From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Fri, 1 Sep 2017 14:59:59 +0200 Subject: [PATCH 7/7] ARM: dts: sun8i: h3: Enable AP6212 BT on uart3 on Nanopi M1 Plus In-Reply-To: <1504062070-13523-8-git-send-email-embed3d@gmail.com> References: <1504062070-13523-1-git-send-email-embed3d@gmail.com> <1504062070-13523-8-git-send-email-embed3d@gmail.com> Message-ID: <20170901125959.6ae37ez34vb7mh6d@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Aug 30, 2017 at 05:01:10AM +0200, Philipp Rossak wrote: > From: Philipp Rossak > > The BT side of the AP6212 WiFi/BT combo module is connected to > uart3. > > Enable BT on this board by enabling uart3 with using additionally > the cts and rts pins. > > Signed-off-by: Philipp Rossak I've queued this patch for 4.15, but... > --- > arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > index 3054308..8c12419 100644 > --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > @@ -49,6 +49,7 @@ > aliases { > ethernet0 = &emac; > ethernet1 = &ap6212; > + serial1 = &uart3; You'll also need an alias for serial 0 here. Can you send a follow up patch to do so? Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: