Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit
@ 2017-09-07  9:05 Juergen Borleis
  2017-09-07  9:05 ` [PATCH 1/9] ARM: dts: TQma53: regulators are no bus Juergen Borleis
                   ` (8 more replies)
  0 siblings, 9 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

This series is a cleanup of the devicetree for the TQ's 'TQma53' CPU card
in conjunction with its 'mba53' development baseboard. The cleanup should also
simplify the use of the 'TQma53' CPU card for a customized baseboard instead of
the development baseboard.

Comments are welcome.

Juergen

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/9] ARM: dts: TQma53: regulators are no bus
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 2/9] ARM: dts: TQma53: define GPIO's active level by macro instead of anonymous number Juergen Borleis
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 33 +++++++++++++--------------------
 arch/arm/boot/dts/imx53-tqma53.dtsi | 19 ++++++-------------
 2 files changed, 19 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index df705ba48897f..11c61844d5d85 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -44,27 +44,20 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_backlight: regulator at 0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd-supply";
-			gpio = <&gpio2 5 0>;
-			startup-delay-us = <5000>;
-		};
 
-		reg_3p2v: regulator at 1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
+	reg_backlight: backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-supply";
+		gpio = <&gpio2 5 0>;
+		startup-delay-us = <5000>;
+	};
+
+	reg_3p2v: base3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index eecdc1c55eefc..4aff91e31f288 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -20,19 +20,12 @@
 		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator at 0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: card3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 };
 
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 2/9] ARM: dts: TQma53: define GPIO's active level by macro instead of anonymous number
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
  2017-09-07  9:05 ` [PATCH 1/9] ARM: dts: TQma53: regulators are no bus Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 3/9] ARM: dts: TQma53: define IRQ's " Juergen Borleis
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 11c61844d5d85..5a21562a2dc1b 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -48,7 +48,7 @@
 	reg_backlight: backlight {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd-supply";
-		gpio = <&gpio2 5 0>;
+		gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <5000>;
 	};
 
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 3/9] ARM: dts: TQma53: define IRQ's active level by macro instead of anonymous number
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
  2017-09-07  9:05 ` [PATCH 1/9] ARM: dts: TQma53: regulators are no bus Juergen Borleis
  2017-09-07  9:05 ` [PATCH 2/9] ARM: dts: TQma53: define GPIO's active level by macro instead of anonymous number Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 4/9] ARM: dts: TQma53: ESDHC2: use correct IO lines power supply Juergen Borleis
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-tqma53.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4aff91e31f288..eedeced3c8810 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -256,7 +256,7 @@
 		reg = <0x8>;
 		fsl,mc13xxx-uses-rtc;
 		interrupt-parent = <&gpio2>;
-		interrupts = <6 4>; /* PATA_DATA6, active high */
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	sensor1: lm75 at 48 {
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 4/9] ARM: dts: TQma53: ESDHC2: use correct IO lines power supply
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
                   ` (2 preceding siblings ...)
  2017-09-07  9:05 ` [PATCH 3/9] ARM: dts: TQma53: define IRQ's " Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 5/9] ARM: dts: TQma53: define eMMC's " Juergen Borleis
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

According to the devicetree bindings the 'vmmc' power supply is the SD
card's power supply and 'vqmmc' is the IO line's power supply.

The i.MX53's ESDHC2 unit on the 'TQma53' CPU card is dedicated to be used
with an externally connected SD card. The on-board power supply is connected
to the SDHC2 IO lines only. The SD card socket is not part of the CPU card,
so the 'vmmc' info must be part of the baseboard devicetree.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 1 +
 arch/arm/boot/dts/imx53-tqma53.dtsi | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 5a21562a2dc1b..69733c8473d2b 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -193,6 +193,7 @@
 };
 
 &esdhc2 {
+	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index eedeced3c8810..ceba1004038b1 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
-	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 5/9] ARM: dts: TQma53: define eMMC's power supply
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
                   ` (3 preceding siblings ...)
  2017-09-07  9:05 ` [PATCH 4/9] ARM: dts: TQma53: ESDHC2: use correct IO lines power supply Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 6/9] ARM: dts: TQma53: fix and move regulator to its correct location Juergen Borleis
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

The eMMC is part of the 'TQma53' CPU card and powered by its on-board power
supply.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-tqma53.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index ceba1004038b1..fa5d712bd47b8 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -57,6 +57,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	non-removable;
 	bus-width = <8>;
 	status = "okay";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 6/9] ARM: dts: TQma53: fix and move regulator to its correct location
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
                   ` (4 preceding siblings ...)
  2017-09-07  9:05 ` [PATCH 5/9] ARM: dts: TQma53: define eMMC's " Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 7/9] ARM: dts: TQma53: move PMIC's IRQ pin control where it belongs to Juergen Borleis
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

The referenced 3.3 V regulator is a 3.2 V regulator and part of the 'TQma53'
CPU card instead of the development 'mba53' baseboard. So fix the voltage
and move it to where it belongs to.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 10 +---------
 arch/arm/boot/dts/imx53-tqma53.dtsi | 14 +++++++-------
 2 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 69733c8473d2b..5b9e9af14aa6c 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -52,14 +52,6 @@
 		startup-delay-us = <5000>;
 	};
 
-	reg_3p2v: base3p2v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P2V";
-		regulator-min-microvolt = <3200000>;
-		regulator-max-microvolt = <3200000>;
-		regulator-always-on;
-	};
-
 	sound {
 		compatible = "tq,imx53-mba53-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -193,7 +185,7 @@
 };
 
 &esdhc2 {
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&reg_3p2v>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index fa5d712bd47b8..02eb3f4b605de 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -20,11 +20,11 @@
 		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
 	};
 
-	reg_3p3v: card3p3v {
+	reg_3p2v: card3p2v {
 		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
 		regulator-always-on;
 	};
 };
@@ -33,7 +33,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p2v>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
@@ -56,8 +56,8 @@
 &esdhc3 { /* EMMC */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&reg_3p2v>;
+	vqmmc-supply = <&reg_3p2v>;
 	non-removable;
 	bus-width = <8>;
 	status = "okay";
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 7/9] ARM: dts: TQma53: move PMIC's IRQ pin control where it belongs to
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
                   ` (5 preceding siblings ...)
  2017-09-07  9:05 ` [PATCH 6/9] ARM: dts: TQma53: fix and move regulator to its correct location Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 8/9] ARM: dts: TQma53: move network phy reset GPIO " Juergen Borleis
  2017-09-07  9:05 ` [PATCH 9/9] ARM: dts: TQma53: describe the full power supply tree Juergen Borleis
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

Signal needs SoC's internal pull down.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-tqma53.dtsi | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 02eb3f4b605de..1c5cd103ed841 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -74,7 +74,6 @@
 				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
 				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
 				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
 				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
 				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
 				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
@@ -205,6 +204,12 @@
 				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
 			>;
 		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA6__GPIO2_6		0x000001c0
+			>;
+		};
 	};
 };
 
@@ -254,6 +259,8 @@
 
 	pmic: mc34708 at 8 {
 		compatible = "fsl,mc34708";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x8>;
 		fsl,mc13xxx-uses-rtc;
 		interrupt-parent = <&gpio2>;
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 8/9] ARM: dts: TQma53: move network phy reset GPIO where it belongs to
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
                   ` (6 preceding siblings ...)
  2017-09-07  9:05 ` [PATCH 7/9] ARM: dts: TQma53: move PMIC's IRQ pin control where it belongs to Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  2017-09-07  9:05 ` [PATCH 9/9] ARM: dts: TQma53: describe the full power supply tree Juergen Borleis
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

Signal has an external pullup and works with weakest settings (driver
strength and speed).

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 7 +++++++
 arch/arm/boot/dts/imx53-tqma53.dtsi | 1 -
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 5b9e9af14aa6c..fb50ed8cc8f47 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -139,6 +139,12 @@
 				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
 			>;
 		};
+
+		pinctrl_fec_reset: fecreset-grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_0__GPIO7_6	0x00000000
+			>;
+		};
 	};
 };
 
@@ -180,6 +186,7 @@
 };
 
 &fec {
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_reset>;
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 1c5cd103ed841..1ab5fbab1d728 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -78,7 +78,6 @@
 				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
 				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
 				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
 				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
 			>;
 		};
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH 9/9] ARM: dts: TQma53: describe the full power supply tree
  2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
                   ` (7 preceding siblings ...)
  2017-09-07  9:05 ` [PATCH 8/9] ARM: dts: TQma53: move network phy reset GPIO " Juergen Borleis
@ 2017-09-07  9:05 ` Juergen Borleis
  8 siblings, 0 replies; 10+ messages in thread
From: Juergen Borleis @ 2017-09-07  9:05 UTC (permalink / raw)
  To: linux-arm-kernel

       |<--- mba53 devel baseboard --->|<----- TQma53 CPU card ----->|
       |                               |                             |
+12 V -|-o--> 3.3 V ----> internal use |                             |
       | |                             |                             |
       | \--> 5.0 V -o--> internal use | /--> 3.8 V --> PMIC         |
       |             |                 | |                           |
       |             \---------------->|-o--> 3.2 V --> internal use |
       |                               |

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 36 +++++++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/imx53-tqma53.dtsi |  9 +++++++++
 2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index fb50ed8cc8f47..b5e1b9b373bf5 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -44,6 +44,32 @@
 		};
 	};
 
+	main_power_in_12p0v: mainpowerin {
+		/* external power-in */
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: base5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_power_in_12p0v>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: base3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_power_in_12p0v>;
+		regulator-always-on;
+	};
 
 	reg_backlight: backlight {
 		compatible = "regulator-fixed";
@@ -67,6 +93,14 @@
 	};
 };
 
+&reg_3p2v {
+	vin-supply = <&reg_5p0v>;
+};
+
+&reg_3p8v {
+	vin-supply = <&reg_5p0v>;
+};
+
 &ldb {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lvds1_1>;
@@ -192,7 +226,7 @@
 };
 
 &esdhc2 {
-	vmmc-supply = <&reg_3p2v>;
+	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 1ab5fbab1d728..ff4608b7318f4 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -27,6 +27,14 @@
 		regulator-max-microvolt = <3200000>;
 		regulator-always-on;
 	};
+
+	reg_3p8v: card3p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P8V";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+	};
 };
 
 &esdhc2 {
@@ -264,6 +272,7 @@
 		fsl,mc13xxx-uses-rtc;
 		interrupt-parent = <&gpio2>;
 		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		/* power supply input is &reg_3p8v */
 	};
 
 	sensor1: lm75 at 48 {
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2017-09-07  9:05 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-09-07  9:05 Cleanup devicetree for the i.MX53 based TQma53 + mba53 development kit Juergen Borleis
2017-09-07  9:05 ` [PATCH 1/9] ARM: dts: TQma53: regulators are no bus Juergen Borleis
2017-09-07  9:05 ` [PATCH 2/9] ARM: dts: TQma53: define GPIO's active level by macro instead of anonymous number Juergen Borleis
2017-09-07  9:05 ` [PATCH 3/9] ARM: dts: TQma53: define IRQ's " Juergen Borleis
2017-09-07  9:05 ` [PATCH 4/9] ARM: dts: TQma53: ESDHC2: use correct IO lines power supply Juergen Borleis
2017-09-07  9:05 ` [PATCH 5/9] ARM: dts: TQma53: define eMMC's " Juergen Borleis
2017-09-07  9:05 ` [PATCH 6/9] ARM: dts: TQma53: fix and move regulator to its correct location Juergen Borleis
2017-09-07  9:05 ` [PATCH 7/9] ARM: dts: TQma53: move PMIC's IRQ pin control where it belongs to Juergen Borleis
2017-09-07  9:05 ` [PATCH 8/9] ARM: dts: TQma53: move network phy reset GPIO " Juergen Borleis
2017-09-07  9:05 ` [PATCH 9/9] ARM: dts: TQma53: describe the full power supply tree Juergen Borleis

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).