From mboxrd@z Thu Jan 1 00:00:00 1970 From: dietmar.eggemann@arm.com (Dietmar Eggemann) Date: Wed, 30 Aug 2017 15:41:19 +0100 Subject: [PATCH 3/4] arm: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information In-Reply-To: <20170830144120.9312-1-dietmar.eggemann@arm.com> References: <20170830144120.9312-1-dietmar.eggemann@arm.com> Message-ID: <20170830144120.9312-4-dietmar.eggemann@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following 'capacity-dmips-mhz' dt property values are used: Cortex-A15: 1024, Cortex-A7: 539 They have been derived form the cpu_efficiency values: Cortex-A15: 3891, Cortex-A7: 2048 by scaling them so that the Cortex-A15s (big cores) use 1024. The cpu_efficiency values were originally derived from the "Big.LITTLE Processing with ARM Cortex?-A15 & Cortex-A7" white paper (http://www.cl.cam.ac.uk/~rdm34/big.LITTLE.pdf). Table 1 lists 1.9x (3891/2048) as the Cortex-A15 vs Cortex-A7 performance ratio for the Dhrystone benchmark. The following platforms are affected once cpu-invariant accounting support is re-connected to the task scheduler: odroidxu3, odroidxu3-lite, odroidxu4 Cc: Rob Herring Cc: Mark Rutland Cc: Russell King Cc: Kukjin Kim Cc: Krzysztof Kozlowski Signed-off-by: Dietmar Eggemann --- arch/arm/boot/dts/exynos5422-cpus.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index bf3c6f1ec4ee..ec01d8020c2d 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -35,6 +35,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu1: cpu at 101 { @@ -47,6 +48,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu2: cpu at 102 { @@ -59,6 +61,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu3: cpu at 103 { @@ -71,6 +74,7 @@ cooling-min-level = <0>; cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <539>; }; cpu4: cpu at 0 { @@ -84,6 +88,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu5: cpu at 1 { @@ -96,6 +101,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu6: cpu at 2 { @@ -108,6 +114,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; cpu7: cpu at 3 { @@ -120,6 +127,7 @@ cooling-min-level = <0>; cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ + capacity-dmips-mhz = <1024>; }; }; }; -- 2.11.0