From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 4 Sep 2017 10:04:15 +0200 Subject: [PATCH v2 1/2] ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus In-Reply-To: <495813cc0e2ea09e495bfe14d595b926@aosc.io> References: <1504283401-4263-1-git-send-email-embed3d@gmail.com> <1504283401-4263-2-git-send-email-embed3d@gmail.com> <495813cc0e2ea09e495bfe14d595b926@aosc.io> Message-ID: <20170904080415.ptgjnkjwtdthp7ds@flea> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Sep 02, 2017 at 03:01:57PM +0800, icenowy at aosc.io wrote: > ? 2017-09-02 00:30?Philipp Rossak ??? > > From: Philipp Rossak > > > > The WiFi side of the AP6212 WiFi/BT combo module is connected to > > mmc1. There are also GPIOs for enable and interrupts. > > > > Enable WiFi on this board by enabling mmc1 and adding the power > > sequencing clocks and GPIO, as well as the chip's interrupt line. > > > > Signed-off-by: Philipp Rossak > > --- > > arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 > > +++++++++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > > > diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > > b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > > index 6256f55..7d18c35 100644 > > --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > > +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts > > @@ -48,6 +48,13 @@ > > > > aliases { > > serial1 = &uart3; > > + ethernet1 = &sdio_wifi; > > When the Wi-Fi module itself has fixed MAC address, there's > no need for such an alias. But the description is also accurate, which is what matters in the DT. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: