170830102136.GA21940@Red>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Fri, Aug 25, 2017 at 07:12:33PM +0200, Maxime Ripard wrote:
> On Fri, Aug 25, 2017 at 05:17:33PM +0200, Corentin Labbe wrote:
> > On Fri, Aug 25, 2017 at 04:48:32PM +0200, Maxime Ripard wrote:
> > > On Fri, Aug 25, 2017 at 04:38:05PM +0200, Corentin Labbe wrote:
> > > > The current dwmac_sun8i module cannot be rmmod/modprobe due to that
> > > > the reset controller was not released when removed.
> > > > 
> > > > This patch remove ambiguity, by using of_reset_control_get_exclusive and
> > > > add the missing reset_control_put().
> > > > 
> > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > > > ---
> > > >  drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
> > > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> > > > index fffd6d5fc907..675a09629d85 100644
> > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> > > > @@ -782,6 +782,7 @@ static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
> > > >  
> > > >  	clk_disable_unprepare(gmac->ephy_clk);
> > > >  	reset_control_assert(gmac->rst_ephy);
> > > > +	reset_control_put(gmac->rst_ephy);
> > > >  	return 0;
> > > >  }
> > > >  
> > > > @@ -942,7 +943,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
> > > >  			return -EINVAL;
> > > >  		}
> > > >  
> > > > -		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
> > > > +		gmac->rst_ephy = of_reset_control_get_exclusive(plat_dat->phy_node, NULL);
> > > 
> > > Why not just use devm_reset_control_get?
> > > 
> > 
> > Because there no devm_ functions with of_
> 
> devm_reset_control_get uses of_reset_control_get internally.

Hello

You are right.
But since the ephy reset is in a child node, devm_ does not find it.

Regards