From: robert.jarzmik@free.fr (Robert Jarzmik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 09/12] ASoC: wm9712: add ac97 new bus support
Date: Sat, 2 Sep 2017 21:54:11 +0200 [thread overview]
Message-ID: <20170902195414.3699-10-robert.jarzmik@free.fr> (raw)
In-Reply-To: <20170902195414.3699-1-robert.jarzmik@free.fr>
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v4:
- added #ifdef spotted by Charles
---
sound/soc/codecs/Kconfig | 3 ++-
sound/soc/codecs/wm9712.c | 39 ++++++++++++++++++++++++++-------------
2 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index aebf148d7e4d..f17af3592785 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -206,7 +206,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
- select SND_SOC_WM9712 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
help
Normally ASoC codec drivers are only built if a machine driver which
@@ -1087,6 +1087,7 @@ config SND_SOC_WM9705
config SND_SOC_WM9712
tristate
select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WM9713
tristate
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 1a3e1797994a..7ebbb48b18c5 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -19,6 +20,8 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <sound/tlv.h>
@@ -30,6 +33,7 @@ struct wm9712_priv {
struct snd_ac97 *ac97;
unsigned int hp_mixer[2];
struct mutex lock;
+ struct wm97xx_platform_data *mfd_pdata;
};
static const struct reg_default wm9712_reg_defaults[] = {
@@ -636,18 +640,25 @@ static int wm9712_soc_probe(struct snd_soc_codec *codec)
struct regmap *regmap;
int ret;
- wm9712->ac97 = snd_soc_new_ac97_codec(codec, WM9712_VENDOR_ID,
- WM9712_VENDOR_ID_MASK);
- if (IS_ERR(wm9712->ac97)) {
- ret = PTR_ERR(wm9712->ac97);
- dev_err(codec->dev, "Failed to register AC97 codec: %d\n", ret);
- return ret;
- }
-
- regmap = regmap_init_ac97(wm9712->ac97, &wm9712_regmap_config);
- if (IS_ERR(regmap)) {
- ret = PTR_ERR(regmap);
- goto err_free_ac97_codec;
+ if (wm9712->mfd_pdata) {
+ wm9712->ac97 = wm9712->mfd_pdata->ac97;
+ regmap = wm9712->mfd_pdata->regmap;
+ } else {
+#ifdef CONFIG_SND_SOC_AC97_BUS
+ wm9712->ac97 = snd_soc_new_ac97_codec(codec, WM9712_VENDOR_ID,
+ WM9712_VENDOR_ID_MASK);
+ if (IS_ERR(wm9712->ac97)) {
+ ret = PTR_ERR(wm9712->ac97);
+ dev_err(codec->dev,
+ "Failed to register AC97 codec: %d\n", ret);
+ return ret;
+ }
+
+ regmap = regmap_init_ac97(wm9712->ac97, &wm9712_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto err_free_ac97_codec;
+#endif
}
snd_soc_codec_init_regmap(codec, regmap);
@@ -666,7 +677,8 @@ static int wm9712_soc_remove(struct snd_soc_codec *codec)
struct wm9712_priv *wm9712 = snd_soc_codec_get_drvdata(codec);
snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(wm9712->ac97);
+ if (!wm9712->mfd_pdata)
+ snd_soc_free_ac97_codec(wm9712->ac97);
return 0;
}
@@ -697,6 +709,7 @@ static int wm9712_probe(struct platform_device *pdev)
mutex_init(&wm9712->lock);
+ wm9712->mfd_pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, wm9712);
return snd_soc_register_codec(&pdev->dev,
--
2.11.0
next prev parent reply other threads:[~2017-09-02 19:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-02 19:54 [PATCH v6 00/12] AC97 device/driver model revamp Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 01/12] ALSA: ac97: split out the generic ac97 registers Robert Jarzmik
2017-09-03 7:15 ` [alsa-devel] " Takashi Iwai
2017-09-02 19:54 ` [PATCH v6 02/12] ALSA: ac97: add an ac97 bus Robert Jarzmik
2017-09-03 7:19 ` [alsa-devel] " Takashi Iwai
2017-09-02 19:54 ` [PATCH v6 03/12] ASoC: add new ac97 bus support Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 04/12] ASoC: arm: make pxa2xx-ac97-lib ac97 codec agnostic Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 05/12] Input: wm97xx: split out touchscreen registering Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 06/12] mfd: wm97xx-core: core support for wm97xx Codec Robert Jarzmik
2017-09-05 8:04 ` Lee Jones
2017-09-02 19:54 ` [PATCH v6 07/12] Input: wm97xx: add new AC97 bus support Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 08/12] ASoC: wm9713: add ac97 new " Robert Jarzmik
2017-09-02 19:54 ` Robert Jarzmik [this message]
2017-09-04 10:18 ` [PATCH v6 09/12] ASoC: wm9712: " Charles Keepax
2017-09-04 13:14 ` Robert Jarzmik
2017-09-04 16:42 ` Mark Brown
2017-09-02 19:54 ` [PATCH v6 10/12] ASoC: wm9705: add private structure Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 11/12] ASoC: wm9705: add ac97 new bus support Robert Jarzmik
2017-09-02 19:54 ` [PATCH v6 12/12] ASoC: pxa: switch to new ac97 " Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170902195414.3699-10-robert.jarzmik@free.fr \
--to=robert.jarzmik@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox